A novel 1D/2D model for simulating conjugate heat transfer applied to flow boiling in tubes with external fins

This study presents a novel, simplified model for the time-efficient simulation of transient conjugate heat transfer in round tubes. The flow domain and the tube wall are modeled in 1D and 2D, respectively and empirical correlations are used to model the flow domain in 1D. The model is particularly useful when dealing with complex physics, such as flow boiling, which is the main focus of this study. The tube wall is assumed to have external fins. The flow is vertical upwards. Note that straightforward computational fluid dynamics (CFD) analysis of conjugate heat transfer in a system of tubes, leads to 3D modeling of fluid and solid domains. Because correlation is used and dimensionality reduced, the model is numerically more stable and computationally more time-efficient compared to the CFD approach. The benefit of the proposed approach is that it can be applied to large systems of tubes as encountered in many practical applications. The modeled equations are discretized in space using the finite volume method, with central differencing for the heat conduction equation in the solid domain, and upwind differencing of the convective term of the enthalpy transport equation in the flow domain. An explicit time discretization with forward differencing was applied to the enthalpy transport equation in the fluid domain. The conduction equation in the solid domain was time discretized using the Crank–Nicholson scheme. The model is applied in different boundary conditions and the predicted boiling patterns and temperature fields are discussed.

[1]  Ali Cemal Benim,et al.  Numerical study on the effect of inner tube fouling on the thermal performance of high-temperature fin-and-tube heat exchanger , 2015 .

[2]  S. Rouhani,et al.  CALCULATION OF VOID VOLUME FRACTION IN THE SUBCOOLED AND QUALITY BOILING REGIONS , 1970 .

[3]  Paweł Ocłoń,et al.  Simplified numerical study of evaporation processes inside vertical tubes , 2014 .

[4]  J. Anderson,et al.  Computational fluid dynamics : the basics with applications , 1995 .

[5]  Paweł Ocłoń,et al.  Investigation of the flow conditions in a high-performance heat exchanger , 2010 .

[6]  L. Jia,et al.  Evaporating momentum force and shear force on meniscuses of elongated bubble in microchannel flow boiling , 2014 .

[7]  J. Taborek,et al.  Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymptotic Model , 1992 .

[8]  K. Yan,et al.  Experimental study on near wall transport characteristics of slug flow in a vertical pipe , 2012 .

[9]  P. Ocłoń,et al.  Comparative study of conjugate gradient algorithms performance on the example of steady-state axisymmetric heat transfer problem , 2013 .

[10]  Gherhardt Ribatski,et al.  Modeling and experimental study of nucleate boiling on a vertical array of horizontal plain tubes , 2008 .

[11]  Tassos G. Karayiannis,et al.  Confined bubble growth during flow boiling in a mini-/micro-channel of rectangular cross-section part II: Approximate 3-D numerical simulation , 2011 .

[12]  P. Ocłoń,et al.  Modelling and Optimizing Operating Conditions of Heat Exchanger with Finned Elliptical Tubes , 2012 .

[13]  Hiroshi Osada,et al.  Dynamic modeling on bubble growth, detachment and heat transfer for hybrid-scheme computations of nucleate boiling , 2013 .

[14]  F. Hormozi,et al.  Sedimentation and convective boiling heat transfer of CuO-water/ethylene glycol nanofluids , 2014 .

[15]  R. P. Reddy,et al.  Investigations on heat transfer enhancement in pool boiling with water-CuO nano-fluids , 2012 .

[16]  J. Thome,et al.  Local Bundle Boiling Heat Transfer Coefficients on an Integral Finned Tube Bundle (RP-1089) , 2004 .

[17]  J. Thome,et al.  Boiling on a Tube Bundle: Part II—Heat Transfer and Pressure Drop , 2012 .

[18]  J. Thome,et al.  Prediction of Local Bundle Boiling Heat Transfer Coefficients: Pure Refrigerant Boiling on Plain, Low Fin, and Turbo-BII HP Tube Bundles , 2006 .

[19]  R. Webb,et al.  A nucleate boiling model for structured enhanced surfaces , 1998 .

[20]  R. Mehdipour,et al.  Numerical simulation of annular two-phase flow considering the four involved mass transfers , 2013 .

[21]  S. Narumanchi,et al.  Numerical simulations of nucleate boiling in impinging jets: Applications in power electronics cooling , 2008 .

