Grouting Reinforcement of Shallow and Small Clearance Tunnel

In order to solve the problem that shallow and small clearance tunnels are easy to cause city road to collapse and chapped, taking the Jinan Yuhan Road Tunnel under typical geological conditions as the research object, the stability criterion of the middle soil wall is determined using a mechanical model of the tunnel middle wall. A grouting test under different loads of undisturbed soil in the tunnel is designed, and numerical simulation of the grouting of the middle wall of different tunnel depths and spacing is performed. The results show that the stability of the middle wall of the shallow and small clearance tunnel is related to depth, spacing, and the physical-mechanical properties of soil. The physical-mechanical properties of soil change little after grouting reinforcement with the same final grouting pressure as the burial depth increases. The stability criterion curve of the middle wall of Yuhan Road Tunnel is obtained by the measurement results of grouting test samples, and the numerical simulation results obtained by the experimental parameters have a high degree of agreement with the theoretical curve. Based on the stability criterion curve, sectional grouting was performed in Yuhan Road Tunnel, and the soil around the tunnel was successfully reinforced.

[1]  C. Olgun,et al.  Risk Assessment of Water Inrush in Karst Tunnels Based on the Ideal Point Method , 2018, Polish Journal of Environmental Studies.

[2]  Qian Fang,et al.  Mechanical responses of existing tunnel due to new tunnelling below without clearance , 2018, Tunnelling and Underground Space Technology.

[3]  Shucai Li,et al.  Risk Assessment of Rockfall Hazardsin a Tunnel Portal Section Basedon Normal Cloud Model , 2017 .

[4]  Ashutosh Kainthola,et al.  Numerical analysis of surface subsidence in asymmetric parallel highway tunnels , 2017 .

[5]  Faisal I. Shalabi.  Interaction of Twin Circular Shallow Tunnels in Soils—Parametric Study , 2017 .

[6]  Mingfeng Lei,et al.  Model test to investigate failure mechanism and loading characteristics of shallow-bias tunnels with small clear distance , 2016 .

[7]  Wengang Zhang,et al.  Predictive models of ultimate and serviceability performances for underground twin caverns , 2016 .

[8]  Daniel Dias,et al.  3D numerical investigation of mechanized twin tunnels in soft ground – Influence of lagging distance between two tunnel faces , 2016 .

[9]  Junsheng Yang,et al.  An analytical solution for deforming twin‐parallel tunnels in an elastic half plane , 2015 .

[10]  Pierpaolo Oreste,et al.  3D numerical investigation on the interaction between mechanized twin tunnels in soft ground , 2015, Environmental Earth Sciences.

[11]  Isam Shahrour,et al.  Numerical analysis of the interaction between twin-tunnels: Influence of the relative position and construction procedure , 2008 .

[12]  A M Hefny,et al.  Parametric studies on the interaction between existing and new bored tunnels , 2004 .

[13]  Harvey J. Burd,et al.  Model testing of closely spaced tunnels in clay , 1998 .

[14]  Wang Gui-lin,et al.  Comparative Study of Rational Excavation Method and Support Parameter for Large-span Small-spacing Tunnel , 2011 .

[15]  Zheng Xuefen,et al.  FORKED TUNNEL STABILITY ANALYSIS AND ITS CONSTRUCTION OPTIMIZATION RESEARCH , 2008 .

[16]  Xie Zhuo-xiong,et al.  Study of mechanical behavior and reinforcing measures of middle rock wall of parallel tunnel with small interval , 2007 .

[17]  Jamshid Ghaboussi,et al.  Interaction between two parallel tunnels , 1977 .