Adaptive tool-path generation of rapid prototyping for complex product models

Abstract Rapid prototyping (RP) provides an effective method for model verification and product development collaboration. A challenging research issue in RP is how to shorten the build time and improve the surface accuracy especially for complex product models. In this paper, systematic adaptive algorithms and strategies have been developed to address the challenge. A slicing algorithm has been first developed for directly slicing a Computer-Aided Design (CAD) model as a number of RP layers. Closed Non-Uniform Rational B-Spline (NURBS) curves have been introduced to represent the contours of the layers to maintain the surface accuracy of the CAD model. Based on it, a mixed and adaptive tool-path generation algorithm, which is aimed to optimize both the surface quality and fabrication efficiency in RP, has been then developed. The algorithm can generate contour tool-paths for the boundary of each RP sliced layer to reduce the surface errors of the model, and zigzag tool-paths for the internal area of the layer to speed up fabrication. In addition, based on developed build time analysis mathematical models, adaptive strategies have been devised to generate variable speeds for contour tool-paths to address the geometric characteristics in each layer to reduce build time, and to identify the best slope degree of zigzag tool-paths to further minimize the build time. In the end, case studies of complex product models have been used to validate and showcase the performance of the developed algorithms in terms of processing effectiveness and surface accuracy.

[1]  Han Tong Loh,et al.  Equidistant path generation for improving scanning efficiency in layered manufacturing , 2002 .

[2]  Paul K. Wright,et al.  Toolpath optimization for minimizing airtime during machining , 2003 .

[3]  Xiao Chen,et al.  Direct Slicing from PowerSHAPE Models for Rapid Prototyping , 2001 .

[4]  Mohsen A. Jafari,et al.  Process speeding up via deposition planning in fused deposition‐based layered manufacturing processes , 2003 .

[5]  Yusheng Shi,et al.  Application software system based on direct slicing for rapid prototyping , 2004 .

[6]  Debasish Dutta,et al.  A review of process planning techniques in layered manufacturing , 2000 .

[7]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[8]  Frank W. Liou,et al.  Process planning strategies for solid freeform fabrication of metal parts , 2008 .

[9]  Paul A. Sullivan,et al.  Predicting total build‐time and the resultant cure depth of the 3D stereolithography process , 1996 .

[10]  Pisut Koomsap,et al.  Recommended slicing positions for adaptive direct slicing by image processing technique , 2010 .

[11]  Bingheng Lu,et al.  Integrating cross-sectional imaging based reverse engineering with rapid prototyping , 2006, Comput. Ind..

[12]  Weiyin Ma,et al.  NURBS-based adaptive slicing for efficient rapid prototyping , 2004, Comput. Aided Des..

[13]  Selçuk Güçeri,et al.  Domain Decomposition and Space Filling Curves in Toolpath Planning and Generation , 1998 .

[14]  YingLiang Ma,et al.  Point inversion and projection for NURBS curve and surface: Control polygon approach , 2003, Comput. Aided Geom. Des..

[15]  Radovan Kovacevic,et al.  Automated torch path planning using polygon subdivision for solid freeform fabrication based on welding , 2004 .

[16]  Ajay Joneja,et al.  Tool path optimization in layered manufacturing , 2002 .

[17]  Jan Helge Bøhn,et al.  Accurate exterior, fast interior layered manufacturing , 1997 .

[18]  Paul K. Wright,et al.  Zig-Zag Tool Path Generation for Sculptured Surface Finishing , 2003, Geometric and Algorithmic Aspects of Computer-Aided Design and Manufacturing.