论文信息 - Automation and control issues applied to a heat exchanger prototype

Automation and control issues applied to a heat exchanger prototype

The main objective of this paper is to present an innovative equipment for practical teaching in control engineering, paying special attention to its conceptualisation and its possibilities for the theoretical-practical training. The role of the control and automation issues applied to this prototype is discussed. A distributed control system (DCS) applied to this prototype and its possibilities will be introduced

Juan J. Gude | Evaristo Kahoraho | Josu Etxaniz | J. Hernandez

[1] Armando B. Corripio,et al. Tuning of Industrial Control Systems , 1990 .

[2] Jens G. Balchen,et al. Process Control: Structures and Applications , 1987 .

[3] Aidan O'Dwyer,et al. Handbook of PI and PID controller tuning rules , 2003 .

[4] Dennis S. Bernstein,et al. On bridging the theory/practice gap , 1999 .

[5] Juan J. Gude Prego,et al. Control Systems Design for Practical Teaching , 2003 .

[6] Josef Weigmann,et al. Decentralization with PROFIBUS-DP: Architecture and Fundamentals, Configuration and Use with SIMATIC S7 , 2000 .

[7] J. G. Ziegler,et al. Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.

[8] F. G. Shinskey,et al. Process Control: As Taught vs as Practiced , 2002 .

[9] Tore Hägglund,et al. Advances in Pid Control , 1999 .

[10] Armando B. Corripio,et al. Principles and Practice of Automatic Process Control , 1985 .

[11] Juan J. Gude,et al. Proposal of equipment for practical teaching in control engineering: extension to remote laboratories , 2007 .

[12] F. G. Greg Shinskey,et al. Process Control Systems: Application, Design and Tuning , 1990 .