Study on Li de-intercalation/intercalation mechanism for a high capacity layered Li1.20Ni0.17Co0.10Mn0.53O2 material

[1]  Yuichi Sato,et al.  In situ X-ray absorption spectroscopic study of Li-rich layered cathode material Li[Ni0.17Li0.2Co0.07Mn0.56]O2 , 2011 .

[2]  Yoshiyasu Saito,et al.  X-ray absorption near-edge structure study on positive electrodes of degraded lithium-ion battery , 2011 .

[3]  Yuichi Sato,et al.  Direct observation of the partial formation of a framework structure for Li-rich layered cathode mat , 2011 .

[4]  Shinichi Komaba,et al.  Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo(1/3)Ni(1/3)Mn(1/3)O2. , 2011, Journal of the American Chemical Society.

[5]  Manabu Watanabe,et al.  Cyclic deterioration and its improvement for Li-rich layered cathode material Li[Ni0.17Li0.2Co0.07Mn0.56]O2 , 2010 .

[6]  Soft X-ray characterization technique for Li batteries under operating conditions. , 2009, Journal of synchrotron radiation.

[7]  H. Sakaebe,et al.  Bulk and surface structure investigation for the positive electrodes of degraded lithium-ion cell after storage test using X-ray absorption near-edge structure measurement , 2009 .

[8]  A. Manthiram,et al.  Effect of surface modifications on the layered solid solution cathodes (1 − z) Li[Li1/3Mn2/3]O2 − (z) Li[Mn0.5 − yNi0.5 − yCo2y]O2 , 2009 .

[9]  De-cheng Li,et al.  A new approach to improve the high-voltage cyclic performance of Li-rich layered cathode material by electrochemical pre-treatment , 2008 .

[10]  Hironori Kobayashi,et al.  Investigation of positive electrodes after cycle testing of high-power Li-ion battery cells: I. An approach to the power fading mechanism using XANES , 2007 .

[11]  K. Tatsumi,et al.  Investigation of inorganic compounds on the surface of cathode materials using Li and O K-edge XANES , 2007 .

[12]  F. Izumi,et al.  Three-Dimensional Visualization in Powder Diffraction , 2007 .

[13]  H. Kageyama,et al.  Investigation on lithium de-intercalation mechanism for Li1−yNi1/3Mn1/3Co1/3O2 , 2005 .

[14]  H. Sakaebe,et al.  Li de-intercalation mechanism in LiNi0.5Mn0.5O2 cathode material for Li-ion batteries , 2005 .

[15]  H. Kageyama,et al.  Structural determination of Li1−yNi0.5Mn0.5O2(y= 0.5) using a combination of Rietveld analysis and the maximum entropy method , 2004 .

[16]  H. Sakaebe,et al.  Changes in the structure and physical properties of Li1−yNi0.5Mn0.4Ti0.1O2 (y=0 and 0.5) , 2004 .

[17]  John T. Vaughey,et al.  The significance of the Li2MnO3 component in ‘composite’ xLi2MnO3 · (1 − x)LiMn0.5Ni0.5O2 electrodes , 2004 .

[18]  Hiroyuki Kageyama,et al.  Changes in the structure and physical properties of the solid solution LiNi1−xMnxO2 with variation in its composition , 2003 .

[19]  S. Emura,et al.  Structural Change of Li1−xNi0.5Mn0.5O2 Cathode Materials for Lithium-ion Batteries by Synchrotron Radiation , 2003 .