Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage: a review

[1]  Masahiko Fujikubo,et al.  Influence of boundary conditions on the collapse behaviour of stiffened panels under combined loads , 2013 .

[2]  P. B. R. Dissanayake,et al.  Numerical study on remaining strength prediction of corroded Steel bridge plates , 2013 .

[3]  S. Saad-Eldeen,et al.  Experimental assessment of corroded steel box-girders subjected to uniform bending , 2013 .

[4]  C. Guedes Soares,et al.  Assessment of characteristic values of the ultimate strength of corroded steel plates with initial imperfections , 2013 .

[5]  C. Soares,et al.  Ultimate strength assessment of rectangular steel plates subjected to a random localised corrosion degradation , 2013 .

[6]  C. Guedes Soares,et al.  Effect of corrosion severity on the ultimate strength of a steel box girder , 2013 .

[7]  C. Guedes Soares,et al.  Probabilistic modelling of the ultimate strength of ship plates with non-uniform corrosion , 2013 .

[8]  C. Guedes Soares,et al.  Ultimate strength assessment of corroded box girders , 2013 .

[9]  Ahmad Rahbar-Ranji,et al.  Ultimate strength of corroded steel plates with irregular surfaces under in-plane compression , 2012 .

[10]  Do Kyun Kim,et al.  Advanced method for the development of an empirical model to predict time-dependent corrosion wastage , 2012 .

[11]  C. Guedes Soares,et al.  A closed form formula to predict the ultimate capacity of pitted mild steel plate under biaxial compression , 2012 .

[12]  Rahbar-Ranji Ahmad.  Plastic collapse load of corroded steel plates , 2012 .

[13]  C. Soares,et al.  Influence of Model Geometry and Boundary Conditions on the Ultimate Strength of Stiffened Panels Under Uniaxial Compressive Loading , 2012 .

[14]  C. Soares,et al.  Ultimate capacity of rectangular plates with partial depth pits under uniaxial loads , 2012 .

[15]  M. Khedmati,et al.  A comparative computational investigation on the effects of randomly distributed general corrosion on the post-buckling behaviour of uniaxially loaded plates , 2012, Journal of Mechanical Science and Technology.

[16]  C. Soares,et al.  Corrosion-Dependent Ultimate Strength Assessment of Aged Box Girders Based on Experimental Results , 2011 .

[17]  Muhammad Rabiul Islam,et al.  Geometrical Effects of Pitting Corrosion on Strength and Deformability of Steel Rectangular Plates Subjected to Uniaxial Tension and Pure Bending , 2011 .

[18]  C. Guedes Soares,et al.  Experimental assessment of the ultimate strength of a box girder subjected to severe corrosion , 2011 .

[19]  C. Guedes Soares,et al.  Effect of environmental factors on steel plate corrosion under marine immersion conditions , 2011 .

[20]  S. Saad-Eldeen,et al.  Compressive strength assessment of a moderately corroded box girder , 2011 .

[21]  Mohammad Reza Khedmati,et al.  Strength of steel plates with both-sides randomly distributed with corrosion wastage under uniaxial compression , 2011 .

[22]  Yi Huang,et al.  Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression , 2010 .

[23]  Y. Garbatov,et al.  Corrosion of steels in marine environment, monitoring and standards , 2010 .

[24]  M. Khedmati,et al.  Degradation of the compressive strength of unstiffened/stiffened steel plates due to both-sides randomly distributed corrosion wastage , 2010 .

[25]  Jeom Kee Paik,et al.  Ship Structural Analysis and Design , 2010 .

[26]  Shingo Tamagawa,et al.  Effects of welding residual stress on compressive behavior and ultimate strength of corroded plate , 2010 .

[27]  Mobesher Ahmmad,et al.  Strength and deformability of corroded steel plates under quasi-static tensile load , 2010 .

[28]  C. Soares,et al.  Influence of environmental factors on corrosion of ship structures in marine atmosphere , 2009 .

[29]  Robert E. Melchers,et al.  Long-term corrosion of steels exposed to marine environments , 2009 .

