About the preliminary design of a self-aligning energy absorber system for railway vehicles

A new impact energy absorber for a railway car, which maintains its optimal performances even when an impact with a vertical offset occurs, is described. Starting from the description of the concept design, the present paper moves on to the structural optimisation of its components, in respect of both the functionality of the entire system and the maximum deformation energy that it can absorb, even in the case of an offset. A numerical simulation of the impact between two absorbers with offset verifies the effectiveness of the design choices. The numerical model has been also developed to reproduce the behaviour of the absorber under a falling impact mass that is made by means of a full-scale drop test, achieving a support of the effectiveness of both the simulation and the proposed concept.

[1]  A. G. Kaskey,et al.  An impact energy-absorbing strut employing tube cutting , 1968 .

[2]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[3]  Robert J. Hayduk,et al.  Extensional collapse modes of structural members , 1984 .

[4]  T. Wierzbicki,et al.  Axial Crushing of Multicorner Sheet Metal Columns , 1989 .

[5]  O. Hopperstad,et al.  Static and dynamic axial crushing of square thin-walled aluminium extrusions , 1996 .

[6]  O. Hopperstad,et al.  Crashworthiness of aluminium extrusions: validation of numerical simulation, effect of mass ratio and impact velocity , 1999 .

[7]  Abdulmalik A. Alghamdi.  Smart frictional impact energy absorber , 2000 .

[8]  Abdulmalik A. Alghamdi,et al.  Collapsible impact energy absorbers: an overview , 2001 .

[9]  Tongxi Yu,et al.  Energy absorption in splitting square metal tubes , 2002 .

[10]  Tongxi Yu,et al.  On the axial splitting and curling of circular metal tubes , 2002 .

[11]  D. Tyrell,et al.  Impact test of a crash-energy management passenger rail car , 2004, ASME/IEEE Joint Rail Conference, 2004. Proceedings of the 2004.

[12]  Chih-Cheng Yang,et al.  Dynamic Progressive Buckling of Square Tubes , 2005 .

[13]  Mahmoud Shakeri,et al.  Expansion of circular tubes by rigid tubes as impact energy absorbers: experimental and theoretical investigation , 2007 .

[14]  Conor O'Neill,et al.  Design and analysis of lightweight energy absorbers for a rail vehicle cab , 2009 .

[15]  Tongxi Yu,et al.  Energy absorption of an axially crushed square tube with a buckling initiator , 2009 .

[16]  P. Hosseini-Tehrani,et al.  Study on crashworthiness of wagon's frame under frontal impact , 2011 .

[17]  F. M. Mwangi,et al.  Development of granular-medium-based impact energy management system , 2012 .

[18]  Michele Colloca,et al.  Mechanical properties and failure mechanisms of closed-cell PVC foams , 2012 .

[19]  Sai Hong Tang,et al.  Effect of length on crashworthiness parameters and failure modes of steel and hybrid tube made by steel and GFRP under low velocity impact , 2012 .

[20]  Anindya Deb,et al.  Energy absorption behaviours of CSM-based GFRC plates with hemispherical features , 2012 .

[21]  Ali Ghamarian,et al.  Crashworthiness investigation of conical and cylindrical end-capped tubes under quasi-static crash loading , 2012 .