Internet-based framework to support integration of the customer in the design of customizable products

A necessary element to design and produce customer-centric products is the integration of customers in the design process. Challenges faced during customer integration into the design process include generating models of the customized product, performing analysis of these to determine feasibility, and optimizing to increase the performance. These tasks have to be performed relatively quickly, if not in real time, to provide feedback to the customer. The focus of this article is to present a framework that utilizes CAD, finite element analysis (FEA), and optimization to integrate the customer into the design process via the Internet for delivering user customized products. The design analysis, evaluation, and optimization need to be automated and enhanced to enable operation over the Internet. A product family CAD/FEA template has been developed to perform analysis, along with a general formulation to optimize the customized product. The CAD/FEA template generalizes the geometry building and analysis of each configuration developed using a product platform approach. The proposed setup is demonstrated through the use of a bicycle frame family. In this study, the focus is on the application of optimization and FEA to facilitate the design of customer-centric products.

[1]  Zahed Siddique,et al.  Common platform development :designing for product variety , 2000 .

[2]  Mitchell M. Tseng,et al.  The Customer Centric Enterprise: Advances in Mass Customization and Personalization , 2003 .

[3]  Karthikeyan Umapathy,et al.  Development of a Framework for Web-Based Product Platform Customization , 2003, J. Comput. Inf. Sci. Eng..

[4]  C. Greg Jensen,et al.  A Web Enabled Process for Accessing Customized Parametric Designs , 2002, DAC 2002.

[5]  Zahed Siddique,et al.  An Agent Based Framework to Automatically Generate 3D CAD Models of Customer Specified Products , 2003 .

[6]  Gilmore Jh,et al.  The four faces of mass customization. , 1997 .

[7]  Michael P. Martinez,et al.  Effective Product Family Design Using Physical Programming , 2002 .

[8]  Javier P. Gonzalez-Zugasti,et al.  Modular product architecture , 2001 .

[9]  Mitchell M. Tseng,et al.  Case-based evolutionary design for mass customization , 1997 .

[10]  George Q. Huang,et al.  Web-based product platform development using graph theory , 2002, IEEE International Engineering Management Conference.

[11]  Zahed Siddique,et al.  Internet Based Framework to Perform Automated FEA on User Customized Products , 2003, DAC 2003.

[12]  Zahed Siddique,et al.  Automatic Generation of Product Family Member CAD Models Supported by a Platform Using a Template Approach , 2002 .

[13]  Rebecca Duray,et al.  Improving customer satisfaction through mass customization , 1999 .

[14]  Xuan F. Zha,et al.  Knowledge Intensive Support for Product Family Design , 2002, DAC 2002.

[15]  Klaus-Dieter Thoben,et al.  Customer Driven Manufacturing Versus Mass Customization , 2003 .

[16]  David W. Rosen,et al.  ON THE APPLICABILITY OF PRODUCT VARIETY DESIGN CONCEPTS TO AUTOMOTIVE PLATFORM COMMONALITY , 1998 .

[17]  Jc Johan Wortmann,et al.  Customer-driven manufacturing , 1996 .