Implementation of nitrogen-doped titanium-tungsten tunable heater in phase change random access memory and its effects on device performance

Nitrogen-doped titanium-tungsten (N-TiW) was proposed as a tunable heater in Phase Change Random Access Memory (PCRAM). By tuning N-TiW's material properties through doping, the heater can be tailored to optimize the access speed and programming current of PCRAM. Experiments reveal that N-TiW's resistivity increases and thermal conductivity decreases with increasing nitrogen-doping ratio, and N-TiW devices displayed (∼33% to ∼55%) reduced programming currents. However, there is a tradeoff between the current and speed for heater-based PCRAM. Analysis of devices with different N-TiW heaters shows that N-TiW doping levels could be optimized to enable low RESET currents and fast access speeds.

[1]  Mehdi Asheghi,et al.  Impact of thermoelectric phenomena on phase-change memory performance metrics and scaling , 2012, Nanotechnology.

[2]  Weijie Wang,et al.  Enabling Universal Memory by Overcoming the Contradictory Speed and Stability Nature of Phase-Change Materials , 2012, Scientific Reports.

[3]  F. Xiong,et al.  Low-Power Switching of Phase-Change Materials with Carbon Nanotube Electrodes , 2011, Science.

[4]  Weijie Wang,et al.  Superlatticelike dielectric as a thermal insulator for phase-change random access memory , 2010 .

[5]  Luping P. Shi,et al.  Dependence of the properties of phase change random access memory on nitrogen doping concentration in Ge2Sb2Te5 , 2010 .

[6]  Xing Zhang,et al.  Prediction of size effect on thermal conductivity of nanoscale metallic films , 2009 .

[7]  K. Goodson,et al.  The Impact of Thermal Boundary Resistance in Phase-Change Memory Devices , 2008, IEEE Electron Device Letters.

[8]  Bomy Chen,et al.  Phase change memory cell using tungsten trioxide bottom heating layer , 2008 .

[9]  D. Ielmini,et al.  Modeling of Programming and Read Performance in Phase-Change Memories—Part I: Cell Optimization and Scaling , 2008, IEEE Transactions on Electron Devices.

[10]  M. Wuttig,et al.  Phase-change materials for rewriteable data storage. , 2007, Nature materials.

[11]  Sung-Min Yoon,et al.  Low power and high speed phase-change memory devices with silicon-germanium heating layers , 2007 .

[12]  T. Chin,et al.  Highly electrical resistive SiTiNx heating layers and diffusion barriers for PCRAM , 2006 .

[13]  A. Pirovano,et al.  Electronic switching in phase-change memories , 2004, IEEE Transactions on Electron Devices.

[14]  J. F. Webb,et al.  One-dimensional heat conduction model for an electrical phase change random access memory device with an 8F2 memory cell (F=0.15 μm) , 2003 .

[15]  C. Wiemer,et al.  Single-phase polycrystalline Ti1−xWxN alloys (0⩽x⩽0.7) grown by UHV reactive magnetron sputtering: microstructure and physical properties , 1994 .

[16]  I. V. Mitchell,et al.  Studies of the Ti-W/Au metallization on aluminum , 1978 .

[17]  R. Wolters,et al.  On the microstructure-property relationship of WTi(N) diffusion barriers , 1990 .

[18]  K. L. Chopra,et al.  Thermal conductivity of copper films , 1974 .