[30]  S. Soares.  Effect of pitting corrosion on the collapse strength of rectangular plates under axial compression , 2009 .

[31]  Jeom Kee Paik,et al.  Condition assessment of aged structures , 2008 .

[32]  Robert E. Melchers,et al.  Operational based corrosion analysis in naval ships , 2008 .

[33]  Re Melchers,et al.  The critical involvement of anaerobic bacterial activity in modelling the corrosion behaviour of mild steel in marine environments , 2008 .

[34]  C. Soares,et al.  Corrosion wastage model for ship crude oil tanks , 2008 .

[35]  Anastassios N. Perakis,et al.  Time-varying ultimate strength of aging tanker deck plate considering corrosion effect , 2008 .

[36]  Robert E. Melchers,et al.  Extreme value statistics and long-term marine pitting corrosion of steel , 2008 .

[37]  C. Guedes Soares,et al.  Simulation of Inspections on Ship Plates With Random Corrosion Patterns , 2008 .

[38]  Wei-Cheng Cui,et al.  A Simplified Maximum Pit Depth Model of Mild and Low Alloy Steels in Marine Immersion Environments , 2008 .

[39]  Robert E. Melchers,et al.  Development of new applied models for steel corrosion in marine applications including shipping , 2008 .

[40]  Â. Teixeira,et al.  Ultimate strength of plates with random fields of corrosion , 2008 .

[41]  Jeom Kee Paik,et al.  Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: Part II stiffened panels , 2008 .

[42]  Carlos Guedes Soares,et al.  Random field of initial deflections and strength of thin rectangular plates , 2007, Reliab. Eng. Syst. Saf..

[43]  Yongchang Pu,et al.  Artificial neural networks and their application to assessment of ultimate strength of plates with pitting corrosion , 2007 .

[44]  A. Manevich.  Effect of strain hardening on the buckling of structural members and design codes recommendations , 2007 .

[45]  R. Melchers,et al.  The changing topography of corroding mild steel surfaces in seawater , 2007 .

[46]  C. Guedes Soares,et al.  Nonlinear Time Dependent Corrosion Wastage of Deck Plates of Ballast and Cargo Tanks of Tankers , 2007 .

[47]  Robert E. Melchers,et al.  Models for the anaerobic phases of marine immersion corrosion , 2006 .

[48]  A. Forsgren.  Corrosion Control Through Organic Coatings , 2006 .

[49]  Norio Yamamoto,et al.  Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bending , 2006 .

[50]  Robert E. Melchers,et al.  Statistical Characterization of Pitting Corrosion—Part 1: Data Analysis , 2005 .

[51]  Ge Wang,et al.  Assessment of Corrosion Risks to Aging Ships Using an Experience Database , 2005 .

[52]  Norio Yamamoto,et al.  Effect of pitting corrosion on local strength of hold frames of bulk carriers (2nd Report)—Lateral-distortional buckling and local face buckling , 2004 .

[53]  Robert E. Melchers,et al.  Pitting Corrosion of Mild Steel in Marine Immersion Environment—Part 1: Maximum Pit Depth , 2004 .

[54]  H. Arai,et al.  Effect of pitting corrosion on local strength of hold frames of bulk carriers (1st report) , 2004 .

[55]  Lei Jiang,et al.  A computational investigation of the effects of localized corrosion on plates and stiffened panels , 2004 .

[56]  J. Paik,et al.  Ultimate shear strength of plate elements with pit corrosion wastage , 2004 .

[57]  J. Paik,et al.  Ultimate compressive strength of plate elements with pit corrosion wastage , 2003 .

[58]  Robert E. Melchers,et al.  Corrosion analysis of bulk carriers, Part I: operational parameters influencing corrosion rates , 2003 .

[59]  Jae-Myung Lee,et al.  Time-variant ultimate longitudinal strength of corroded bulk carriers , 2003 .

[60]  Robert E. Melchers,et al.  Probabilistic Models for Corrosion in Structural Reliability Assessment—Part 2: Models Based on Mechanics , 2003 .

[61]  Robert E. Melchers,et al.  Effect on marine immersion corrosion of carbon content of low alloy steels , 2003 .

