Selective electrocatalysts toward a prototype of the membraneless direct methanol fuel cell

Mastery over the structure of nanomaterials enables control of their properties to enhance their performance for a given application. Herein we demonstrate the design and fabrication of Pt-based nanomaterials with enhanced catalytic activity and superior selectivity toward the reactions in direct methanol fuel cells (DMFCs) upon the deep understanding of the mechanisms of these electrochemical reactions. In particular, the ternary Au@Ag2S-Pt nanocomposites display superior methanol oxidation reaction (MOR) selectivity due to the electronic coupling effect among different domains of the nanocomposites, while the cage-bell structured Pt-Ru nanoparticles exhibit excellent methanol tolerance for oxygen reduction reaction (ORR) at the cathode because of the differential diffusion of methanol and oxygen in the porous Ru shell of the cage-bell nanoparticles. The good catalytic selectivity of these Pt-based nanomaterials via structural construction enables a DMFC to be built without a proton exchange membrane between the fuel electrode and the oxygen electrode.

[1]  D. Wilkinson,et al.  Aerobic and anaerobic operation of an active membraneless direct methanol fuel cell , 2012 .

[2]  P. Pickup,et al.  Modification of Nafion Proton Exchange Membranes to Reduce Methanol Crossover in PEM Fuel Cells , 1999 .

[3]  Toshiyuki Momma,et al.  On-chip fuel cell: micro direct methanol fuel cell of an air-breathing, membraneless, and monolithic design. , 2008, Journal of the American Chemical Society.

[4]  Jun Yang,et al.  Hollow and cage-bell structured nanomaterials of noble metals. , 2012, Journal of the American Chemical Society.

[5]  George A. Olah,et al.  Direct Methanol Fuel Cells , 2004 .

[6]  Tianshou Zhao,et al.  Effect of methanol crossover on the cathode behavior of a DMFC: A half-cell investigation , 2007 .

[7]  Hong Yang,et al.  Designer platinum nanoparticles: Control of shape, composition in alloy, nanostructure and electrocatalytic property , 2009 .

[8]  Jun Yang,et al.  Coalescence of Ag2S and Au nanocrystals at room temperature , 2011 .

[9]  Hongwei Zhang,et al.  Methanol-blocking Nafion composite membranes fabricated by layer-by-layer self-assembly for direct methanol fuel cells , 2012 .

[10]  Jackie Y Ying,et al.  Nanocomposites of Ag2S and noble metals. , 2011, Angewandte Chemie.

[11]  A. Shukla,et al.  An X-ray photoelectron spectroscopic study on the effect of Ru and Sn additions to platinised carbons , 1999 .

[12]  Lei Zhang,et al.  A review of anode catalysis in the direct methanol fuel cell , 2006 .

[13]  A. Shukla,et al.  Nafion and modified-Nafion membranes for polymer electrolyte fuel cells: An overview , 2009 .

[14]  T. Fuller,et al.  A Historical Perspective of Fuel Cell Technology in the 20th Century , 2002 .

[15]  José L. Fernández,et al.  Pd-Ti and Pd-Co-Au electrocatalysts as a replacement for platinum for oxygen reduction in proton exchange membrane fuel cells. , 2005, Journal of the American Chemical Society.

[16]  Bryan S. Pivovar,et al.  Direct Methanol Fuel Cells , 2003 .

[17]  Eugene S. Smotkin,et al.  Methanol crossover in direct methanol fuel cells: a link between power and energy density , 2002 .

[18]  X. Lou,et al.  Ultrathin and ultralong single-crystal platinum nanowire assemblies with highly stable electrocatalytic activity. , 2013, Journal of the American Chemical Society.

[19]  Fuqiang Liu,et al.  Low Crossover of Methanol and Water Through Thin Membranes in Direct Methanol Fuel Cells , 2006 .

[20]  Younan Xia,et al.  Shape-controlled synthesis of platinum nanocrystals for catalytic and electrocatalytic applications , 2009 .

[21]  J. Yang,et al.  Methanol‐Tolerant Heterogeneous PdCo@PdPt/C Electrocatalyst for the Oxygen Reduction Reaction , 2010 .

[22]  E. Gonzalez,et al.  An overview of platinum-based catalysts as methanol-resistant oxygen reduction materials for direct methanol fuel cells , 2008 .

[23]  G. Whitesides,et al.  Membraneless vanadium redox fuel cell using laminar flow. , 2002, Journal of the American Chemical Society.

[24]  H. Too,et al.  A highly efficient phase transfer method for preparing alkylamine-stabilized Ru, Pt, and Au nanoparticles. , 2004, Journal of colloid and interface science.

[25]  J. Ying,et al.  A general phase-transfer protocol for metal ions and its application in nanocrystal synthesis. , 2009, Nature materials.

[26]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[27]  Y. Sung,et al.  A Pd-impregnated nanocomposite Nafion membrane for use in high-concentration methanol fuel in DMFC , 2003 .

[28]  Changpeng Liu,et al.  A modified Nafion membrane with extremely low methanol permeability via surface coating of sulfonated organic silica. , 2012, Chemical communications.

[29]  Ermete Antolini,et al.  Formation of carbon-supported PtM alloys for low temperature fuel cells: a review , 2003 .

[30]  D. Wilkinson,et al.  Novel approach to membraneless direct methanol fuel cells using advanced 3D anodes , 2008 .

[31]  Paul J A Kenis,et al.  Air-breathing laminar flow-based microfluidic fuel cell. , 2005, Journal of the American Chemical Society.

[32]  Weijiang Zhou,et al.  Carbon-Supported Pseudo-Core–Shell Pd–Pt Nanoparticles for ORR with and without Methanol , 2008 .

[33]  Larry J. Markoski,et al.  Air-Breathing Laminar Flow-Based Direct Methanol Fuel Cell with Alkaline Electrolyte , 2006 .

[34]  Hiroyuki Uchida,et al.  Enhancement of the Electroreduction of Oxygen on Pt Alloys with Fe, Ni, and Co , 1999 .

[35]  Jiujun Zhang,et al.  Control of variable power conditions for a membraneless direct methanol fuel cell , 2009 .

[36]  A. Rigacci,et al.  Nafion®–sepiolite composite membranes for improved proton exchange membrane fuel cell performance , 2013 .

[37]  K. N. Han,et al.  Solubility of oxygen in aqueous electrolyte solutions , 1983 .