A process integration approach for design of hybrid power systems with energy storage

Selection of energy storage technology in hybrid power systems (HPS) is vital due to the unique advantages and capabilities offered by different storage technologies. For an optimal operation, the efficient and economical storage system for an HPS should be selected. This work introduces a new systematic generic framework to determine the most cost-effective storage technology for an HPS. A Power Pinch Analysis tool called the AC/DC modified storage cascade table has been developed to optimise the HPS by considering various storage technologies. The economics of the various types of storage modes was analysed, taking into account the associated energy losses, among others. The method was applied to two case studies with different power trends to evaluate the effect of storage efficiencies and storage form on the performance of HPS. A superconducting magnetic storage system of 26.12 kWh capacity, that gives an investment payback period of 3.6 years, is the most cost-effective storage technology for the small-scale household system in Case Study 1. For the large-scale industrial application presented in Case Study 2, the Lead–Acid battery with a capacity of 15.38 MWh gives the lowest payback period (1.43 years).

[1]  K. Chatterjee,et al.  Design of isolated renewable hybrid power systems , 2010 .

[2]  Marta Basualdo,et al.  Energy management of a hybrid system based on wind–solar power sources and bioethanol , 2013 .

[3]  Susan M. Schoenung,et al.  Long- vs. short-term energy storage technologies analysis : a life-cycle cost study : a study for the DOE energy storage systems program. , 2003 .

[4]  ELECTRICITY STORAGE AND RENEWABLES FOR ISLAND POWER , 2015 .

[5]  Qi Zhiping,et al.  Review of Flywheel Energy Storage System , 2008 .

[6]  Zheng Li,et al.  Thermodynamic analysis of a hybrid thermal-compressed air energy storage system for the integration of wind power , 2014 .

[7]  Christine Elizabeth Schoppe Wind and Pumped-Hydro Power Storage: Determining Optimal Commitment Policies with Knowledge Gradient Non-Parametric Estimation , 2010 .

[8]  Gianfranco Rizzo,et al.  Application of dynamic programming to the optimal management of a hybrid power plant with wind turbines, photovoltaic panels and compressed air energy storage , 2012 .

[9]  John R. Flower,et al.  Synthesis of heat exchanger networks: I. Systematic generation of energy optimal networks , 1978 .

[10]  Andreas Sumper,et al.  Energy management of flywheel-based energy storage device for wind power smoothing , 2013 .

[11]  Niklas Hartmann,et al.  Simulation and analysis of different adiabatic Compressed Air Energy Storage plant configurations , 2012 .

[12]  Philippe Lauret,et al.  Technico-economical analysis of a hybrid wave power-air compression storage system , 2015 .

[13]  Mohammad Yusri Hassan,et al.  Process Integration techniques for optimal design of hybrid power systems , 2013 .

[14]  Iman Janghorban Esfahani,et al.  Extended-power pinch analysis (EPoPA) for integration of renewable energy systems with battery/hydrogen storages , 2015 .

[15]  J. Tamura,et al.  Grid Frequency Mitigation Using SMES of Optimum Power and Energy Storage Capacity , 2012 .

[16]  B. Elmegaard,et al.  Efficiency of Compressed Air Energy Storage , 2011 .

[17]  Andreas Poullikkas,et al.  Overview of current and future energy storage technologies for electric power applications , 2009 .

[18]  Haisheng Chen,et al.  Progress in electrical energy storage system: A critical review , 2009 .

[19]  Mohammad Yusri Hassan,et al.  Process integration of hybrid power systems with energy losses considerations , 2013 .

[20]  G. Papadakis,et al.  A stand-alone photovoltaic power system for remote villages using pumped water energy storage , 2004 .

[21]  Jeng Shiun Lim,et al.  Combined design and load shifting for distributed energy system , 2013, Clean Technologies and Environmental Policy.

[22]  Kyle Bradbury Energy Storage Technology Review , 2010 .

[23]  Mohammad Yusri Hassan,et al.  Optimal hybrid renewable energy design in autonomous system using Iterative-Pareto-Fuzzy technique , 2015 .

[24]  Z. Fonyó,et al.  SYNTHESIS OF HEAT EXCHANGER NETWORKS , 1982 .

[25]  Jiaqi Liang,et al.  Pumped storage hydro-plant models for system transient and long-term dynamic studies , 2010, IEEE PES General Meeting.