[22]  J. Thome.  Enhanced Boiling Heat Transfer , 1990 .

[23]  J. Taler,et al.  Solving Direct and Inverse Heat Conduction Problems , 2006 .

[24]  John R. Thome,et al.  Numerical investigation of hydrodynamics and heat transfer of elongated bubbles during flow boiling in a microchannel , 2013 .

[25]  Wiesław Zima,et al.  Simulation of transient processes in heating surfaces of power boilers , 2013 .

[26]  Weibin Ma,et al.  Numerical study of heat and mass transfer of ammonia-water in falling film evaporator , 2012 .

[27]  John R. Thome,et al.  Numerical investigation of the influence of leading and sequential bubbles on slug flow boiling within a microchannel , 2013 .

[28]  Vineeth K Kumar,et al.  Nucleate pool boiling heat transfer over a bundle of vertical tubes , 2010 .

[29]  L. Friedel.  Improved Friction Pressure Drop Correlation for Horizontal and Vertical Two-Phase Pipe Flow , 1979 .

[30]  Qiuwan Wang,et al.  Numerical simulation and comparison of turbulent heat transfer in supercritical and subcritical water , 2013 .

[31]  Shalendra Kumar,et al.  Boiling heat transfer from a vertical row of horizontal tubes , 2002 .

[32]  S. Kakaç,et al.  Analysis of convective two-phase flow instabilities in vertical and horizontal in-tube boiling systems , 2009 .

[33]  B. M. Burnside,et al.  HEAT TRANSFER IN FLOW BOILING OVER A BUNDLE OF HORIZONTAL TUBES , 2005 .

[34]  John R. Thome,et al.  Two-Phase Flow and Heat Transfer across Horizontal Tube Bundles‐A Review , 2007 .

[35]  Paulo R. M. Lyra,et al.  An axisymmetric finite volume formulation for the solution of heat conduction problems using unstructured meshes , 2005 .

[36]  Li Wang,et al.  The effect of evaporator operating parameters on the flow patterns inside horizontal pipes , 2011 .

[37]  X. Huai,et al.  Simulation of heat transfer with the growth and collapse of a cavitation bubble near the heated wall , 2013 .

[38]  Jeet S. Mehta,et al.  Pool boiling heat transfer enhancement over cylindrical tubes with water at atmospheric pressure, Part I: Experimental results for circumferential rectangular open microchannels , 2013 .

[39]  V. V. Yagov,et al.  Nucleate boiling heat transfer: possibilities and limitations of theoretical analysis , 2009 .

[40]  B. Oesterlé,et al.  Numerical simulation of subcooled boiling in a turbulent channel flow , 2006 .

[41]  Paweł Ocłoń,et al.  Analysis of operating conditions for high performance heat exchanger with the finned elliptical tube , 2012 .

[42]  M. Piasecka.  An application of enhanced heating surface with mini-reentrant cavities for flow boiling research in minichannels , 2013 .

[43]  H. Xue,et al.  Particulate fouling during the pool boiling heat transfer of MWCNT nanofluid , 2012 .

[44]  Barbara Watel,et al.  Review of saturated flow boiling in small passages of compact heat-exchangers , 2003 .

[45]  A. Pishevar,et al.  A numerical investigation of droplet impact on a heated wall in the film boiling regime , 2012 .

[46]  A. Swain,et al.  A review on saturated boiling of liquids on tube bundles , 2014 .

[47]  T. J. Chung,et al.  Computational Fluid Dynamics: Contents , 2010 .

[48]  Y. Qiu,et al.  Boiling heat transfer enhancement of water on tubes in compact in-line bundles , 2006 .

[49]  Yong Tang,et al.  Heat transfer mechanism of miniature loop heat pipe with water-copper nanofluid: thermodynamics model and experimental study , 2013 .

[50]  L. Jia,et al.  An experimental investigation on the confined and elongated bubbles in subcooled flow boiling in a single microchannel , 2012 .

[51]  J. Thome,et al.  Saturated flow boiling heat transfer and critical heat flux in small horizontal flattened tubes , 2012 .

[52]  Li Jia,et al.  An experimental investigation on heat transfer performance of nanofluid pulsating heat pipe , 2013 .

[53]  Seungyeob Ryu,et al.  Direct numerical simulation of nucleate pool boiling using a two-dimensional lattice Boltzmann method , 2012 .