Comparison of ultrasonic-treated rice husk carbon with the conventional carbon black towards improved mechanical properties of their EPDM composites

[1]  A. Marzec,et al.  Silane Treatment as an Effective Way of Improving the Reinforcing Activity of Carbon Nanofibers in Nitrile Rubber Composites , 2020, Materials.

[2]  N. Grisdanurak,et al.  Insight into the ultrasonication of graphene oxide with strong changes in its properties and performance for adsorption applications , 2019, Chemical Engineering Journal.

[3]  Zuhua Zhang,et al.  Investigation of the waterproof property of alkali-activated metakaolin geopolymer added with rice husk ash , 2019, Journal of Cleaner Production.

[4]  Muhammad Raheel,et al.  Extraction of valuable chemicals from sustainable rice husk waste using ultrasonic assisted ionic liquids technology , 2019, Journal of Cleaner Production.

[5]  H. Szymanowski,et al.  Low-temperature plasma modification of carbon nanofillers for improved performance of advanced rubber composites , 2019, Polymer Bulletin.

[6]  J. Oh,et al.  Effects of ultrasonic surface treatment on rice husk carbon , 2019, Carbon Letters.

[7]  P. Maji,et al.  Structural/Load-Bearing Characteristics of Polymer–Carbon Composites , 2018, Springer Series on Polymer and Composite Materials.

[8]  R. Noguchi,et al.  Eluted Soluble Silica Content in Rice Husk Charcoal Produced by Rice Husk Burner , 2017 .

[9]  Y. Lai,et al.  Rice husk‐derived porous carbon/silica particles as green filler for electronic package application , 2017 .

[10]  Hong Wu,et al.  Improvement of hardness and compression set properties of EPDM seals with alternating multilayered structure for PEM fuel cells , 2016 .

[11]  A. Bansal,et al.  Renewable waste rice husk grafted oxo-vanadium catalyst for oxidation of tertiary amines to N-oxides , 2016 .

[12]  Wenli Zhang,et al.  A green technology for the preparation of high capacitance rice husk-based activated carbon , 2016 .

[13]  R. Pode.  Potential applications of rice husk ash waste from rice husk biomass power plant , 2016 .

[14]  Y. Qiu,et al.  Green Composite Materials , 2015 .

[15]  Y. Qiu,et al.  Green composite materials [Editorial] , 2015 .

[16]  Yinhang Zhang,et al.  Mechanical, thermal and friction properties of rice bran carbon/nitrile rubber composites: Influence of particle size and loading , 2014 .

[17]  Richard C.M. Yam,et al.  A cleaner production of rice husk-blended polypropylene eco-composite by gas-assisted injection moulding , 2014 .

[18]  Liqun Zhang,et al.  Morphology, interfacial interaction, and properties of a novel bioelastomer reinforced by silica and carbon black , 2013 .

[19]  Patrick Ehi Imoisili,et al.  Mechanical Properties of Rice Husk /Carbon Black Hybrid Natural Rubber Composite , 2013 .

[20]  Wei Gao,et al.  Simultaneous preparation of silica and activated carbon from rice husk ash , 2012 .

[21]  Lili Wang,et al.  Application studies of activated carbon derived from rice husks produced by chemical-thermal process--a review. , 2011, Advances in colloid and interface science.

[22]  M. S. Saini,et al.  Rice husk as reinforcing filler in polypropylene composites , 2010 .

[23]  C. Das,et al.  Effect of fillers on natural rubber/high styrene rubber blends with nano silica: Morphology and wear , 2010 .

[24]  W. Dierkes,et al.  The relationship between crosslink system, network structure and material properties of carbon black reinforced EPDM , 2009 .

[25]  M. R. Bayoumi,et al.  Effect of carbon black loading on the swelling and compression set behavior of SBR and NBR rubber compounds , 2009 .

[26]  A. Isayev,et al.  Comparative Study of Silica-, Nanoclay-and Carbon Black-Filled EPDM Rubbers , 2008 .

[27]  M. Morris,et al.  Effect of Fumed Silica Surface Area on Silicone Rubber Reinforcement , 2008 .

[28]  C. Hong,et al.  Effects of particle size and structure of carbon blacks on the abrasion of filled elastomer compounds , 2007 .

[29]  Alain Dufresne,et al.  Short natural-fibre reinforced polyethylene and natural rubber composites: Effect of silane coupling agents and fibres loading , 2007 .

[30]  Nittaya Rattanasom,et al.  Reinforcement of natural rubber with silica/carbon black hybrid filler , 2007 .

[31]  P. Sae-oui,et al.  Dependence of mechanical and aging properties of chloroprene rubber on silica and ethylene thiourea loadings , 2007 .

[32]  P. Sae-oui,et al.  Effect of curing system on reinforcing efficiency of silane coupling agent , 2004 .

[33]  Sung‐Seen Choi,et al.  Influence of filler type and content on properties of styrene-butadiene rubber (SBR) compound reinforced with carbon black or silica , 2004 .

[34]  C. Nah,et al.  Improvement of properties of silica‐filled styrene‐butadiene rubber (SBR) compounds using acrylonitrile‐styrene‐butadiene rubber (NSBR) , 2003 .

[35]  M. Arroyo,et al.  Organo-montmorillonite as substitute of carbon black in natural rubber compounds , 2003 .

[36]  A. Bhowmick,et al.  Utilization of powdered EPDM scrap in EPDM compound , 2003 .

[37]  U. Yilmazer,et al.  Some microwave and mechanical properties of carbon fiber-polypropylene and carbon black-polypropylene composites , 1996 .

[38]  J. Donnet,et al.  Filler—Elastomer Interactions. Part III. Carbon-Black-Surface Energies and Interactions with Elastomer Analogs , 1991 .

[39]  M. Nasir,et al.  Cure characteristics and mechanical properties of carbon black filled styrene-butadiene rubber and epoxidized natural rubber blends , 1989 .