The performance and microstructure of alkali-activated artificial aggregates prepared from municipal solid waste incineration bottom ash

[1]  Weizhuo Zhang,et al.  Research on the durability and Sustainability of an artificial lightweight aggregate concrete made from municipal solid waste incinerator bottom ash (MSWIBA) , 2023, Construction and Building Materials.

[2]  Weizhuo Zhang,et al.  Exploring the carbon capture and sequestration performance of biochar-artificial aggregate using a new method. , 2022, The Science of the total environment.

[3]  B. Dong,et al.  Fly ash-based artificial aggregates synthesized through alkali-activated cold-bonded pelletization technology , 2022, Construction and Building Materials.

[4]  Weizhuo Zhang,et al.  Valorization of municipal solid waste incineration bottom ash (MSWIBA) into cold-bonded aggregates (CBAs): Feasibility and influence of curing methods. , 2022, Science of the Total Environment.

[5]  N. Themelis,et al.  Performance of Waste-to-Energy fine combined ash/filter cake ash-metakaolin based artificial aggregate , 2022, Construction and Building Materials.

[6]  D. Yan,et al.  Pore structure of geopolymer materials and its correlations to engineering properties: A review , 2022, Construction and Building Materials.

[7]  G. de Schutter,et al.  A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials , 2022, Construction and Building Materials.

[8]  Can Wang,et al.  Evaluating the use of BECCS and afforestation under China’s carbon-neutral target for 2060 , 2021 .

[9]  J. Dai,et al.  Development of artificial one-part geopolymer lightweight aggregates by crushing technique , 2021 .

[10]  Zaid Ghouleh,et al.  Green concrete made from MSWI residues derived eco-cement and bottom ash aggregates , 2021 .

[11]  Shaoyun Pu,et al.  Effect of synthesis parameters on the development of unconfined compressive strength of recycled waste concrete powder-based geopolymers , 2021, Construction and Building Materials.

[12]  T. Ling,et al.  Roles of chlorine and sulphate in MSWIFA in GGBFS binder: Hydration, mechanical properties and stabilization considerations. , 2021, Environmental pollution.

[13]  Y. Hama,et al.  Physical and Chemical Relationships in Accelerated Carbonation Conditions of Alkali-Activated Cement Based on Type of Binder and Alkali Activator , 2021, Polymers.

[14]  G. Ma,et al.  Approaches to enhance the carbonation resistance of fly ash and slag based alkali-activated mortar- experimental evaluations , 2021 .

[15]  N. Belie,et al.  The effect of NaOH concentration on the mechanical and physical properties of alkali activated fly ash-based artificial lightweight aggregate , 2020 .

[16]  J. de Brito,et al.  Incorporation of Alkali-Activated Municipal Solid Waste Incinerator Bottom Ash in Mortar and Concrete: A Critical Review , 2020, Materials.

[17]  L. Tang,et al.  Utilisation of municipal solid waste incinerator (MSWI) fly ash with metakaolin for preparation of alkali-activated cementitious material. , 2020, Journal of hazardous materials.

[18]  Francesco Colangelo,et al.  Cold-bonding process for treatment and reuse of waste materials: Technical designs and applications of pelletized products , 2020 .

[19]  N. De Belie,et al.  Properties of Alkali Activated Lightweight Aggregate Generated from Sidoarjo Volcanic Mud (Lusi), Fly Ash, and Municipal Solid Waste Incineration Bottom Ash , 2020, Materials.

[20]  M. Hussain,et al.  Physico-mechanical performance and durability of artificial lightweight aggregates synthesized by cementing and geopolymerization , 2020 .

[21]  Xiaojian Gao,et al.  Effect of carbonation curing regime on strength and microstructure of Portland cement paste , 2019 .

[22]  F. Donato,et al.  Cement plant emissions and health effects in the general population: a systematic review. , 2019, Chemosphere.

[23]  Xunhua Zheng,et al.  Net ecosystem carbon and greenhouse gas budgets in fiber and cereal cropping systems. , 2019, The Science of the total environment.

[24]  Roya Maboudian,et al.  The chemistry and structure of calcium (alumino) silicate hydrate: A study by XANES, ptychographic imaging, and wide- and small-angle scattering , 2019, Cement and Concrete Research.

[25]  C. Poon,et al.  Limitations and quality upgrading techniques for utilization of MSW incineration bottom ash in engineering applications – A review , 2018, Construction and Building Materials.

[26]  Yongsheng Ji,et al.  The influence of curing methods on the strength of MSWI bottom ash-based alkali-activated mortars: The role of leaching of OH− and free alkali , 2018, Construction and Building Materials.

[27]  Duo Zhang,et al.  Surface scaling of CO2-cured concrete exposed to freeze-thaw cycles , 2018, Journal of CO2 Utilization.

[28]  Chen Hongyu,et al.  Preparation and characterization of coal gangue geopolymers , 2018, Construction and Building Materials.

[29]  Yongsheng Ji,et al.  Improving strength of calcinated coal gangue geopolymer mortars via increasing calcium content , 2018 .

[30]  Yongsheng Ji,et al.  Use of slaked lime and Portland cement to improve the resistance of MSWI bottom ash-GBFS geopolymer concrete against carbonation , 2018 .

[31]  K. Arbi,et al.  Carbonation Resistance of Alkali-Activated Slag Under Natural and Accelerated Conditions , 2018, Journal of Sustainable Metallurgy.

[32]  Dongwei Li,et al.  Enhancement Experiment on Cementitious Activity of Copper-Mine Tailings in a Geopolymer System , 2017 .