[62]  Robert E. Melchers,et al.  Mathematical modelling of the diffusion controlled phase in marine immersion corrosion of mild steel , 2003 .

[63]  Jeom Kee Paik,et al.  Ultimate limit state design of steel-plated structures , 2003 .

[64]  Robert E. Melchers,et al.  Corrosion of mild steel by coal and iron ore , 2002 .

[65]  W-C Cui,et al.  A discussion of the ultimate strength of ageing ships, with particular reference to the corrosion model , 2002 .

[66]  J K Paik,et al.  Ultimate strength of ageing ships , 2002 .

[67]  R. Melchers.  Corrosion uncertainty modelling for steel structures , 1999 .

[68]  C. Guedes Soares,et al.  Reliability of maintained, corrosion protected plates subjected to non-linear corrosion and compressive loads , 1999 .

[69]  Jeom Kee Paik,et al.  Probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers , 1998 .

[70]  Norio Yamamoto,et al.  A Study on the Degradation of Coating and Corrosion of Ship’s Hull Based on the Probabilistic Approach , 1998 .

[71]  I. Young,et al.  Observations of the spectra of hurricane generated waves , 1998 .

[72]  C. Guedes Soares,et al.  Reliability of maintained ship hulls subjected to corrosion and fatigue under combined loading , 1996 .

[73]  A. D. Mercer,et al.  Corrosion of mild steel in water , 1995 .

[74]  A. Kiureghian,et al.  OPTIMAL DISCRETIZATION OF RANDOM FIELDS , 1993 .

[75]  Masahiro Ohyagi,et al.  Statistical Survey on Wear of Ship's Structural Members , 1987 .

[76]  Pang-jo Chun,et al.  ESTIMATION OF CORROSION-INDUCED STRENGTH DETERIORATION OF STEEL BRIDGE PLATES - AN ANALYTICAL METHOD , 2011 .

[77]  Jiang Xiao-li,et al.  Nonlinear FEM Analysis of Pitted Mild Steel Square Plate Subjected to In-plane Compression , 2009 .

[78]  C. Guedes Soares,et al.  Corrosion wastage modeling of deteriorated bulk carrier decks , 2008 .

[79]  Yongchang Pu,et al.  Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression , 2007 .

[80]  T. Nakai,et al.  PITTING CORROSION ON EPOXY-COATED SURFACE OF SHIP STRUCTURES , 2007 .

[81]  Norio Yamamoto,et al.  Effect of pitting corrosion on strength of web plates subjected to patch loading , 2006 .

[82]  Ge Wang,et al.  Non-linear Corrosion Model for Immersed Steel Plates Accounting for Environmental Factors , 2005 .

[83]  C. Guedes Soares,et al.  Degradation of the compressive strength of rectangular plates due to initial deflection , 2005 .

[84]  Ge Wang,et al.  PROBABILISTIC EVALUATION OF HULL STRUCTURE RENEWALS FOR AGING SHIPS , 2003 .

[85]  Weicheng Cui,et al.  Effect of corrosion models on the time-dependent reliability of steel plated elements , 2003 .

[86]  Jae-Myung Lee,et al.  Time-dependent risk assessment of aging ships accounting for general / pit corrosion, fatigue cracking and local denting damage. Discussion , 2003 .

[87]  C. Guedes Soares,et al.  Compressive strength of rectangular plates under biaxial load and lateral pressure , 1996 .

[88]  John Chamberlain,et al.  Corrosion for science and engineering , 1995 .

[89]  Robert Løseth,et al.  ECONOMICS OF HIGH-TENSILE STEEL IN SHIP HULLS , 1994 .

[90]  J. C. Chapman,et al.  STRENGTH AND STIFFNESS OF SHIPS' PLATING UNDER IN-PLANE COMPRESSION AND TENSION , 1987 .

[91]  R. J. Crawford,et al.  Mechanics of engineering materials , 1986 .

[92]  Y. Ueda,et al.  The influence of complex initial deflection modes on the behaviour and ultimate strength of rectangular plates in compression , 1985 .