Instantaneous delamination detection in a composite plate using a dual piezoelectric transducer network
暂无分享,去创建一个
Hyung Jin Lim | Hoon Sohn | Jeong-Beom Ihn | Chul Min Yeum | J. Ihn | C. Yeum | H. Sohn | H. Lim
[1] Pizhong Qiao,et al. Application of Wave Propagation Analysis for Damage Identification in Composite Laminated Beams , 2005 .
[2] Pizhong Qiao,et al. Modeling and experimental detection of damage in various materials using the pulse-echo method and piezoelectric sensors/actuators , 2005, Smart Materials and Structures.
[3] Jeong-Beom Ihn,et al. Pitch-catch Active Sensing Methods in Structural Health Monitoring for Aircraft Structures , 2008 .
[4] Costas Soutis,et al. Real-time nondestructive evaluation of fiber composite laminates using low-frequency Lamb waves. , 2002, The Journal of the Acoustical Society of America.
[5] Dong Wang,et al. Probability of the presence of damage estimated from an active sensor network in a composite panel of multiple stiffeners , 2009 .
[6] Hoon Sohn,et al. Automated detection of delamination and disbond from wavefield images obtained using a scanning laser vibrometer , 2011 .
[7] P. Cawley,et al. The interaction of Lamb waves with delaminations in composite laminates , 1993 .
[8] Stéphane Mallat,et al. Matching pursuits with time-frequency dictionaries , 1993, IEEE Trans. Signal Process..
[9] Victor Giurgiutiu,et al. Embedded non-destructive evaluation for structural health monitoring, damage detection, and failure prevention , 2005 .
[10] Yoon Young Kim,et al. The matching pursuit approach based on the modulated Gaussian pulse for efficient guided-wave damage inspection , 2005 .
[11] V. Giurgiutiu,et al. In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection. , 2008, Ultrasonics.
[12] Krishnan Balasubramaniam,et al. Delamination Size Detection using Time of Flight of Anti-symmetric (Ao) and Mode Converted Ao mode of Guided Lamb Waves , 2010 .
[13] Jan Drewes Achenbach,et al. Group delay measurements using modally selective Lamb wave transducers for detection and sizing of delaminations in composites , 2008 .
[14] Yiu-Wing Mai,et al. Delamination detection in smart composite beams using Lamb waves , 2004 .
[15] Véronique Michaud,et al. Impact localisation with FBG for a self-healing carbon fibre composite structure , 2011 .
[16] Carlos E. S. Cesnik,et al. Modeling of piezoelectric-based Lamb wave generation and sensing for structural health monitoring , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[17] Shi-Chang Wooh,et al. Synthetic phase tuning of guided waves , 2001, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[18] Hoon Sohn,et al. Delamination detection in composites through guided wave field image processing , 2011 .
[19] Lin Ye,et al. Guided Lamb waves for identification of damage in composite structures: A review , 2006 .
[20] Joseph L. Rose,et al. Guided wave phased array beam steering in composite plates , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[21] S. Salamone,et al. Temperature effects in ultrasonic Lamb wave structural health monitoring systems. , 2008, The Journal of the Acoustical Society of America.
[22] J. Ihn,et al. Lamb wave mode decomposition using concentric ring and circular piezoelectric transducers , 2011 .
[23] Joseph L. Rose,et al. A comb transducer for mode control in guided wave NDE , 1997, 1997 IEEE Ultrasonics Symposium Proceedings. An International Symposium (Cat. No.97CH36118).
[24] Massimo Ruzzene,et al. Damage visualization via beamforming of frequency-wavenumber filtered wavefield data , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[25] N. Toyama,et al. Quantitative damage detection in cross-ply laminates using Lamb wave method , 2003 .
[26] Constantinos Soutis,et al. Damage detection in composite materials using lamb wave methods , 2002 .
[27] Joël Cugnoni,et al. Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part I: Impact detection and localization , 2012 .
[28] J. Michaels,et al. A methodology for structural health monitoring with diffuse ultrasonic waves in the presence of temperature variations. , 2005, Ultrasonics.
[29] Hoon Sohn,et al. Effects of environmental and operational variability on structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.
[30] Yosuke Nagao,et al. Damage monitoring of CFRP stiffened panels under compressive load using FBG sensors , 2012 .
[31] Hoon Sohn,et al. Instantaneous reference-free crack detection based on polarization characteristics of piezoelectric materials , 2007 .
[32] Hoon Sohn,et al. Lamb wave tuning curve calibration for surface-bonded piezoelectric transducers , 2009 .
[33] Walter L. Deemer,et al. Estimation of Parameters of Truncated or Censored Exponential Distributions , 1955 .
[34] Daniel J. Inman,et al. Reference-free damage detection using instantaneous baseline measurements , 2009 .
[35] Hoon Sohn,et al. Development of dual PZT transducers for reference-free crack detection in thin plate structures , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[36] Carlos E. S. Cesnik,et al. Review of guided-wave structural health monitoring , 2007 .
[37] Martin Veidt,et al. A Lamb-wave-based technique for damage detection in composite laminates , 2009 .
[38] Victor Giurgiutiu,et al. Lamb wave generation with piezoelectric wafer active sensors for structural health monitoring , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[39] Roger Sauter,et al. Introduction to Probability and Statistics for Engineers and Scientists , 2005, Technometrics.