Nano-assembled thin film gas sensors. IV. Mass-sensitive monitoring of humidity using quartz crystal microbalance (QCM) electrodes

Abstract Nano-assembled thin films prepared by a layer-by-layer approach on QCM resonators were used as sensitive elements for monitoring relative humidity. Different types of films, polymer-based (PDDA/PSS)n film and porphyrin-based (PDDA/TSPP)n and (PDDA/MnTSPP)n films (where n = 5, 10, and 15), showed linear responses to relative humidity changes in the range of 4–94%. Increase of the number of bilayers deposited on the QCM electrode enhanced the sensitivity to relative humidity. The porphyrin-based films showed ca. 4.5 times higher sensitivity towards relative humidity than the polymer-based films, owing to presence of the higher number of free sulfonic acid groups. Incorporation of the metal ion into the porphyrin pyrrole ring was not significant in sensitivity. However, all films showed a good reversibility to the stepwise changes of relative humidity and the response and recovery times (t90) were very fast within 15 s.

[1]  Izumi Ichinose,et al.  Alternate Molecular Layers of Metal Oxides and Hydroxyl Polymers Prepared by the Surface Sol‐Gel Process , 1998 .

[2]  William J. Batty,et al.  Fuzzy control strategies to provide cost and energy efficient high quality indoor environments in buildings with high occupant densities , 2003 .

[3]  Antonella Macagnano,et al.  Self-assembled monolayers of mercaptoporphyrins as sensing material for quartz crystal microbalance chemical sensors , 1998 .

[4]  Jianzhong Zhu,et al.  Humidity sensing properties of Pd2+-doped ZnO nanotetrapods , 2007 .

[5]  R. Iler,et al.  Multilayers of colloidal particles , 1966 .

[6]  L. Liu,et al.  Acidichromism and Supramolecular Chirality of Tetrakis(4-sulfonatophenyl)porphyrin in Organized Molecular Films , 2008 .

[7]  J. Ramsden,et al.  Determination of optical constants of molecular films assembled via alternate polyion adsorption , 1995 .

[8]  Jeremy J. Ramsden,et al.  Nano-assembled thin film gas sensors. I. Ammonia detection by a porphyrin-based multilayer film , 2002 .

[9]  Alan Townshend,et al.  Applications of piezoelectric quartz crystal microbalances , 1987 .

[10]  M. Penza,et al.  Relative humidity sensing by PVA-coated dual resonator SAW oscillator , 2000 .

[11]  Pietro Siciliano,et al.  Spin-coated thin films of metal porphyrin-phthalocyanine blend for an optochemical sensor of alcohol vapours , 2004 .

[12]  T. Kunitake,et al.  Layer-by-Layer Assembly of Aqueous Bilayer Membranes on Charged Surfaces. , 1996 .

[13]  Banshi D. Gupta,et al.  A novel probe for a fiber optic humidity sensor , 2001 .

[14]  F. Arregui,et al.  Sensitivity optimization of tapered optical fiber humidity sensors by means of tuning the thickness of nanostructured sensitive coatings , 2007 .

[15]  P. Su,et al.  Layer-by-layer assembly of mica and polyelectrolyte for use in low-humidity sensor , 2009 .

[16]  Izumi Ichinose,et al.  Molecular Imprinting of Azobenzene Carboxylic Acid on a TiO2 Ultrathin Film by the Surface Sol-Gel Process , 1998 .

[17]  Katsuhiko Ariga,et al.  Assembling Alternate Dye−Polyion Molecular Films by Electrostatic Layer-by-Layer Adsorption , 1997 .

[18]  H. Ache,et al.  An optochemical ammonia sensor based on immobilized metalloporpyrins , 1994 .

[19]  Noboru Yamazoe,et al.  Humidity sensors: Principles and applications , 1986 .

[20]  K. Ariga,et al.  Formation of Ultrathin Multilayer and Hydrated Gel from Montmorillonite and Linear Polycations. , 1996 .

[21]  Jérôme Courbat,et al.  Evaluation of pH indicator-based colorimetric films for ammonia detection using optical waveguides , 2009 .

[22]  Pedro M. Faia,et al.  Humidity sensing properties of a thick-film titania prepared by a slow spinning process , 2004 .

[23]  P. Su,et al.  Self-assembly of polyelectrolytic multilayer thin films of polyelectrolytes on quartz crystal microbalance for detecting low humidity , 2009 .

[24]  Desheng Jiang,et al.  Quartz crystal microbalance coated with carbon nanotube films used as humidity sensor , 2005 .

[25]  C. F. Klein,et al.  A model for the relative environmental stability of a series of polyimide capacitance humidity sensors , 1996 .

[26]  M. Vendrell,et al.  Self-assembly to ordered films of the homoassociate solutions of the tetrasodium salt of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin dihydrochloride , 2000 .

[27]  Francisco J. Arregui,et al.  Optical fiber sensing devices based on organic vapor indicators towards sensor array implementation , 2009 .

[28]  Roger Guilard,et al.  The porphyrin handbook , 2002 .

[29]  Brice Sorli,et al.  Quartz Crystal Microbalance (QCM) used as humidity sensor , 2000 .

[30]  P. Faia,et al.  AC impedance spectroscopy: a new equivalent circuit for titania thick film humidity sensors , 2005 .

[31]  K. Schug,et al.  Fiber optic sensor for simultaneous determination of atmospheric nitrogen dioxide, ozone, and relative humidity. , 2009, Analytical chemistry.