INFLUENCE OF INTERFACIAL FORCES ON THE MIXTURE PREDICTION OF AN ANAEROBIC SEQUENCING BATCH REACTOR (ASBR)

In the operation of bioreactors, the fluid movement promotes mixing between sludge and substrate. The dynamics of this system are complex, and the interaction between the phases is difficult to evaluate accurately. In this work, Computational Fluid Dynamics is applied to simulate a pilot-scale anaerobic sequencing batch reactor, using a three-dimensional, transient and multiphase modeling. Several correlations were applied to estimate the interfacial forces. Results indicate that the use of different coefficients for the drag and lift forces strongly affects the predicted turbulent kinetic energy, and thus the mixture estimation in the bioreactor. The use of the drag as the only interfacial force provided an average turbulent kinetic energy close to the value found using a more complete model. However, the absence of lift and virtual mass forces had a significant impact on the resulting turbulence distribution.

[1]  Santiago Laín,et al.  Modelling hydrodynamics and turbulence in a bubble column using the Euler-Lagrange procedure , 2002 .

[2]  J. M. Dallavalle.  Micromeritics : the technology of fine particles , 1948 .

[3]  Bo Yu,et al.  Numerical study of bubbly upflows in a vertical channel using the Euler–Lagrange two-way model , 2010 .

[4]  Mandar Tabib,et al.  CFD simulation of bubble column—An analysis of interphase forces and turbulence models , 2008 .

[5]  Faïçal Larachi,et al.  CFD simulation of bubble column flows: Investigations on turbulence models in RANS approach , 2009 .

[6]  Jie Ding,et al.  Scale-up and optimization of biohydrogen production reactor from laboratory-scale to industrial-scale on the basis of computational fluid dynamics simulation , 2010 .

[7]  Fahir Borak,et al.  Bubble column reactors , 2005 .

[8]  Hidesada Tamai,et al.  Transverse migration of single bubbles in simple shear flows , 2002 .

[9]  Mamoru Ishii,et al.  Lift force in bubbly flow systems , 2007 .

[10]  D. Zhang,et al.  The effects of mesoscale structures on the macroscopic momentum equations for two-phase flows , 2002 .

[11]  Jam Hans Kuipers,et al.  Numerical and experimental investigation of the lift force on single bubbles , 2010 .

[12]  Jie Ding,et al.  CFD simulation of an expanded granular sludge bed (EGSB) reactor for biohydrogen production , 2009 .

[13]  Jie Ding,et al.  CFD optimization of continuous stirred-tank (CSTR) reactor for biohydrogen production. , 2010, Bioresource technology.

[14]  M. Zaiat,et al.  Fluidized ASBR treating synthetic wastewater: Effect of recirculation velocity , 2008 .

[15]  Dominique Legendre,et al.  The lift force on a spherical bubble in a viscous linear shear flow , 1998, Journal of Fluid Mechanics.

[16]  N. Ren,et al.  Statistical optimization of culture condition for enhanced hydrogen production by Thermoanaerobacterium thermosaccharolyticum W16. , 2010, Bioresource technology.

[17]  M. Zaiat,et al.  Effect of impeller type and mechanical agitation on the mass transfer and power consumption aspects of ASBR operation treating synthetic wastewater. , 2009, Journal of environmental management.

[18]  P. Saffman.  The lift on a small sphere in a slow shear flow , 1965, Journal of Fluid Mechanics.

[19]  H. Rusche.  Computational fluid dynamics of dispersed two-phase flows at high phase fractions , 2003 .

[20]  Jinjia Wei,et al.  Analysis of drag and lift coefficient expressions of bubbly flow system for low to medium Reynolds number , 2011 .

[21]  Goodarz Ahmadi,et al.  A thermodynamical formulation for dispersed multiphase turbulent flows. II: Simple shear flows for dense mixtures , 1990 .