Erbium-doped polymer waveguide amplifiers for PCB-integrated optical links

Optical technologies are increasingly considered for use in high-performance electronic systems to overcome the performance bottleneck of electrical interconnects when operating at high frequencies and provide high-speed communication between electronic chips and modules. Polymer waveguides are leading candidates for implementing board-level optical interconnections as they exhibit favourable mechanical, thermal and optical properties for direct integration onto conventional printed circuit boards (PCBs). Numerous system demonstrators have been reported in recent years featuring different types of polymer materials and opto-electronic (OE) PCB designs. However, all demonstrated polymer-based interconnection technologies are currently passive, which limits the length of the on-board links and the number of components that can be connected in optical bus architectures. In this paper therefore, we present work towards the formation of low-cost optical waveguide amplifiers that can be readily integrated onto standard PCBs by combining two promising optical technologies: siloxane-based polymers and ultra-fast laser plasma implantation (ULPI). Siloxane-based waveguides exhibit high-temperature resistance in excess of 300°C and low loss at different wavelength ranges, while ULPI has been demonstrated to produce very high dopant concentrations in glass thin films with values of 1.63×1021 cm−3 recently reported in Er-doped silica layers. Here we present detailed simulation studies that demonstrate the potential to achieve a internal gain of up to 8 dB/cm from such structures and report on initial experimental work on Er-doped films and waveguides demonstrating photoluminescence and good lifetimes.

[1]  Roger Dangel,et al.  Polymer waveguides for electro-optical integration in data centers and high-performance computers. , 2015, Optics express.

[2]  Dimitri Geskus,et al.  Gain bandwidth of 80 nm and 2 dB/cm peak gain in Al2O3:Er3+ optical amplifiers on silicon , 2010 .

[3]  Hatun Cinkaya,et al.  Spectroscopic investigation of zinc tellurite glasses doped with Yb(3+) and Er(3+) ions. , 2016, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[4]  R. S. Quimby,et al.  General procedure for the analysis of Er(3+) cross sections. , 1991, Optics letters.

[5]  R. V. Penty,et al.  Low-Cost PCB-Integrated 10-Gb/s Optical Transceiver Built With a Novel Integration Method , 2013, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[6]  Harry R. Allcock,et al.  Novel Highly Fluorinated Perfluorocyclobutane-Based Phosphazene Polymers for Photonic Applications , 2007 .

[7]  Jianguo Tian,et al.  Er(3)/Yb(3)-codoped phosphate glass for short-length high-gain fiber lasers and amplifiers. , 2015, Applied optics.

[8]  Felix Betschon,et al.  Thermally Stable, Low Loss Optical Silicones: A Key Enabler for Electro-Optical Printed Circuit Boards , 2015, Journal of Lightwave Technology.

[9]  L. Schares,et al.  160 Gb/s Bidirectional Polymer-Waveguide Board-Level Optical Interconnects Using CMOS-Based Transceivers , 2009, IEEE Transactions on Advanced Packaging.

[10]  J. Chen,et al.  56 Gb/s PAM-4 data transmission over a 1 m long multimode polymer interconnect , 2015, 2015 Conference on Lasers and Electro-Optics (CLEO).

[11]  Markus Pollnau,et al.  High optical gain in erbium-doped potassium double tungstate channel waveguide amplifiers. , 2018, Optics express.

[12]  T. Rapala-Virtanen,et al.  Development of electro-optical PCBs with embedded waveguides for data center and high performance computing applications , 2014, Photonics West - Optoelectronic Materials and Devices.

[13]  C. R. Giles,et al.  Modeling erbium-doped fiber amplifiers , 1991 .

[14]  Animesh Jha,et al.  Target dependent femtosecond laser plasma implantation dynamics in enabling silica for high density erbium doping , 2015, Scientific Reports.

[15]  Steve Madden,et al.  980nm pumped erbium doped tellurium oxide planar rib waveguide laser and amplifier with gain in S, C and L band. , 2015, Optics express.

[16]  Takaaki Ishigure,et al.  Circular core single-mode polymer optical waveguide fabricated using the Mosquito method with low loss at 1310/1550 nm. , 2017, Optics express.

[17]  Albert Polman,et al.  Absorption and emission spectroscopy in Er3+–Yb3+ doped aluminum oxide waveguides , 2003 .

[18]  K. Sugioka,et al.  Ultrafast lasers—reliable tools for advanced materials processing , 2014, Light: Science & Applications.

[19]  Zhen Zhen,et al.  LaF3:Er,Yb doped sol–gel polymeric optical waveguide amplifiers , 2008 .

[20]  Brandon W. Swatowski,et al.  Graded index silicone waveguides for high performance computing , 2014, 2014 Optical Interconnects Conference.

[21]  Richard V. Penty,et al.  Erbium-doped glass nanoparticle embedded polymer thin films using femtosecond pulsed laser deposition , 2018 .

[22]  David A. B. Miller,et al.  Device Requirements for Optical Interconnects to Silicon Chips , 2009, Proceedings of the IEEE.

[23]  Animesh Jha,et al.  Doping silica beyond limits with laser plasma for active photonic materials , 2015 .

[24]  Detlef Kip,et al.  Er:Ti:LiNbO3 ridge waveguide optical amplifiers by optical grade dicing and three-side Er and Ti in-diffusion , 2017 .

[25]  N. Olsson,et al.  Erbium-Doped Fiber Amplifiers: Fundamentals and Technology , 1999 .

[26]  Markus Pollnau,et al.  Erbium‐doped integrated waveguide amplifiers and lasers , 2011 .

[27]  Roger Dangel,et al.  Laser Direct Writing of Single-Mode Polysiloxane Optical Waveguides and Devices , 2014, Journal of Lightwave Technology.

[28]  Maurizio Ferrari,et al.  Erbium-doped tellurite glasses with high quantum efficiency and broadband stimulated emission cross section at 1.5 μm , 2003 .

[29]  J. Beals,et al.  Cost-Effective Multimode Polymer Waveguides for High-Speed On-Board Optical Interconnects , 2009, IEEE Journal of Quantum Electronics.

[30]  Qu Li,et al.  Improved gain characteristics by forward-backward pumped configuration in erbium-ytterbium–doped phosphate glass waveguide amplifier , 2007 .

[31]  A Jha,et al.  Review on structural, thermal, optical and spectroscopic properties of tellurium oxide based glasses for fibre optic and waveguide applications , 2012 .

[32]  Giancarlo C. Righini,et al.  Photoluminescence of rare-earth-doped glasses , 2006 .

[33]  Markus A. Schmidt,et al.  Interfacial reactions between tellurite melts and silica during the production of microstructured optical devices , 2011 .

[34]  T. T. Fernandez,et al.  Multi-ion diffusion in silica glass using femtosecond pulsed laser deposition , 2012, 2012 Conference on Lasers and Electro-Optics (CLEO).

[35]  Harri Lipsanen,et al.  Enhancement of the photoluminescence in Er-doped Al2O3 fabricated by atomic layer deposition , 2016, SPIE OPTO.

[36]  Bert J. Offrein,et al.  Flexible, stable, and easily processable optical silicones for low loss polymer waveguides , 2013, Photonics West - Optoelectronic Materials and Devices.

[37]  D. Mccumber,et al.  Einstein Relations Connecting Broadband Emission and Absorption Spectra , 1964 .