Feasibility studies for a bionic propulsion system of a blimp based on dielectric elastomers

After having successfully integrated Dielectric Elastomers (DE) in a cross tail for flight control, a novel biologically inspired propulsion system based on DE is envisaged. The basic idea is to mimic a fish body motion by deforming a) the envelope of the rear lifting body and b) flapping an aft-tail. In both cases, planar DEs are used, either fully integrated in the envelope (for a) and/or arranged as an active hinge (for b). In a theoretical study the specifications of a steady-state horizontal indoor flight of 1 m/s were defined. In an experimental work the concept of an active hull element, which consists of a balloon hull material and several layers of DE actuators was verified. The specific boundary conditions of a slightly pressurized elliptical membrane body were simulated in a biaxial test. It could be shown, that the necessary active strains to reach the specified body deformations were reached. In a second study an aero-elastic fin was designed. Based on fluid-dynamic similarity principles the size, shape and stiffness of the fin were determined and tested in preliminary flight test with a three meter long blimp. The main goal of 1 m/s flight velocity could be shown.

[1]  C. A. Pell,et al.  Mechanical control of swimming speed: stiffness and axial wave form in undulating fish models , 1995, The Journal of experimental biology.

[2]  G. Kovács,et al.  Design and characterization of an active hinge segment based on soft dielectric EAPs , 2008 .

[3]  Michael Sfakiotakis,et al.  Review of fish swimming modes for aquatic locomotion , 1999 .

[4]  M. Triantafyllou,et al.  Hydrodynamics of Fishlike Swimming , 2000 .

[5]  Paul W. Webb,et al.  Is the high cost of body/caudal fin undulatory swimming due to increased friction drag or inertial recoil? , 1992 .

[6]  Yoseph Bar-Cohen,et al.  Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, Second Edition , 2004 .

[7]  Lochmatter Patrick,et al.  Characterization of dielectric elastomer actuators based on a hyperelastic film model , 2007 .

[8]  P. Koumoutsakos,et al.  Simulations of optimized anguilliform swimming , 2006, Journal of Experimental Biology.

[9]  Paolo Ermanni,et al.  Design and characterization of shell-like actuators based on soft dielectric electroactive polymers , 2007 .

[10]  C. Mattheck,et al.  Bionik. Grundlagen und Beispiele für Ingenieure und Naturwissenschaftler. Von Werner Nachtigall, 315 S., Abbildungen, DM 98,‐. Springer Verlag, Heidelberg, 1998 , 1999 .

[11]  P.R. Bandyopadhyay,et al.  Trends in biorobotic autonomous undersea vehicles , 2005, IEEE Journal of Oceanic Engineering.

[12]  M. Triantafyllou,et al.  Oscillating foils of high propulsive efficiency , 1998, Journal of Fluid Mechanics.

[13]  G. Lauder,et al.  Passive and Active Flow Control by Swimming Fishes and Mammals , 2006 .

[14]  Yoseph Bar-Cohen,et al.  Biologically inspired intelligent robots , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.