Low-cost feedback-controlled syringe pressure pumps for microfluidics applications

Microfluidics are widely used in research ranging from bioengineering and biomedical disciplines to chemistry and nanotechnology. As such, there are a large number of options for the devices used to drive and control flow through microfluidic channels. Commercially available syringe pumps are probably the most commonly used instruments for this purpose, but are relatively high-cost and have inherent limitations due to their flow profiles when they are run open-loop. Here, we present a low-cost ($110) syringe pressure pump that uses feedback control to regulate the pressure into microfluidic chips. Using an open-source microcontroller board (Arduino), we demonstrate an easily operated and programmable syringe pump that can be run using either a PID or bang-bang control method. Through feedback control of the pressure at the inlets of two microfluidic geometries, we have shown stability of our device to within ±1% of the set point using a PID control method and within ±5% of the set point using a bang-bang control method with response times of less than 1 second. This device offers a low-cost option to drive and control well-regulated pressure-driven flow through microfluidic chips.

[1]  G. Whitesides,et al.  Microfluidic devices fabricated in Poly(dimethylsiloxane) for biological studies , 2003, Electrophoresis.

[2]  G M Whitesides,et al.  Patterning cells and their environments using multiple laminar fluid flows in capillary networks. , 1999, Proceedings of the National Academy of Sciences of the United States of America.

[3]  D. Weitz,et al.  Droplet microfluidics: A tool for biology, chemistry and nanotechnology , 2016 .

[4]  Francis Lin,et al.  Generation of dynamic temporal and spatial concentration gradients using microfluidic devices. , 2004, Lab on a chip.

[5]  Wan Kyun Chung,et al.  Tuning-free controller to accurately regulate flow rates in a microfluidic network , 2016, Scientific reports.

[6]  H. Stone,et al.  Microfluidics: Basic issues, applications, and challenges , 2001 .

[7]  Andreas Manz,et al.  Microfluidics: Applications for analytical purposes in chemistry and biochemistry , 2008, Electrophoresis.

[8]  Nitin Afzulpurkar,et al.  Micro Electromechanical Systems (MEMS) Based Microfluidic Devices for Biomedical Applications , 2011, International journal of molecular sciences.

[9]  William C. Messner,et al.  Detection of Dynamic Spatiotemporal Response to Periodic Chemical Stimulation in a Xenopus Embryonic Tissue , 2011, PloS one.

[10]  D. Beebe,et al.  Physics and applications of microfluidics in biology. , 2002, Annual review of biomedical engineering.

[11]  Piotr Garstecki,et al.  Effects of unsteadiness of the rates of flow on the dynamics of formation of droplets in microfluidic systems. , 2011, Lab on a chip.

[12]  G. Whitesides,et al.  Microfabrication inside capillaries using multiphase laminar flow patterning , 1999, Science.

[13]  Martin Dufva,et al.  Multi-channel peristaltic pump for microfluidic applications featuring monolithic PDMS inlay. , 2009, Lab on a chip.

[14]  Brandon Kuczenski,et al.  Modulation of fluidic resistance and capacitance for long-term, high-speed feedback control of a microfluidic interface. , 2009, Lab on a chip.

[15]  Joshua M. Pearce,et al.  Open-Source Syringe Pump Library , 2014, PloS one.

[16]  W. Messner,et al.  Pressure-driven spatiotemporal control of the laminar flow interface in a microfluidic network. , 2007, Lab on a chip.

[17]  L. Tsimring,et al.  Entrainment of a Population of Synthetic Genetic Oscillators , 2011, Science.

[18]  P. Yager,et al.  Biotechnology at low Reynolds numbers. , 1996, Biophysical journal.

[19]  Robert Langer,et al.  Microfluidics in Nanomedicine , 2015 .

[20]  Roland Zengerle,et al.  Continuous microfluidic DNA extraction using phase-transfer magnetophoresis. , 2010, Lab on a chip.