Recursive Estimation-Based Maximum Power Extraction Technique for a Fuel Cell Power Source Used in Vehicular Applications

Extraction of maximum power from a fuel cell (FC) power source (PS) is essential for its optimum and economical utilization. However, the maximum extractable power from an FCPS varies dynamically during the fuel cell operation for varying load current requirements as the system parameters are also changing. One such example is the use of an FCPS in vehicular applications, where the power requirement varies dynamically during the drive cycle. This makes maximum power extraction a challenging task. As the load varies, the equivalent resistance appearing across the FC varies too. The maximum power point (MPP) appears prominently on the power versus curve. This paper presents a novel MPP tracking (MPPT) scheme using nonlinear curve fitting and recursive least-squares estimation (RLSE). A current controlled Cuk converter is used due to its low ripple feature. RLSE determines the MPP online, which is used as a reference for the control of the Cuk converter. The performance of this MPPT scheme for a typical vehicular drive cycle is compared with the popular “Perturb and Observe” and Incremental conductance methods. All the analytical and simulation results are included. Experimental results are also presented to validate the proposed scheme for the drive cycle load profile.

[1]  Rong-Jong Wai,et al.  High step-up converter with coupled-inductor , 2005 .

[2]  Jacob Benesty,et al.  A Robust Variable Forgetting Factor Recursive Least-Squares Algorithm for System Identification , 2008, IEEE Signal Processing Letters.

[3]  Judith O'Rourke,et al.  Real-time optimization of net power in a fuel cell system , 2009 .

[4]  Yuan Ren,et al.  Adaptive maximum power point tracking control of fuel cell power plants , 2008 .

[5]  Saied Taheri,et al.  Application of Recursive Least Square Algorithm on Estimation of Vehicle Sideslip Angle and Road Friction , 2010 .

[6]  S. Rael,et al.  Mathematical model and characterization of the transient behavior of a PEM fuel cell , 2004, IEEE Transactions on Power Electronics.

[7]  Douglas J. Nelson,et al.  Fuel cell systems: efficient, flexible energy conversion for the 21st century , 2001, Proc. IEEE.

[8]  Anna G. Stefanopoulou,et al.  Recursive least squares with forgetting for online estimation of vehicle mass and road grade: theory and experiments , 2005 .

[9]  Saad Mekhilef,et al.  Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter , 2011, IEEE Transactions on Industrial Electronics.

[10]  Bo-Hyung Cho,et al.  Maximum Efficiency Point Tracking Algorithm Using Oxygen Access Ratio Control for Fuel Cell Systems , 2011 .

[11]  Chi K. Tse,et al.  Development of a maximum-power-point tracking algorithm for direct methanol fuel cell and its realization in a fuel cell/supercapacitor hybrid energy system , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[12]  James Larminie,et al.  Fuel Cell Systems Explained: Larminie/Fuel Cell Systems Explained , 2003 .

[13]  Jiann-Fuh Chen,et al.  Multicascoded Sources for a High-Efficiency Fuel-Cell Hybrid Power System in High-Voltage Application , 2011, IEEE Transactions on Power Electronics.

[14]  Kannan Govindan,et al.  Analysis and comparative study of pulsating current of fuel cells by inverter load with different po , 2011 .

[15]  V. Agarwal,et al.  Dynamic power control and performance analysis of Phosphoric Acid Fuel Cell - Battery hybrid system , 2012, 2012 International Conference on Advances in Power Conversion and Energy Technologies (APCET).

[16]  Radojka Krneta,et al.  Recursive least squares method in parameters identification of DC motors models , 2005 .

[17]  M. Farooque,et al.  Fuel cells-the clean and efficient power generators , 2001, Proc. IEEE.

[18]  Ahmad Zahedi,et al.  Maximum efficiency point tracking control for fuel cell power systems , 2010, 2010 International Conference on Power System Technology.

[19]  P.L. Chapman,et al.  Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques , 2007, IEEE Transactions on Energy Conversion.

[20]  I. Batarseh,et al.  DSP-based multiple peak power tracking for expandable power system , 2003, Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03..

[21]  Sewan Choi,et al.  A three-phase current-fed push-pull DC-DC converter with active clamp for fuel cell applications , 2011, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[22]  Weidong Xiao,et al.  Real-Time Identification of Optimal Operating Points in Photovoltaic Power Systems , 2006, IEEE Transactions on Industrial Electronics.

[23]  Massimo Vitelli,et al.  Low-Frequency Current Oscillations and Maximum Power Point Tracking in Grid-Connected Fuel-Cell-Based Systems , 2010, IEEE Transactions on Industrial Electronics.

[24]  Xinbo Ruan,et al.  Power Management for Fuel-Cell Power System Cold Start , 2009, IEEE Transactions on Power Electronics.

[25]  M. C. Williams.  Fuel cells and the world energy future , 2001, 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262).

[26]  A. Khaligh,et al.  Power electronics intensive solutions for advanced electric, hybrid electric, and fuel cell vehicular power systems , 2006, IEEE Transactions on Power Electronics.

[27]  Mohammad Rezanejad,et al.  Maximum power point tracking for fuel cell in fuel cell/battery hybrid systems , 2008 .

[28]  Dong-Choon Lee,et al.  Online capacitance estimation of DC-link electrolytic capacitors for three-phase AC/DC/AC PWM converters using recursive least squares method , 2005 .