On the Performance of Thin-Walled Crash Boxes Joined by Forming

A new joining by forming process that combines lancing and shearing with sheet-bulk compression is utilized to assemble thin-walled crash boxes utilized as energy absorbers. Process design and fabrication of the new crash boxes are analyzed by finite elements and experimentation. Axial crush tests were performed to compare the overall crashworthiness performance of the new crash boxes against that of conventional crash boxes assembled by resistance spot-welding. Results show that the joining process is a good alternative to resistance spot-welding because the new crash boxes can absorb the same crushing energy, and because the new process helps to overcome typical manufacturing problems of welding.

[1]  Robert R. Mayer,et al.  Crash response of advanced high-strength steel tubes: Experiment and model , 2009 .

[2]  P. Martins,et al.  A new joining by forming process to produce lap joints in metal sheets , 2018 .

[3]  Mohammad Jawaid,et al.  Design and materials development of automotive crash box: a review , 2017 .

[4]  Abdul-Ghani Olabi,et al.  On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments , 2017 .

[5]  Zbigniew Gronostajski,et al.  Quasi-static and dynamic deformation of double-hat thin-walled elements of vehicle controlled body crushing zones joined by clinching , 2008 .

[6]  Paulo A.F. Martins,et al.  Revisiting the Fundamentals and Capabilities of the Stack Compression Test , 2011 .

[7]  Norman Jones,et al.  Influence of spot-weld failure on crushing of thin-walled structural sections , 2003 .

[8]  O. Hopperstad,et al.  Crashworthiness of aluminum extrusions subjected to oblique loading: experiments and numerical analyses , 2002 .

[9]  Wei-wen Yu,et al.  Bending strength of hybrid cold-formed steel beams , 2002 .

[10]  Fabrizio Micari,et al.  Joining by plastic deformation , 2013 .

[11]  Soo-Ik Oh,et al.  Crushing test of double hat-shaped members of dissimilar materials with adhesively bonded and self-piercing riveted joining methods , 2006 .

[12]  W. Altenhof,et al.  An experimental investigation into the cutting deformation mode of AA6061-T6 round extrusions , 2006 .

[13]  P. Martins,et al.  Joining sheets perpendicular to one other by sheet-bulk metal forming , 2017 .