A 3D optimization algorithm for sustainable cutting of slabs from ornamental stone blocks

[1]  Yoonho Song,et al.  Finding the strike direction of fractures using GPR , 2001 .

[2]  Olivier Devillers,et al.  Fast and Robust Triangle-Triangle Overlap Test Using Orientation Predicates , 2003, J. Graphics, GPU, & Game Tools.

[3]  M. Lualdi,et al.  2D and 3D experiments to explore the potential benefit of GPR investigations in planning the mining activity of a limestone quarry , 2004, Proceedings of the Tenth International Conference on Grounds Penetrating Radar, 2004. GPR 2004..

[4]  Seong-Jun Cho,et al.  Integrated Application of Borehole Radar Reflection and Resistivity Tomography to Delineate Fractures at a Granite Quarry , 2004, Proceedings of the Tenth International Conference on Grounds Penetrating Radar, 2004. GPR 2004..

[5]  R. Weger,et al.  Three-dimensional ground-penetrating radar imaging of sedimentary structures, fractures, and archaeological features at submeter resolution , 2004 .

[6]  M. Mutlutürk Determining the amount of marketable blocks of dimensional stone before actual extraction , 2007 .

[7]  Jorge M. F. Carvalho,et al.  Decision criteria for the exploration of ornamental-stone deposits: Application to the marbles of the Portuguese Estremoz Anticline , 2008 .

[8]  Alparslan Turanboy,et al.  LIP-RM: an attempt at 3D visualization of in situ rock mass structures , 2008 .

[9]  Erkan Ülker,et al.  Maximum volume cuboids for arbitrarily shaped in-situ rock blocks as determined by discontinuity analysis - A genetic algorithm approach , 2009, Comput. Geosci..

[10]  Alparslan Turanboy,et al.  A geometric approach for natural rock blocks in engineering structures , 2010 .

[11]  N. Careddu,et al.  Potential applications of waste material deriving from marble processing plants , 2010 .

[12]  Nicola Careddu,et al.  Promoting ecological sustainable planning for natural stone quarrying. The case of the Orosei Marble Producing Area in Eastern Sardinia , 2011 .

[13]  Siegfried Siegesmund,et al.  Optimized extraction of dimension stone blocks , 2011 .

[14]  Ivo Galić,et al.  The profitability of dimension stone deposit exploitation in relation to the coefficient of utilization , 2012 .

[15]  D. Arosio,et al.  Quality control of stone blocks during quarrying activities , 2012, 2012 14th International Conference on Ground Penetrating Radar (GPR).

[16]  Leandro R. Alejano,et al.  Geometrical design of ornamental stone slabs cutting using the neutral region concept , 2012 .

[17]  S. Siegesmund,et al.  Granitic dimensional stones in Uruguay: evaluation and assessment of potential resources , 2013, Environmental Earth Sciences.

[18]  Michael Galetakis,et al.  Evaluation of fine limestone quarry by-products, for the production of building elements – An experimental approach , 2012 .

[19]  M. Inmaculada Alvarez-Fernandez,et al.  A computational algorithm for rock cutting optimisation from primary blocks , 2013 .

[20]  Nicola Careddu,et al.  From landfill to water, land and life: The creation of the Centre for stone materials aimed at secondary processing , 2013 .

[21]  Kasthurirangan Gopalakrishnan,et al.  Prediction of specific cutting energy in natural stone cutting processes using the neuro-fuzzy methodology , 2014 .

[22]  E. Bakhoum,et al.  RE-USE OF GRANITE SLUDGE IN PRODUCING GREEN CONCRETE , 2014 .

[23]  Reza Kakaie,et al.  Development of 2D computer program to determine geometry of rock mass blocks , 2014 .

[24]  J. Rey,et al.  Ground-penetrating radar method used for the characterisation of ornamental stone quarries , 2015 .

[25]  O. Selonen,et al.  Assessment of Potential Natural Stone Deposits , 2015 .

[26]  F. Kruse,et al.  The use of ground penetrating radar (GPR) in the investigation of historical quarry abandonment in Svalbard , 2016, Polar Record.

[27]  D. Arosio Rock fracture characterization with GPR by means of deterministic deconvolution , 2016 .

[28]  Michael Galetakis,et al.  A review on the utilisation of quarry and ornamental stone industry fine by-products in the construction sector , 2016 .

[29]  R. Bruno,et al.  Application of low frequency georadar antenna to fractures detection and 3D visualization in a new quarry bench , 2016 .

[30]  M. Lokeshwari,et al.  Eco-Friendly use of Granite Fines Waste in Building Blocks , 2016 .

[31]  Roberto Bruno,et al.  MAPPING AND MODELLING FRACTURES USING GROUND PENETRATING RADAR FOR ORNAMENTAL STONE ASSESSMENT AND RECOVERY OPTIMIZATION: TWO CASE STUDIES , 2017 .

[32]  Roberto Bruno,et al.  Deterministic Three-dimensional Rock Mass Fracture Modeling from Geo-radar Survey: a Case Study in a Sandstone Quarry in Italy , 2017 .

[33]  Francisco J. Cañadas-Quesada,et al.  Utilization of Integrated Geophysical Techniques to Delineate the Extraction of Mining Bench of Ornamental Rocks (Marble) , 2017, Remote. Sens..

[34]  Dione Macedo,et al.  Sustainability strategies for dimension stones industry based on Northwest region of Espírito Santo State, Brazil , 2017 .

[35]  A. Azadi,et al.  GPR measurements to detect major discontinuities at Cheshmeh-Shirdoosh limestone quarry, Iran , 2019, Bulletin of Engineering Geology and the Environment.

[36]  Roberto Bruno,et al.  A Combination of GPR Survey and Laboratory Rock Tests for Evaluating an Ornamental Stone Deposit in a Quarry Bench , 2017 .

[37]  J. Rey,et al.  Characterization of the sedimentary fabrics in ornamental rocks by using GPR , 2017 .

[38]  N. Careddu,et al.  Sustainable reuse of marble sludge in tyre mixtures , 2017, Resources Policy.

[39]  Aydin Shaterpour-Mamaghani,et al.  Estimating the sawability of large diameter circular saws based on classification of natural stone types according to the geological origin , 2018 .

[40]  A. Cavallo Serpentinitic waste materials from the dimension stone industry: Characterization, possible reuses and critical issues , 2018, Resources Policy.

[41]  Roberto Bruno,et al.  Implementation of a Fracture Modeling Strategy Based on Georadar Survey in a Large Area of Limestone Quarry Bench , 2018, Geosciences.

[42]  Raheb Bagherpour,et al.  Discontinuity modelling and rock block geometry identification to optimize production in dimension stone quarries , 2018 .

[43]  António Mateus,et al.  Planning the future exploitation of ornamental stones in Portugal using a weighed multi-dimensional approach , 2018, Resources Policy.

[44]  Reza Mikaeil,et al.  Utilization of Soft Computing for Evaluating the Performance of Stone Sawing Machines, Iranian Quarries , 2018 .

[45]  Roberto Bruno,et al.  3D modeling of discontinuities using GPR in a commercial size ornamental limestone block , 2018 .

[46]  Nicola Careddu,et al.  Dimension stones in the circular economy world , 2019, Resources Policy.