Numerical simulation of the effects of structure size ratio and mesh type on three-dimensional deformation of the fishing-net gravity cage in current

In our previous research, the hydrodynamic behavior of a two-dimensional (2D) plane fishing net in current was simulated. Based on the research, a model of a three-dimensional (3D) net is established by using the lumped mass method. To verify the validity of the numerical model, model test results by other authors are cited and compared with the numerical results. The simulated results are in good agreement with experimental ones. In this paper, the 3D net model is applied to investigate the effects of structure size ratio (RDH) and mesh type on the 3D net deformation of the gravity cage in current. The numerical results indicate that the decrease of RDH is practically feasible in improving the cage net deformation. With a sinker system the net deformation with diamond mesh is greater than that with square mesh. When the bottom-collar sinker system is applied, with an increase in current velocity, the net deformation with diamond mesh is less than with square mesh. The results of this study provide a better understanding of the hydrodynamic behavior of the gravity cage.

[1]  Fuxiang Hu,et al.  A static analysis of the tension and configuration of submerged plane nets , 2002 .

[2]  Basil W. Wilson.  Elastic Characteristics of Mooring , 1967 .

[3]  David W. Fredriksson,et al.  Finite element modeling of net panels using a consistent net element , 2003 .

[4]  Mario J. Casarella,et al.  HYDRODYNAMIC RESISTANCE OF TOWED CABLES , 1971 .

[5]  D. B. Colbourne,et al.  Observations on motions and loads in aquaculture cages from full scale and model scale measurements , 2001 .

[6]  J. Wittenburg,et al.  Dynamics of systems of rigid bodies , 1977 .

[7]  J. V. Aarsnes,et al.  Current forces on cage, net deflection , 1990 .

[8]  Bin Teng,et al.  Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current , 2006 .

[9]  P. Lader,et al.  Experimental investigation of forces and geometry of a net cage in uniform flow , 2005, IEEE Journal of Oceanic Engineering.

[10]  Dong,et al.  Numerical simulation of the influences of sinker weight on the deformation and load of net of gravity sea cage in uniform flow , 2006 .

[11]  Gui Fukun.  THE INFLUENCE OF SINKER FORMS AND WEIGHT ON MOORING LINE FORCE OF GRAVITY SEA-CAGE , 2006 .

[12]  A. L. Fridman,et al.  Calculations for Fishing Gear Designs , 1987 .

[13]  Geir Løland.  Current forces on and flow through fish farms , 1991 .

[14]  D. Marichal,et al.  Study of the dynamics of submerged supple nets (applications to trawls) , 1998 .

[15]  Jin-Yuan Liu,et al.  Dynamical analysis of net cage structures for marine aquaculture: Numerical simulation and model testing , 2006 .

[16]  Gerhard Klust.  Fibre Ropes for Fishing Gear , 1991 .