[26]  Susan M. Schoenung,et al.  Long vs. short-term energy storage:sensitivity analysis. , 2007 .

[27]  Adrian Ilinca,et al.  Energy storage systems—Characteristics and comparisons , 2008 .

[28]  Hans Bernhoff,et al.  Flywheel energy and power storage systems , 2007 .

[29]  Mohammad Yusri Hassan,et al.  Review of storage schemes for wind energy systems , 2013 .

[30]  Haji Hassan Masjuki,et al.  Energy and electricity consumption analysis of Malaysian industrial sector , 2009 .

[31]  Gilles Notton,et al.  ANALYSIS OF PUMPED HYDROELECTRIC STORAGE FOR A WIND/PV SYSTEM FOR GRID INTEGRATION , 2011 .

[32]  Jian Xun Jin,et al.  Study on the SMES Application Solutions for Smart Grid , 2012 .

[33]  Ming Qiu,et al.  Design, dynamic simulation and construction of a hybrid HTS SMES (high-temperature superconducting magnetic energy storage systems) for Chinese power grid , 2013 .

[34]  Ruxandra Vidu,et al.  Solar Energy Storage Methods , 2011 .

[35]  R. Sebastian,et al.  Flywheel energy storage systems: Review and simulation for an isolated wind power system , 2012 .

[36]  W. Hassenzahl Superconducting magnetic energy storage , 1978 .

[37]  Jiří Jaromír Klemeš,et al.  A process integration targeting method for hybrid power systems , 2012 .

[38]  Jiří Jaromír Klemeš,et al.  Recent developments in Process Integration , 2013 .

[39]  Santanu Bandyopadhyay Applications of Pinch Analysis in the Design of Isolated Energy Systems , 2013 .

[40]  João Peças Lopes,et al.  Characterisation of electrical energy storage technologies , 2013 .

[41]  Mohammad Yusri Hassan,et al.  Optimisation of pumped-hydro storage system for hybrid power system using power pinch analysis , 2013 .

[42]  L. Bayón,et al.  Mathematical modelling of the combined optimization of a pumped-storage hydro-plant and a wind park , 2013, Math. Comput. Model..

[43]  Warren D. Seider,et al.  Product and Process Design Principles: Synthesis, Analysis, and Evaluation , 1998 .

[44]  A. Morandi,et al.  Feasibility of Superconducting Magnetic Energy Storage on Board of Ground Vehicles With Present State-of-the-Art Superconductors , 2012, IEEE Transactions on Applied Superconductivity.

[45]  R. Ruther,et al.  Site-dependent system performance and optimal inverter sizing of grid-connected PV systems , 2005, Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005..

[46]  Toshko Zhelev,et al.  Further emissions and energy targeting: an application of CO2 emissions pinch analysis to the Irish electricity generation sector , 2010 .

[47]  Rustom Mamlook,et al.  Toward clean environment: evaluation of solar electric power technologies using fuzzy logic , 2012, Clean Technologies and Environmental Policy.

[48]  Jiří Jaromír Klemeš,et al.  Forty years of Heat Integration: Pinch Analysis (PA) and Mathematical Programming (MP) , 2013 .

[49]  Sharifah Rafidah Wan Alwi,et al.  New graphical tools for process changes via load shifting for hybrid power systems based on Power Pinch Analysis , 2013, Clean Technologies and Environmental Policy.

[50]  M. Jentsch,et al.  Optimal Use of Power-to-Gas Energy Storage Systems in an 85% Renewable Energy Scenario , 2014 .

[51]  Sandro Macchietto,et al.  SAHPPA: a novel power pinch analysis approach for the design of off-grid hybrid energy systems , 2013, Clean Technologies and Environmental Policy.

[52]  J. Kleissl,et al.  Energy dispatch schedule optimization and cost benefit analysis for grid-connected, photovoltaic-battery storage systems , 2013 .

[53]  R. Socolow,et al.  Compressed Air Energy Storage : Theory , Resources , And Applications For Wind Power 8 , 2008 .

[54]  Erin Baker,et al.  Evaluating energy storage technologies for wind power integration , 2012 .

[55]  Daniel H. Loughlin,et al.  Methodology for examining potential technology breakthroughs for mitigating CO2 and application to centralized solar photovoltaics , 2013, Clean Technologies and Environmental Policy.