Influence of waxes on adhesion properties of bituminous binders

The benefits at the base of WMA technologies are well established in the literature. They include the reduction in the energy consumption during the production of mixtures, the reduction in the emissions to the atmosphere in the production plant and a safer working environment. Although many studies have demonstrated good performance of this technology overall, some aspects are still unclear. This paper aims to investigate the effects of two different waxes, mixed with a 70/100 pen bitumen on bitumen–aggregate adhesion. Physico-chemical surface characteristics of three different aggregates were assessed and combined with those of the bitumens by means of the Dynamic Contact Angle and Dynamic Vapour Sorption Devices. These techniques are an alternative to the procedure used to visually assess the bitumen–aggregate affinity, as given in the in EN 12697-11 standard, in which the materials are mixed together and then immersed in water. Using these procedures the materials are not mixed together, but studied separately, and the evaluation of their affinity for one another is analytically expressed by means of the work of adhesion. Results have shown that waxes adversely affect the affinity of bitumen with aggregates by differing amounts, depending on the wax type and on the acidic/basic type of the aggregate.

[1]  Dallas N. Little,et al.  Bitumen Surface Energy Characterization Using a Contact Angle Approach , 2006 .

[2]  David R. Large,et al.  Assessing asphalt mixture moisture susceptibility through intrinsic adhesion, bitumen stripping and mechanical damage , 2014 .

[3]  J S Miller,et al.  DISTRESS IDENTIFICATION MANUAL FOR THE LONG-TERM PAVEMENT PERFORMANCE PROGRAM (FOURTH REVISED EDITION) , 2003 .

[4]  Dallas N. Little,et al.  Adhesion in Bitumen-Aggregate Systems and Quantification of the Effects of Water on the Adhesive Bond , 2005 .

[5]  S. Siboni,et al.  Acid–base surface free energies of solids and the definition of scales in the Good–van Oss–Chaudhury theory , 2000 .

[6]  Valeria Vignali,et al.  Modeling the DSR complex shear modulus of asphalt binder using 3D discrete element approach , 2014 .

[7]  Christophe Petit,et al.  Experimental study on shear fatigue behavior and stiffness performance of Warm Mix Asphalt by adding synthetic wax , 2012, 1203.2734.

[8]  M. Chaudhury,et al.  Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems , 1988 .

[9]  Robert L. Lytton,et al.  INFLUENCE OF AGGREGATE CHEMISTRY ON THE ADSORPTION AND DESORPTION OF ASPHALT , 1992 .

[10]  Robert L. Lytton.  Characterizing Asphalt Pavements for Performance , 2000 .

[11]  Joel Oliveira,et al.  Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents , 2010 .

[12]  Amit Bhasin,et al.  Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water , 2007 .

[13]  T. Young.  III. An essay on the cohesion of fluids , 1805, Philosophical Transactions of the Royal Society of London.

[14]  Valeria Vignali,et al.  Numerical and experimental study of granular mixes for asphalts , 2012 .

[15]  Dallas N. Little,et al.  Using Surface Energy Measurements to Select Materials for Asphalt Pavement , 2006 .

[16]  F. Moreno,et al.  Warm mix asphalt: an overview , 2012 .