[33]  C. Shi,et al.  Durability of alkali-activated materials in aggressive environments: A review on recent studies , 2017 .

[34]  J. M. Chimenos,et al.  Geopolymers based on the valorization of Municipal Solid Waste Incineration residues , 2017 .

[35]  Majid Rostami,et al.  An assessment on parameters affecting the carbonation of alkali-activated slag concrete , 2017 .

[36]  F. Khalili,et al.  Efficiency and mechanism of stabilization/solidification of Pb(II), Cd(II), Cu(II), Th(IV) and U(VI) in metakaolin based geopolymers , 2017 .

[37]  H. Brouwers,et al.  Integral recycling of municipal solid waste incineration (MSWI) bottom ash fines (0-2mm) and industrial powder wastes by cold-bonding pelletization. , 2017, Waste management.

[38]  B. Lothenbach,et al.  Friedel's salt profiles from thermogravimetric analysis and thermodynamic modelling of Portland cement-based mortars exposed to sodium chloride solution , 2017 .

[39]  Arnaud Castel,et al.  Carbonation of a blended slag-fly ash geopolymer concrete in field conditions after 8 years , 2016 .

[40]  Ye Sun,et al.  Resistance of metakaolin-MSWI fly ash based geopolymer to acid and alkaline environments , 2016 .

[41]  William D. Burgos,et al.  Effect of calcium on dissolution and precipitation reactions of amorphous silica at high alkalinity , 2016 .

[42]  H. Brouwers,et al.  High performance of treated and washed MSWI bottom ash granulates as natural aggregate replacement within earth-moist concrete. , 2016, Waste management.

[43]  Loai Aljerf.  Effect of Thermal-cured Hydraulic Cement Admixtures on the Mechanical Properties of Concrete , 2015, Interceram - International Ceramic Review.

[44]  Yu-min Chang,et al.  Effect of solid-to-liquid ratios on the properties of waste catalyst-metakaolin based geopolymers , 2015 .

[45]  Jingliang Dong,et al.  Study on the strength development, hydration process and carbonation process of NaOH-activated Pisha Sandstone , 2014 .

[46]  S. Bernal,et al.  Geopolymers and Related Alkali-Activated Materials , 2014 .

[47]  Erez N. Allouche,et al.  Corrosion of steel bars induced by accelerated carbonation in low and high calcium fly ash geopolymer concretes , 2014 .

[48]  Shigemitsu Hatanaka,et al.  The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured , 2014 .

[49]  Adam R. Kilcullen,et al.  Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated , 2013 .

[50]  K. Ramamurthy,et al.  Properties of geopolymerised low-calcium bottom ash aggregate cured at ambient temperature , 2013 .

[51]  N. Yamaguchi,et al.  Preparation of monolithic geopolymer materials from urban waste incineration slags , 2013 .

[52]  J. Brito,et al.  An overview on concrete carbonation in the context of eco-efficient construction: Evaluation, use of SCMs and/or RAC , 2012 .

[53]  Y. M. Liew,et al.  Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers , 2012 .

[54]  John L. Provis,et al.  Accelerated carbonation testing of alkali-activated binders significantly underestimates service lif , 2012 .

[55]  Rupert J. Myers,et al.  X-ray microtomography shows pore structure and tortuosity in alkali-activated binders , 2012 .

[56]  J. Ideker,et al.  Advances in alternative cementitious binders , 2011 .

[57]  Á. Palomo,et al.  Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O , 2011 .

[58]  Hugo Marcelo Veit,et al.  The effects of Na2O/SiO2 molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers , 2011 .

[59]  H. Lee,et al.  Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete , 2011 .

[60]  John L. Provis,et al.  Pore solution composition and alkali diffusion in inorganic polymer cement , 2010 .

[61]  Longtu Li,et al.  A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements , 2010 .

[62]  Samiran Mahapatra,et al.  Synthesis of All Crystalline Phases of Anhydrous Calcium Carbonate , 2010 .

[63]  Prinya Chindaprasirt,et al.  Influence of NaOH solution on the synthesis of fly ash geopolymer , 2009 .

[64]  D. Bentz.  Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars , 2009 .

[65]  John L. Provis,et al.  Carbonate mineral addition to metakaolin-based geopolymers , 2008 .

[66]  J. Deventer,et al.  The Role of Inorganic Polymer Technology in the Development of ‘Green Concrete’ , 2007 .

[67]  Jong-Bin Park,et al.  Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA) , 2007 .

[68]  Hamlin M. Jennings,et al.  Decalcification shrinkage of cement paste , 2006 .

[69]  T. Bakharev,et al.  Durability of Geopolymer Materials in Sodium and Magnesium Sulfate Solutions , 2005 .

[70]  J. Deventer,et al.  Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results , 2005 .

[71]  J. Deventer,et al.  The geopolymerisation of alumino-silicate minerals , 2000 .

[72]  M. Nogami,et al.  Preparation of cordierite glass by the sol-gel process , 1989 .

[73]  J. Bijen.  Manufacturing processes of artificial lightweight aggregates from fly ash , 1986 .

[74]  B. Dodge,et al.  Rate of Absorption of Carbon Dioxide in Water and in Alkaline Media , 1932 .

[75]  Z. Man,et al.  Concentration of NaOH and the Effect on the Properties of Fly Ash Based Geopolymer , 2016 .

[76]  C. Hall,et al.  The mineralogy of the CaO–Al2O3–SiO2–H2O (CASH) hydroceramic system from 200 to 350 °C , 2009 .