Physical and structural properties of ZnO sputtered films

Abstract In this paper, poly-crystal zinc oxide (ZnO) films with c -axis (002) orientation have been successfully grown on the silicon substrate by r.f. magnetron sputtering technique. The deposited films were characterized as a function of deposition temperature, argon–oxygen gas flow ratio, and r.f. power. Crystalline structures, stress and roughness characteristics of the films were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurement. By controlling deposition parameters and annealing temperature, we could improve intrinsic stress and surface roughness of ZnO film. Preferred deposition condition was found to show good film quality for SAW device applications.

[1]  Qian Zenxing,et al.  A Modified ZnO Film Model for Calculating Elastic and Piezoelectric Properties , 1985 .

[2]  Jun Koike,et al.  1.5 GHz Low-Loss Surface Acoustic Wave Filter Using ZnO/Sapphire Substrate , 1993 .

[3]  K. Wasa,et al.  ZnO Thin-Film SAW Devices , 1980, IEEE Transactions on Sonics and Ultrasonics.

[4]  M. Kadota,et al.  Influence of step-like portions on the surface of ZnO/glass SAW filters on their frequency characteristics , 1997, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  Kalpathy B. Sundaram,et al.  Characterization and optimization of zinc oxide films by r.f. magnetron sputtering , 1997 .

[6]  D. W. Hoffman,et al.  Stress-related effects in thin films , 1989 .

[7]  K. Sugiyama,et al.  Preparation of orientated aluminium nitride films by radio-frequency reactive sputtering , 1990 .

[8]  S. Maniv,et al.  Controlled texture of reactively rf‐sputtered ZnO thin films , 1978 .

[9]  W. Tsai,et al.  Growth of ZnO thin films on interdigital transducer/Corning 7059 glass substrates by two-step fabrication methods for surface acoustic wave applications , 1998 .

[10]  Modeeparampil N. Kamalasanan,et al.  Sol-gel synthesis of ZnO thin films , 1996 .

[11]  M. Miki-Yoshida,et al.  Growth, structure and optical characterization of high quality ZnO thin films obtained by spray pyrolysis , 1999 .

[12]  C. Aita,et al.  Postdeposition annealing behavior of rf sputtered ZnO films , 1980 .

[13]  Vinay Gupta,et al.  Influence of postdeposition annealing on the structural and optical properties of sputtered zinc oxide film , 1996 .

[14]  Min Han,et al.  Substrate dependent internal stress in sputtered zinc oxide thin films , 1992 .

[15]  Tatsuya Shoji,et al.  ZnO Film Growth on (0112)LiTaO3 by Electron Cyclotron Resonance-Assisted Molecular Beam Epitaxy and Determination of Its Polarity , 2000 .

[16]  Shinzo Takata,et al.  Transparent and Conductive ZnO Thin Films Prepared by Atmospheric-Pressure Chemical Vapor Deposition Using Zinc Acetylacetonate , 1994 .