Development of high-speed directly modulated DFB and DBR lasers with surface gratings

The conventional distributed feedback and distributed Bragg reflector edge-emitting lasers employ buried gratings, which require two or more epitaxial growth steps. By using lateral corrugations of the ridge-waveguide as surface gratings the epitaxial overgrowth is avoided, reducing the fabrication complexity, increasing the yield and reducing the fabrication cost. The surface gratings are applicable to different materials, including Al-containing ones and can be easily integrated in complex device structures and photonic circuits. Single-contact and multiple contact edge-emitting lasers with laterally-corrugated ridge waveguide gratings have been developed both on GaAs and InP substrates with the aim to exploit the photon-photon resonance in order to extend their direct modulation bandwidth. The paper reports on the characteristics of such surface-grating-based lasers emitting both at 1.3 and 1.55 μm and presents the photon-photon resonance extended small-signal modulation bandwidth (> 20 GHz) achieved with a 1.6 mm long single-contact device under direct modulation. Similarly structured devices, with shorter lengths are expected to exceed 40 GHz small-signal modulation bandwidth under direct modulation.

[1]  Masayuki Ishikawa,et al.  High speed quantum-well lasers and carrier transport effects , 1992 .

[2]  M. Pessa,et al.  Optical modeling of laterally-corrugated ridge-waveguide gratings , 2008 .

[3]  D. Deppe,et al.  Quantum-dot vertical-cavity surface-emitting laser based on the Purcell effect , 1999 .

[4]  L. Coldren,et al.  Diode Lasers and Photonic Integrated Circuits , 1995 .

[5]  I. Montrosset,et al.  22-GHz modulation bandwidth of long cavity DBR laser by using a weakly laterally coupled grating fabricated by focused ion beam lithography , 2004, IEEE Photonics Technology Letters.

[6]  U. Troppenz,et al.  Improving the Modulation Bandwidth in Semiconductor Lasers by Passive Feedback , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[7]  A. Vizzino,et al.  Dynamic simulation of clock recovery with self-pulsating three-section distributed-feedback lasers , 2002 .

[8]  Dirk Englund,et al.  Ultrafast photonic crystal nanocavity laser , 2006 .

[9]  Y. Wang,et al.  High-frequency modulation characteristics of 1.3-/spl mu/m InGaAs quantum dot lasers , 2004, IEEE Photonics Technology Letters.

[10]  L. A. Coldren,et al.  Extremely wide modulation bandwidth in a low threshold current strained quantum well laser , 1988 .

[11]  Haiyu Huang,et al.  Modulation characteristics of quantum-dot lasers: the influence of p-type doping and the electronic density of states on obtaining high speed , 2002 .

[12]  Yasuhiko Arakawa,et al.  Quantum noise and dynamics in quantum well and quantum wire lasers , 1984 .

[13]  M. K. Haldar,et al.  Enhancement of modulation bandwidth of laser diodes by injection locking , 1996, IEEE Photonics Technology Letters.

[14]  Gerrit Fiol,et al.  10 Gbit/s data modulation using 1.3 /spl mu/m InGaAs quantum dot lasers , 2005 .

[15]  R. Lang,et al.  Suppression of the relaxation oscillation in the modulated output of semiconductor lasers , 1976 .

[16]  I. Montrosset,et al.  Analysis of self-pulsating three-section DBR lasers , 2005, IEEE Journal of Selected Topics in Quantum Electronics.

[17]  M. Pessa,et al.  Narrow-linewidth distributed feedback lasers with laterally coupled ridge-waveguide surface gratings fabricated using nanoimprint lithography , 2011, OPTO.

[18]  I. Krestnikov,et al.  1.3 microm quantum dot laser in coupled-cavity-injection-grating design with bandwidth of 20 GHz under direct modulation. , 2008, Optics express.

[19]  Z. Mi,et al.  High-Speed Quantum Dot Lasers , 2007 .

[20]  A. Forchel,et al.  High-speed coupled-cavity injection grating lasers with tailored modulation transfer functions , 2004, IEEE Photonics Technology Letters.

[21]  M. Dumitrescu,et al.  Modified rate equation model including the photon-photon resonance , 2010 .