Evaluation of ultra-low expansion spacer in the Fabry-Perot cavity with optical frequency comb

The work presents measurements of the length stability of Zerodur glass ceramic with temperature change. Measurement of this thermal characteristic is necessary for determination of the optimal temperature at which the Zerodur glass ceramic has a coefficient of thermal expansion close to zero. The principle of the measurement is to monitor the length changes using an optical resonator with a cavity mirror spacer made from the Zerodur material to be studied. The resonator is placed inside a vacuum chamber with a temperature control. A tunable laser diode is locked to a certain optical mode of the resonator to monitor the optical frequency of this mode. A beat-note signal from optical mixing between the laser and a stabilized femtosecond frequency comb is detected and processed. The temperature dependence of the glass ceramics was determined and analyzed. The resolution of the length measurement of the experimental set-up is on the order of 0.1 nm.

[1]  Scott A. Diddams,et al.  Optical Frequency Synthesis and Comparison with Uncertainty at the 10-19 Level , 2004, Science.

[2]  Y. Awaji,et al.  Accurate optical frequency atlas of the 1.5-µm bands of acetylene , 1996 .

[3]  James H. Burge,et al.  THERMAL EXPANSION OF BOROSILICATE GLASS, ZERODUR, ZERODUR M, AND UNCERAMIZED ZERODUR AT LOW TEMPERATURES , 1999 .

[4]  J. L. Hall,et al.  Precision phase control of an ultrawide-bandwidth femtosecond laser: a network of ultrastable frequency marks across the visible spectrum. , 2000, Optics letters.

[5]  Jun Ye,et al.  Optical Frequency Synthesis Based on Mode- Locked Lasers , 2001 .

[6]  Günter Steinmeyer,et al.  Carrier-envelope offset phase control: A novel concept for absolute optical frequency measurement and ultrashort pulse generation , 1999 .

[7]  Josef Lazar,et al.  Monitor of mirror distance of Fabry-Perot cavity by the use of stabilized femtosecond laser comb , 2010, Polish-Slovak-Czech Optical Conference on Wave and Quantum Aspects of Contemporary Optics.

[8]  A. Stentz,et al.  Visible continuum generation in air–silica microstructure optical fibers with anomalous dispersion at 800 nm , 2000 .

[9]  O. Číp,et al.  Precise length etalon controlled by stabilized frequency comb , 2008 .

[10]  Josef Lazar,et al.  Evaluation of thermal expansion coefficient of Fabry-Perot cavity using an optical frequency comb , 2011, Optical Metrology.

[11]  Lennart Robertsson,et al.  Femtosecond-laser-based optical clockwork with instability, 2002, Optics letters.

[12]  B. Mikel,et al.  Conversion of stability of femtosecond mode-locked laser to optical cavity length , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[13]  Jun Ye,et al.  Colloquium: Femtosecond optical frequency combs , 2003 .

[14]  T. Hänsch,et al.  Phase-locked white-light continuum pulses: toward a universal optical frequency-comb synthesizer. , 2000, Optics letters.

[15]  W. Pannhorst,et al.  Thermal expansion and length stability of Zerodur in dependence on temperature and time. , 1985, Applied optics.