A new passive non-linear damper for automobiles

Abstract Passive linear suspension systems are limited in their ability to improve ride characteristics owing to the conflicting interdependence between ride comfort, road holding, and space occupied by the suspension system. Non-linear systems can improve the performance of passive designs by de-linking the various metrics involved in ride comfort. Based on the control strategies used in semi-active suspensions, a new non-linear damper design is proposed, where the damping rapidly changes with stroke. This design has been fabricated and tested to validate the analytical expressions governing the damping as a function of stroke. Experimental results show excellent agreement with analytical expressions. The novel damper model has been used along with an existing non-linear spring design, in a quarter-car simulation. The results indicate that the non-linear design leads to significantly lower acceleration levels when compared with a linear system, without any compromise on other metrics.

[1]  R S Sharp,et al.  On car steering torques at parking speeds , 2003 .

[2]  Daniel Álvarez Mántaras,et al.  Ride comfort performance of different active suspension systems , 2006 .

[3]  Jan A. Snyman,et al.  Optimisation of road vehicle passive suspension systems. Part 2. Qualification and case study , 2003 .

[4]  T. S. Sankar,et al.  Random response analysis of a non-linear vehicle suspension with tunable shock absorbers , 1992 .

[5]  Anil Shirahatt,et al.  Optimal Design of Passenger Car Suspension for Ride and Road , 2008 .

[6]  Robin S. Sharp,et al.  An Evaluation of Passive Automotive Suspension Systems with Variable Stiffness and Damping Parameters , 1986 .

[7]  D. Ryba.  Improvement in Dynamic Characteristics of Automobile Suspension Systems Part II - Three-Mass System , 1974 .

[8]  Mehrdad Nouri Khajavi,et al.  Comparison between Optimized Passive Vehicle Suspension System and Semi Active Fuzzy Logic Controlled Suspension System Regarding Ride and Handling , 2007 .

[9]  Manuel Paredes,et al.  Analytical Behavior Law for a Constant Pitch Conical Compression Spring , 2006 .

[10]  R S Sharp,et al.  On the construction of a general numerical tyre shear force model from limited data , 2003 .

[11]  Abdulaziz M. El-Tamimi,et al.  On a subclass of nonlinear passive and semi-active damping for vibration isolation , 1990 .

[12]  D. Ryba.  Possible Improvements in Ride Comfort , 1973 .

[13]  R S Sharp,et al.  Performance and Design Considerations for Dissipative Semi-Active Suspension Systems for Automobiles , 1987 .

[14]  R S Sharp,et al.  The Relative Performance Capabilities of Passive, Active and Semi-Active Car Suspension Systems , 1986 .

[15]  Dean Karnopp,et al.  ACTIVE DAMPING IN ROAD VEHICLE SUSPENSION SYSTEMS , 1983 .