An innovative method for the design of high energy performance building envelopes

In this paper, an innovative method to minimise energy losses through building envelopes is presented, using the Proper Generalised Decomposition (PGD), written in terms of space x, time t, thermal diffusivity α and envelope thickness L. The physical phenomenon is solved at once, contrarily to classical numerical methods that cannot create a parameter dependent model. First, the PGD solution is validated with an analytical solution to prove its accuracy. Then a complex case study of a multi-layer wall submitted to transient boundary conditions is investigated. The parametric solution is computed as a function of the space and time coordinates, as well as the thermal insulation thickness and the load material thermal diffusivity. Physical behaviour and conduction loads are analysed for 76 values of thermal insulation thickness and 100 types of load material properties. Furthermore, the reduced computational cost of the PGD is highlighted. The method computes the solution 100 times faster than standard numerical approaches. In addition, the PGD solution has a low storage cost, providing interesting development of parametric solutions for real-time applications of energy management in buildings.

[1]  M. F. Zedan,et al.  Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model , 2005 .

[2]  C. Allery,et al.  Proper general decomposition (PGD) for the resolution of Navier-Stokes equations , 2011, J. Comput. Phys..

[3]  William W. Clark,et al.  Configuring wall layers for improved insulation performance , 2013 .

[4]  P. Ladevèze,et al.  Sur une famille d'algorithmes en mécanique des structures , 1985 .

[5]  Pascal Henry Biwole,et al.  Building envelope with a new aerogel-based insulating rendering: Experimental and numerical study, cost analysis, and thickness optimization , 2015 .

[6]  Shengwei Wang,et al.  Optimal simplified thermal models of building envelope based on frequency domain regression using genetic algorithm , 2007 .

[7]  Nathan Mendes,et al.  Review of Reduced Order Models for Heat and Moisture Transfer in Building Physics with Emphasis in PGD Approaches , 2017 .

[8]  Monika Woloszyn,et al.  Proper Generalised Decomposition for heat and moisture multizone modelling , 2015 .

[9]  Laure Itard,et al.  Energy performance and comfort in residential buildings: Sensitivity for building parameters and occupancy , 2015 .

[10]  S. A. Al-Sanea,et al.  Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass , 2011 .

[11]  F. Chinesta,et al.  A Short Review in Model Order Reduction Based on Proper Generalized Decomposition , 2018 .

[12]  Mohamed El Mankibi,et al.  Numerical estimation of time lags and decrement factors for wall complexes including Multilayer Thermal Insulation, in two different climatic zones , 2012 .

[13]  E. Cueto,et al.  Proper Generalized Decomposition based dynamic data driven inverse identification , 2012, Math. Comput. Simul..

[14]  Elías Cueto,et al.  Proper generalized decomposition of multiscale models , 2010 .

[15]  Hassam ur Rehman.  Experimental performance evaluation of solid concrete and dry insulation materials for passive buildings in hot and humid climatic conditions , 2017 .

[16]  Refrigerating.  ASHRAE handbook and product directory /published by the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc , 1977 .

[17]  Francisco Chinesta,et al.  Circumventing Curse of Dimensionality in the Solution of Highly Multidimensional Models Encountered in Quantum Mechanics Using Meshfree Finite Sums Decomposition , 2008 .

[18]  A. Ammar,et al.  PGD-Based Computational Vademecum for Efficient Design, Optimization and Control , 2013, Archives of Computational Methods in Engineering.

[19]  Katerina Tsikaloudaki,et al.  The influence of concrete density and conductivity on walls’ thermal inertia parameters under a variety of masonry and insulation placements , 2013 .

[20]  Adrien Leygue,et al.  The Proper Generalized Decomposition for Advanced Numerical Simulations: A Primer , 2013 .

[21]  Niccolò Aste,et al.  The influence of the external walls thermal inertia on the energy performance of well insulated buildings , 2009 .

[22]  Francisco Chinesta,et al.  A new family of solvers for some classes of multidimensional partial differential equations encountered in kinetic theory modelling of complex fluids - Part II: Transient simulation using space-time separated representations , 2007 .

[23]  Naouel Daouas,et al.  Impact of external longwave radiation on optimum insulation thickness in Tunisian building roofs based on a dynamic analytical model , 2016 .

[24]  Nuri Alpay Kürekci,et al.  Determination of optimum insulation thickness for building walls by using heating and cooling degree-day values of all Turkey’s provincial centers , 2016 .

[25]  Francisco Chinesta,et al.  On the deterministic solution of multidimensional parametric models using the Proper Generalized Decomposition , 2010, Math. Comput. Simul..

[26]  Naouel Daouas,et al.  A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads , 2011 .

[27]  Jihui Yuan,et al.  Proposal for optimum combination of reflectivity and insulation thickness of building exterior walls for annual thermal load in Japan , 2016 .

[28]  F. Chinesta,et al.  Advanced simulation of models defined in plate geometries: 3D solutions with 2D computational complexity , 2012 .

[29]  Meral Ozel,et al.  Effect of wall orientation on the optimum insulation thickness by using a dynamic method , 2011 .

[30]  Elías Cueto,et al.  Proper generalized decomposition of time‐multiscale models , 2012 .

[31]  S. A. Al-Sanea,et al.  Effect of thermal bridges on transmission loads and thermal resistance of building walls under dynamic conditions , 2012 .

[32]  Francisco Chinesta,et al.  Non-incremental transient solution of the Rayleigh–Bénard convection model by using the PGD , 2013 .

[33]  John Gelegenis,et al.  Optimum insulation thickness for external walls on different orientations considering the speed and direction of the wind , 2014 .

[34]  Monika Woloszyn,et al.  Tools for performance simulation of heat, air and moisture conditions of whole buildings , 2008 .

[35]  Pierre Michel,et al.  Experimental assessment of thermal inertia in insulated and non-insulated old limestone buildings , 2014 .

[36]  Christian Inard,et al.  Fast method to predict building heating demand based on the design of experiments , 2009 .

[37]  Anthony Nouy,et al.  Generalized spectral decomposition for stochastic nonlinear problems , 2009, J. Comput. Phys..