Short-term results of the M2a-taper metal-on-metal articulation.

A polyethylene-free, metal-on-metal acetabular system (M2a-taper [Biomet, Inc., Warsaw, IN]) was designed in an effort to improve total hip arthroplasty (THA) longevity. Minimum 2-year follow-up results involving 72 polyethylene liner THAs and 78 metal liner THAs from a multicenter, randomized, controlled, investigational device exemption study are reported. Mean Harris hip scores of 95.54 (polyethylene liner group) and 95.23 (metal liner group) were reported at mean follow-up intervals of 3.29 and 3.23 years. Radiographic evaluation revealed no evidence of early failure. No acetabular components have been revised or are pending revision. No statistically significant differences in the data were calculated between liner types except for the immediate postoperative (P=.0415) and minimum 2-year follow-up (P=.0341) angles of inclination. The M2a-taper metal-on-metal articulation may represent a viable alternative for THA in younger, higher demand patients.

[1]  F. P. Patterson,et al.  The McKee-Farrar total hip replacement. Preliminary results and complications of 368 operations performed in five general hospitals. , 1972, The Journal of bone and joint surgery. American volume.

[2]  M. Kothari,et al.  Surface Geometry of Retrieved McKee-Farrar Total Hip Replacements , 1996, Clinical orthopaedics and related research.

[3]  R. Streicher The case for using metal-on-metal , 1998 .

[4]  Jack R. Worrall,et al.  Metal wear particle characterization from metal on metal total hip replacements: transmission electron microscopy study of periprosthetic tissues and isolated particles. , 1998, Journal of biomedical materials research.

[5]  P. Campbell,et al.  Tissue Reaction to Metal on Metal Total Hip Prostheses , 1996, Clinical orthopaedics and related research.

[6]  R. Schenk,et al.  Wear Behavior and Histopathology of Classic Cemented Metal on Metal Hip Endoprostheses , 1996, Clinical orthopaedics and related research.

[7]  M. Postel,et al.  15 Total Prosthetic Replacement in Rapidly Destructive Arthrosis of the Hip Joint , 1970, Clinical orthopaedics and related research.

[8]  P. Freeman McKee-Farrar total replacement of the hip joint in rheumatoid arthritis and allied conditions. , 1970, Clinical orthopaedics and related research.

[9]  R. Chiesa,et al.  In vivo wear of three types of metal on metal hip prostheses during two decades of use. , 1996, Clinical orthopaedics and related research.

[10]  W. Harris,et al.  Long-duration metal-on-metal total hip arthroplasties with low wear of the articulating surfaces. , 1996, The Journal of arthroplasty.

[11]  W. Gillespie,et al.  Development of Hematopoietic Cancers After Implantation of Total Joint Replacement , 1996, Clinical orthopaedics and related research.

[12]  P. Paavolainen,et al.  Cancer Risk After Metal on Metal and Polyethylene on Metal Total Hip Arthroplasty , 1996, Clinical orthopaedics and related research.

[13]  H. Weber,et al.  Cobalt Chromium Molybdenum Metal Combination for Modular Hip Prostheses , 1996, Clinical orthopaedics and related research.

[14]  L. Dorr,et al.  Total Hip Arthroplasty with Use of the Metasul Metal-on-Metal Articulation: Four to Seven-Year Results* , 2000, The Journal of bone and joint surgery. American volume.

[15]  E. Ebramzadeh,et al.  Lessons learned from loosening of the McKee-Farrar metal-on-metal total hip replacement. , 1999, The Journal of arthroplasty.

[16]  G. Bentley,et al.  A comparative review of the McKee-Farrar and Charnley total hip prostheses. , 1973, Clinical orthopaedics and related research.

[17]  J. Galante,et al.  Metal Release in Patients Who Have Had a Primary Total Hip Arthroplasty. A Prospective, Controlled, Longitudinal Study* , 1998, The Journal of bone and joint surgery. American volume.

[18]  J. Charnley,et al.  Radiological demarcation of cemented sockets in total hip replacement. , 1976, Clinical orthopaedics and related research.

[19]  A. Kaider,et al.  Elevated Serum Cobalt With Metal-on-metal Articulating Surfaces , 1997 .

[20]  M Wagner,et al.  Medium-Term Results of a Modern Metal-on-Metal System in Total Hip Replacement , 2000, Clinical orthopaedics and related research.

[21]  P. D. Wilson,et al.  Total hip replacement with fixation by acrylic cement. A preliminary study of 100 consecutive McKee-Farrar prosthetic replacements. , 1972, The Journal of bone and joint surgery. American volume.

[22]  C. Case,et al.  Preliminary Observations on Possible Premalignant Changes in Bone Marrow Adjacent to Worn Total Hip Arthroplasty Implants , 1996, Clinical orthopaedics and related research.

[23]  P. Campbell,et al.  Cobalt and Chromium Concentrations in Patients With Metal on Metal Total Hip Replacements , 1996, Clinical orthopaedics and related research.

[24]  W. Harris,et al.  Traumatic arthritis of the hip after dislocation and acetabular fractures: treatment by mold arthroplasty. An end-result study using a new method of result evaluation. , 1969, The Journal of bone and joint surgery. American volume.

[25]  R Poss,et al.  Clinical and radiographic evaluation of total hip replacement. A standard system of terminology for reporting results. , 1990, The Journal of bone and joint surgery. American volume.

[26]  Joshua J. Jacobs,et al.  Corrosion of metal orthopaedic implants. , 1998, The Journal of bone and joint surgery. American volume.

[27]  K. Soffe,et al.  Effect of acetabular component orientation on recurrent dislocation, pelvic osteolysis, polyethylene wear, and component migration. , 1998, The Journal of arthroplasty.

[28]  M. Péoc'h,et al.  Dissemination of Wear Particles to the Liver, Spleen, and Abdominal Lymph Nodes of Patients with Hip or Knee Replacement* , 2000, The Journal of bone and joint surgery. American volume.

[29]  Harlan C. Amstutz,et al.  Metal on Metal Bearings in Hip Arthroplasty , 1996, Clinical orthopaedics and related research.

[30]  H. Amstutz,et al.  "Modes of failure" of cemented stem-type femoral components: a radiographic analysis of loosening. , 1979, Clinical orthopaedics and related research.