Interconnection capacitances and inductances on oxide-passivated silicon, sapphire, and semi-insulating gallium arsenide substrates were calculated and compared. The results showed that, including coupling effects, the capacitances on insulating substrates are lower only at large Iinewidths, but become comparable to values on silicon substrates at linewidths below 2.5 /spl mu/m. The frequency-dependent nature of inductances on silicon substrates was reviewed. The results indicated that, at frequencies where most digital integrated circuits operate, silicon substrates can be treated as a lossless medium. Hence, inductances on silicon substrates can be calculated by the same means as on insulating substrates. The propagation delay of an interconnection resulting from using different substrates was also evaluated. It can be shown that for VLSI development the choice of substrates is not nearly as critical as the problem of series resistance of an interconnection.
[1]
H. Hasegawa,et al.
Properties of Microstrip Line on Si-SiO/sub 2/ System
,
1971
.
[2]
R. P. Owens,et al.
Quasi-Static Characteristics of Microstrip on an Anisotropic Sapphire Substrate
,
1976
.
[3]
M. V. Schneider,et al.
Microstrip lines for microwave integrated circuits
,
1969
.
[4]
K. Maeguchi,et al.
A 7000-gate microprocessor on SOS-PULCE
,
1979,
IEEE Journal of Solid-State Circuits.
[5]
R. Neidert.
Dielectric constant of semi-insulating gallium arsenide
,
1980
.
[6]
E. Gowen,et al.
GaAs MESFET logic with 4-GHz clock rate
,
1977
.