On the intensity of linear elastic high order singularities ahead of cracks and re-entrant corners

Abstract The paper deals with high order elastic singular terms at cracks and re-entrant corners (sharp V-notches), which are commonly omitted in linear elastic analyses by the argument that the strain energy and displacements in the near-tip region should be bounded. The present analysis proves that these terms are fully included in the elastic part of complete elastic–plastic stress and strain solutions. The intensities of high order singular terms are found to be linked to the linear elastic stress intensity factor and the extension of the plastic zone along the crack bisector line. The smaller the plastic radius, the smaller the intensities of high order singular terms are. A physical justification of the existence of high order singular terms is provided on the basis of the strain energy density distribution detected along the crack bisector line. Finally, the influence of the V-notch opening angle is made explicit, discussing also the relationship between the singularity orders and the solution of a Williams’ type sinusoidal eigen-equation.

[1]  M. Pavier,et al.  The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading , 2001 .

[2]  J. Rice,et al.  Limitations to the small scale yielding approximation for crack tip plasticity , 1974 .

[3]  P. Morse,et al.  Methods of theoretical physics , 1955 .

[4]  Yan Chen,et al.  Closed form solutions of T-stress in plane elasticity crack problems , 2000 .

[5]  M. Williams,et al.  On the Stress Distribution at the Base of a Stationary Crack , 1956 .

[6]  Paolo Lazzarin,et al.  A unified approach to the analysis of nonlinear stress and strain fields ahead of mode III-loaded notches and cracks , 2010 .

[7]  J. Willis,et al.  Matched asymptotic expansions in nonlinear fracture mechanics—III. In-plane loading of an elastic perfectly-plastic symmetric specimen , 1977 .

[8]  Michele Zappalorto,et al.  Analytical study of the elastic–plastic stress fields ahead of parabolic notches under antiplane shear loading , 2007 .

[9]  P. Lazzarin,et al.  Stress field equations for U and blunt V-shaped notches in axisymmetric shafts under torsion , 2010 .

[10]  Paolo Lazzarin,et al.  A new version of the Neuber rule accounting for the influence of the notch opening angle for out-of-plane shear loads , 2009 .

[11]  M. N. James,et al.  Towards a new model of crack tip stress fields , 2007 .

[12]  G. Arfken.  Mathematical Methods for Physicists , 1967 .

[13]  Martin L. Dunn,et al.  Fracture initiation at three-dimensional bimaterial interface corners , 2001 .

[14]  Irene A. Stegun,et al.  Handbook of Mathematical Functions. , 1966 .

[15]  William F. Brown,et al.  Stress-Intensity Factors for a Single-Edge-Notch Tension Specimen by Boundary Collocation of a Stress Function , 1964 .

[16]  A. J. Carlsson,et al.  Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials , 1973 .

[17]  H. Neuber.  Theory of Stress Concentration for Shear-Strained Prismatical Bodies With Arbitrary Nonlinear Stress-Strain Law , 1961 .

[18]  Filippo Berto,et al.  Elastic notch stress intensity factors for sharply V-notched rounded bars under torsion , 2009 .

[19]  Andy Ruina,et al.  Why K? High order singularities and small scale yielding , 1995 .

[20]  Michele Zappalorto,et al.  Elastic stress distributions for hyperbolic and parabolic notches in round shafts under torsion and uniform antiplane shear loadings , 2008 .

[21]  John W. Hutchinson,et al.  Plastic stress and strain fields at a crack tip , 1968 .

[22]  Norio Hasebe,et al.  Explicit formulations of the J-integral considering higher order singular terms in eigenfunction expansion forms Part I. Analytical treatments , 1997 .

[23]  J. Willis,et al.  Matched asymptotic expansions in nonlinear fracture mechanics—II. Longitudinal shear of an elastic work-hardening plastic specimen , 1976 .

[24]  John R. Rice,et al.  Stresses Due to a Sharp Notch in a Work-Hardening Elastic-Plastic Material Loaded by Longitudinal Shear , 1967 .

[25]  J. Rice,et al.  Plane strain deformation near a crack tip in a power-law hardening material , 1967 .

[26]  Insu Jeon,et al.  The role of higher order eigenfields in elastic–plastic cracks , 2001 .

[27]  John W. Hutchinson,et al.  Singular behaviour at the end of a tensile crack in a hardening material , 1968 .

[28]  Bernard Gross,et al.  Stress-Intensity Factors for Single-Edge-Notch Specimens in Bending or Combined Bending and Tension by Boundary Collocation of a Stress Function , 1965 .

[29]  J. Willis,et al.  Matched asymptotic expansions in nonlinear fracture mechanics—I. longitudinal shear of an elastic perfectly-plastic specimen , 1976 .

[30]  F. Berto,et al.  On Higher Order Terms in the Crack Tip Stress Field , 2010 .

[31]  Michele Zappalorto,et al.  Plastic notch stress intensity factors for pointed V-notches under antiplane shear loading , 2008 .

[32]  Theo Fett,et al.  T-stress and crack path stability of DCDC specimens , 2003 .