Centimeter-Sized Aplanatic Hybrid Diffractive-Refractive Lens

The design and the fabrication of a hybrid diffractive-refractive lens (HDRL) by the femtosecond laser direct writing technique at 343-nm wavelength are demonstrated. The diffractive part is a 10-mm-diameter aplanatic element inside a Z-cut sapphire wafer. The refractive part is a spherical planoconvex lens with a 9.3-mm radius of curvature. These two parts are jointly combined to constitute a diffractive-refractive singlet. The hybrid singlet realizes aplanatic action for the aspherical lens, which reduces the focal spot size of the spherical lens by 1/4. The modulation transfer function of the hybrid singlet shows a better imaging resolution performance than that of the single spherical lens. The diffractive elements inside the spherical lens also were made and not only further improve thermal stability of the optical system but also reduce the volume and weight. This HDRL can find important applications in diffractive reflective hybrid optics, super-resolution imaging, and integrated optics.

[1]  K. Sugioka,et al.  Ultrafast lasers—reliable tools for advanced materials processing , 2014, Light: Science & Applications.

[2]  Saulius Juodkazis,et al.  Application of femtosecond laser pulses for microfabrication of transparent media , 2002 .

[3]  K. Miura,et al.  Femtosecond laser-writing of 3D crystal architecture in glass: Growth dynamics and morphological control , 2018 .

[4]  Koji Sugioka,et al.  Three-dimensional micro-optical components embedded in photosensitive glass by a femtosecond laser. , 2003, Optics letters.

[5]  Saulius Juodkazis,et al.  Three-dimensional microfabrication of materials by femtosecond lasers for photonics applications , 2009 .

[6]  Qidai Chen,et al.  Plasmonic nano-printing: large-area nanoscale energy deposition for efficient surface texturing , 2017, Light: Science & Applications.

[7]  Peter G. Kazansky,et al.  Ultrafast laser direct writing and nanostructuring in transparent materials , 2014 .

[8]  Multilevel phase-type diffractive lens embedded in sapphire. , 2017, Optics letters.

[9]  Qidai Chen,et al.  Aplanatic Zone Plate Embedded in Sapphire , 2018, IEEE Photonics Technology Letters.

[10]  N. George,et al.  Hybrid diffractive-refractive lenses and achromats. , 1988, Applied optics.

[11]  Saulius Juodkazis,et al.  Discrete damage traces from filamentation of Gauss-Bessel pulses. , 2006, Optics letters.

[12]  Saulius Juodkazis,et al.  Laser induced memory bits in photorefractive LiNbO3 and LiTaO3 , 2008 .

[13]  A. Seifert,et al.  Wave-optical design of a combined refractive-diffractive varifocal lens. , 2014, Optics express.

[14]  Koji Sugioka,et al.  Low-threshold whispering-gallery-mode microlasers fabricated in a Nd:glass substrate by three-dimensional femtosecond laser micromachining. , 2013, Optics letters.

[15]  Qing Yang,et al.  Maskless fabrication of concave microlens arrays on silica glasses by a femtosecond-laser-enhanced local wet etching method. , 2010, Optics express.

[16]  Masaaki Sakakura,et al.  Fabrication of three-dimensional 1 x 4 splitter waveguides inside a glass substrate with spatially phase modulated laser beam. , 2010, Optics express.

[17]  F. Wang,et al.  Optical-induced electrical current in diamond switched by femtosecond–attosecond laser pulses by ab initio simulations , 2016 .

[18]  Feng Chen,et al.  Femtosecond laser written optical waveguides in z-cut MgO:LiNbO3 crystal: Fabrication and optical damage investigation , 2016 .

[19]  K. Miura,et al.  Writing waveguides in glass with a femtosecond laser. , 1996, Optics letters.

[20]  Yingbai Yan,et al.  Theories for the design of a hybrid refractive-diffractive superresolution lens with high numerical aperture. , 2003, Journal of the Optical Society of America. A, Optics, image science, and vision.

[21]  Saulius Juodkazis,et al.  Nano-groove and 3D fabrication by controlled avalanche using femtosecond laser pulses , 2013 .