A 'design for energy minimization' approach to reduce energy consumption during the manufacturing phase
暂无分享,去创建一个
Shahin Rahimifard | Yingying Seow | Elliot Woolley | Nicholas J. Goffin | S. Rahimifard | E. Woolley | N. Goffin | Yingying Seow
[1] R. Slade,et al. Uncertainty in the availability of natural resources: Fossil fuels, critical metals and biomass , 2015 .
[2] Tim Herzog. World Greenhouse Gas Emissions in 2005 , 2009 .
[3] Srikanth Devanathan,et al. Integration of Sustainability Into Early Design Through the Function Impact Matrix , 2010 .
[4] Deborah L Thurston,et al. Trade‐off Modeling for Product and Manufacturing Process Design for the Environment , 1998 .
[5] Wim Dewulf,et al. Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 2: case studies , 2012, The International Journal of Life Cycle Assessment.
[6] Wim Dewulf,et al. Parametric Eco-Efficiency Analysis: A DfE Support Tool , 2002 .
[7] Shozo Takata,et al. Reconfiguration management of remanufactured products for responding to varied user needs , 2012 .
[8] Fabio Giudice,et al. Product design for the environment , 2006 .
[9] Eujin Pei,et al. Building a common language of design representations for industrial designers and engineering designers , 2009 .
[10] Hongxing Yang,et al. Review on life cycle assessment of energy payback and greenhouse gas emission of solar photovoltaic systems , 2013 .
[11] Wim Dewulf,et al. Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) Part 1: Methodology Description , 2011 .
[12] Emad Roghanian,et al. A framework for sustainable product design: a hybrid fuzzy approach based on Quality Function Deployment for Environment , 2015 .
[13] Wim Dewulf,et al. Eco-Impact Anticipation by Parametric Screening of Machine System Components , 2004 .
[14] David Jason Gerber,et al. Evolutionary energy performance feedback for design: Multidisciplinary design optimization and performance boundaries for design decision support , 2014 .
[15] Stuart Pugh,et al. Total Design: Integrated Methods for Successful Product Engineering , 1991 .
[16] Athulan Vijayaraghavan,et al. Automated energy monitoring of machine tools , 2010 .
[17] Dimitrios I. Gerogiorgis,et al. Process modelling and simulation for continuous pharmaceutical manufacturing of ibuprofen , 2015 .
[18] M. Hauschild,et al. Methodology for systematic analysis and improvement of manufacturing unit process life-cycle inventory (UPLCI)—CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: Methodology description , 2011, The International Journal of Life Cycle Assessment.
[19] Mohammed A. Omar,et al. Life cycle assessment-based selection for a sustainable lightweight body-in-white design , 2012 .
[20] Ali H. Dogru,et al. Systematic Component-Oriented development with Axiomatic Design , 2008, J. Syst. Softw..
[21] Ralph Evins,et al. Multi-level optimization of building design, energy system sizing and operation , 2015 .
[22] Shahin Rahimifard,et al. Minimising Embodied Product Energy to support energy efficient manufacturing , 2010 .
[23] Guo Q. Huang,et al. Design for X : concurrent engineering imperatives , 1996 .
[24] Kevin Otto,et al. Product Design: Techniques in Reverse Engineering and New Product Development , 2000 .
[25] K.K.B. Hon,et al. Performance evaluation of DFE tools , 2010 .
[26] Willie Hammer,et al. Product Safety Management And Engineering , 1993 .
[27] Hua Li,et al. An energy factor based systematic approach to energy-saving product design , 2010 .
[28] Genichii Taguchi,et al. Introduction to quality engineering. designing quality into products a , 1986 .
[29] Shahin Rahimifard,et al. Improving Product Design based on Energy Considerations , 2011 .
[30] 田口 玄一,et al. Introduction to quality engineering : designing quality into products and processes , 1986 .
[31] T. Roche,et al. The Design for Environmental Compliance Workbench Tool , 2004 .
[32] Martin Belusko,et al. Minimising the life cycle energy of buildings: Review and analysis , 2014 .
[33] S.M.M. Joosten,et al. Applying the V Model and Axiomatic Design in the Domain of IT Architecture Practice , 2015 .
[34] Samuel H. Huang,et al. Design for manufacture and design for `X`: concepts, applications, and perspectives , 2001 .
[35] Gregg Tong,et al. Design and the Environment , 1994 .
[36] Sergio Mussati,et al. A discrete and continuous mathematical model for the optimal synthesis and design of dual pressure heat recovery steam generators coupled to two steam turbines , 2016 .
[37] S. Vinodh,et al. Integration of ECQFD and LCA for sustainable product design , 2010 .
[38] Björn Johansson,et al. Environmental aspects in manufacturing system modelling and simulation—State of the art and research perspectives , 2013 .
[39] J. R. Tyrera. The use of holographic optics for heat flow control in wire-based laser cladding , 2015 .
[40] R. Heijungs,et al. Life-cycle assessment for energy analysis and management , 2007 .
[41] Miriam A. O'Shea. Design for Environment in conceptual product design – a decision model to reflect environmental issues of all life-cycle phases , 2002 .
[42] S. Kara,et al. Electricity Metering and Monitoring in Manufacturing Systems , 2011 .
[43] Christoph Herrmann,et al. Glocalized Solutions for Sustainability in Manufacturing , 2011 .