Performance-Based Multiobjective Optimal Seismic Retrofit Method for a Steel Moment-Resisting Frame Considering the Life-Cycle Cost
暂无分享,去创建一个
Hyo Seon Park | Byung Kwan Oh | Se Woon Choi | Yousok Kim | Dong Chul Lee | H. Park | B. Oh | Yousok Kim | Se Woon Choi | Dong chul Lee
[1] K. Dejong,et al. An analysis of the behavior of a class of genetic adaptive systems , 1975 .
[2] W. J. Hall,et al. Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings , 2001 .
[3] D. E. Goldberg,et al. Genetic Algorithms in Search , 1989 .
[4] Cale Ash,et al. Seismic Rehabilitation of an Existing Braced Frame Hospital Building by Direct Replacement with Buckling-Restrained Braces , 2009 .
[5] W. J. Hall,et al. Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings , 2000 .
[6] Min Liu,et al. Life cycle cost oriented seismic design optimization of steel moment frame structures with risk-taking preference , 2004 .
[7] Hyo Seon Park,et al. Multi-objective seismic design method for ensuring beam-hinging mechanism in steel frames , 2012 .
[8] M. Asce,et al. MERGING LIFE CYCLE COST ANALYSIS AND PERFORMANCE-BASED DESIGN , 2000 .
[9] Jamie E. Padgett,et al. Risk-based seismic life-cycle cost–benefit (LCC-B) analysis for bridge retrofit assessment , 2010 .
[10] Sang Whan Han,et al. Cyclic behaviour of post-Northridge WUF-B connections , 2007 .
[11] Chia-Ming Uang,et al. Seismic Upgrade of a 15-Story Steel Moment Frame Building—Satisfying Performance Criteria with Application of Experimental and Analytical Procedures , 2009 .
[12] Y. K. Wen,et al. Minimum Life-Cycle Cost Structural Design Against Natural Hazards , 2000 .
[13] Jaehong Lee,et al. Seismic demand evaluation of steel MRF buildings with simple and detailed connection models , 2010 .
[14] W. Liu,et al. Seismic Evaluation and Rehabilitation of a Three Story Pre-Northridge Steel Frame Essential Service Facility , 2009 .
[15] Kenneth Alan De Jong,et al. An analysis of the behavior of a class of genetic adaptive systems. , 1975 .
[16] David E. Goldberg,et al. Genetic Algorithms in Search Optimization and Machine Learning , 1988 .
[17] Manolis Papadrakakis,et al. Performance-based multiobjective optimum design of steel structures considering life-cycle cost , 2006 .
[18] D. A. Foutch,et al. Evaluation of Connection Fracture and Hysteresis Type on the Seismic Response of Steel Buildings , 1997 .
[19] Bozidar Stojadinovic,et al. Parametric Tests on Unreinforced Steel Moment Connections , 2000 .
[20] John L. Gross,et al. Modification of Existing Welded Steel Moment Frame Connections for Seismic Resistance | NIST , 2001 .
[21] Albert Chen,et al. Seismic rehabilitation of pre-Northridge steel moment connections: A case study , 2006 .
[22] Saif M. Hussain,et al. Viscous Fluid Damper Retrofit of Pre-Northridge Steel Moment Frame Structures , 2007 .
[23] DebK.,et al. A fast and elitist multiobjective genetic algorithm , 2002 .
[24] Kalyanmoy Deb,et al. A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..
[25] Makoto Ohsaki,et al. Optimal placement of braces for steel frames with semi-rigid joints by scatter search , 2008 .
[26] James M. Ricles,et al. INELASTIC CYCLIC TESTING OF WELDED UNREINFORCED MOMENT CONNECTIONS , 2002 .
[27] Ersin Aydin,et al. Optimal placement of steel diagonal braces for upgrading the seismic capacity of existing structures and its comparison with optimal dampers , 2008 .
[28] Min Liu,et al. Optimal seismic design of steel frame buildings based on life cycle cost considerations , 2003 .
[29] Douglas A. Foutch,et al. Seismic Performance Evaluation of Pre-Northridge Steel Frame Buildings with Brittle Connections , 2002 .
[30] Andrea Prota,et al. Multi‐hazard upgrade decision making for critical infrastructure based on life‐cycle cost criteria , 2011 .