Estimating vertical canopy cover using dense image-based point cloud data in four vegetation types in southern Sweden

ABSTRACT This study had the aim of investigating the utility of image-based point cloud data for estimation of vertical canopy cover (VCC). An accurate measure of VCC based on photogrammetric matching of aerial images would aid in vegetation mapping, especially in areas where aerial imagery is acquired regularly. The test area is located in southern Sweden and was divided into four vegetation types with sparse to dense tree cover: unmanaged coniferous forest; pasture areas with deciduous tree cover; wetland; and managed coniferous forest. Aerial imagery with a ground sample distance of 0.24 m was photogrammetrically matched to produce dense image-based point cloud data. Two different image matching software solutions were used and compared: MATCH-T DSM by Trimble and SURE by nFrames. The image-based point clouds were normalized using a digital terrain model derived from airborne laser scanner (ALS) data. The canopy cover metric vegetation ratio was derived from the image-based point clouds, as well as from raster-based canopy height models (CHMs) derived from the point clouds. Regression analysis was applied with vegetation ratio derived from near nadir ALS data as the dependent variable and metrics derived from image-based point cloud data as the independent variables. Among the different vegetation types, vegetation ratio derived from the image-based point cloud data generated by using MATCH-T resulted in relative root mean square errors (rRMSE) of VCC ranging from 6.1% to 29.3%. Vegetation ratio based on point clouds from SURE resulted in rRMSEs ranging from 7.3% to 37.9%. Use of the vegetation ratio based on CHMs generated from the image-based point clouds resulted in similar, yet slightly higher values of rRMSE.

[1]  Joanne C. White,et al.  Airborne laser scanning and digital stereo imagery measures of forest structure: comparative results and implications to forest mapping and inventory update , 2013 .

[2]  Zuyuan Wang,et al.  A novel method to assess short-term forest cover changes based on digital surface models from image-based point clouds , 2015 .

[3]  H. Hirschmüller.  Ieee Transactions on Pattern Analysis and Machine Intelligence 1 Stereo Processing by Semi-global Matching and Mutual Information , 2022 .

[4]  Björn Nilsson,et al.  National Inventory of Landscapes in Sweden (NILS)—scope, design, and experiences from establishing a multiscale biodiversity monitoring system , 2011, Environmental monitoring and assessment.

[5]  E. Baltsavias,et al.  Assessing changes of forest area and shrub encroachment in a mire ecosystem using digital surface models and CIR aerial images , 2008 .

[6]  Joanne C. White,et al.  Comparing ALS and Image-Based Point Cloud Metrics and Modelled Forest Inventory Attributes in a Complex Coastal Forest Environment , 2015 .

[7]  Juha Hyyppä,et al.  Performance of dense digital surface models based on image matching in the estimation of plot-level forest variables , 2013 .

[8]  M. Nilsson.  Estimation of tree heights and stand volume using an airborne lidar system , 1996 .

[9]  A. Montaghi.  Effect of scanning angle on vegetation metrics derived from a nationwide Airborne Laser Scanning acquisition , 2013 .

[10]  Johan Holmgren,et al.  Estimation of forest variables using airborne laser scanning , 2003 .

[11]  Martina L. Hobi,et al.  Countrywide Stereo-Image Matching for Updating Digital Surface Models in the Framework of the Swiss National Forest Inventory , 2015, Remote. Sens..

[12]  M. Rautiainen,et al.  Estimation of forest canopy cover: A comparison of field measurement techniques , 2006 .

[13]  Göran Ståhl,et al.  Manual for Aerial Photo Interpretation in the National Inventory of Landscapes in Sweden : NILS , 2003 .

[14]  Håkan Olsson,et al.  Estimation of crown coverage using airborne laser scanning , 2008 .

[15]  Björn Nilsson,et al.  Using Optical Satellite Data and Airborne Lidar Data for a Nationwide Sampling Survey , 2015, Remote. Sens..

[16]  M. Rothermel,et al.  SURE : PHOTOGRAMMETRIC SURFACE RECONSTRUCTION FROM IMAGER Y , 2013 .

[17]  Joanne C. White,et al.  The Utility of Image-Based Point Clouds for Forest Inventory: A Comparison with Airborne Laser Scanning , 2013 .

[18]  Zuyuan Wang,et al.  Wall-to-Wall Forest Mapping Based on Digital Surface Models from Image-Based Point Clouds and a NFI Forest Definition , 2015 .

[19]  Y. Hu,et al.  Mapping canopy height using a combination of digital stereo‐photogrammetry and lidar , 2008 .

[20]  Jonas Bohlin,et al.  Combining point clouds from image matching with SPOT 5 multispectral data for mountain vegetation classification , 2015 .

[21]  Sakari Tuominen,et al.  Forest variable estimation using a high-resolution digital surface model , 2012 .

[22]  Kerri T. Vierling,et al.  Assessing Biodiversity by Airborne Laser Scanning , 2014 .

[23]  Lars T. Waser,et al.  Potential of UltraCamX stereo images for estimating timber volume and basal area at the plot level in mixed European forests , 2013 .

[24]  Jörgen Wallerman,et al.  Forest variable estimation using photogrammetric matching of digital aerial images in combination with a high-resolution DEM , 2012 .

[25]  P. Axelsson.  DEM Generation from Laser Scanner Data Using Adaptive TIN Models , 2000 .

[26]  E. Næsset,et al.  Comparing biophysical forest characteristics estimated from photogrammetric matching of aerial images and airborne laser scanning data , 2015 .

[27]  D. Pitt,et al.  A Comparison of Point Clouds Derived from Stereo Imagery and Airborne Laser Scanning for the Area-Based Estimation of Forest Inventory Attributes in Boreal Ontario , 2014 .

[28]  G. Henebry,et al.  Remote sensing of vegetation 3-D structure for biodiversity and habitat: Review and implications for lidar and radar spaceborne missions , 2009 .

[29]  Timo Tokola,et al.  Tropical forest canopy cover estimation using satellite imagery and airborne lidar reference data , 2015 .

[30]  Emmanuel P. Baltsavias,et al.  A comparison between photogrammetry and laser scanning , 1999 .

[31]  C. Stepper,et al.  Using semi-global matching point clouds to estimate growing stock at the plot and stand levels: application for a broadleaf-dominated forest in central Europe , 2015 .

[32]  B. St-Onge,et al.  Characterizing the Height Structure and Composition of a Boreal Forest Using an Individual Tree Crown Approach Applied to Photogrammetric Point Clouds , 2015 .

[33]  Matti Maltamo,et al.  Airborne discrete-return LIDAR data in the estimation of vertical canopy cover, angular canopy closure and leaf area index , 2011 .

[34]  D. Sheil,et al.  Assessing forest canopies and understorey illumination: canopy closure, canopy cover and other measures , 1999 .

[35]  R Core Team,et al.  R: A language and environment for statistical computing. , 2014 .

[36]  Göran Ståhl,et al.  The contribution of trees outside forests to national tree biomass and carbon stocks—a comparative study across three continents , 2014, Environmental Monitoring and Assessment.

[37]  Peter Axelsson,et al.  Processing of laser scanner data-algorithms and applications , 1999 .

[38]  Janne Heiskanen,et al.  Modelling lidar-derived boreal forest canopy cover with SPOT 4 HRVIR data , 2013 .

[39]  J. Holmgren,et al.  The potential of digital surface models based on aerial images for automated vegetation mapping , 2015 .