Review, Challenges, and Future Developments of Electric Taxiing Systems
暂无分享,去创建一个
Stefano Nuzzo | Paolo Giangrande | Michael Galea | Ahmed Hebala | Milos Lukic | M. Galea | M. Lukic | S. Nuzzo | P. Giangrande | A. Hebala
[1] Ali Emadi,et al. Regenerative Braking Capability Analysis of an Electric Taxiing System for a Single Aisle Midsize Aircraft , 2015, IEEE Transactions on Transportation Electrification.
[2] A. Hebala,et al. Different design approaches of surface mounted high performance PMSG , 2017, 2017 Intl Conf on Advanced Control Circuits Systems (ACCS) Systems & 2017 Intl Conf on New Paradigms in Electronics & Information Technology (PEIT).
[3] Serhiy Bozhko,et al. More Electric Aircraft Electro-Mechanical Actuator Regenerated Power Management , 2015, 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE).
[4] Hamdy A. Ashour,et al. Multi-objective particle swarm optimization of wind turbine directly connected PMSG , 2017, 2017 Nineteenth International Middle East Power Systems Conference (MEPCON).
[5] C. Gerada,et al. Axial position estimation of conical shaped motor for green taxiing application , 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).
[6] Volker Gollnick,et al. The Benefit of Innovative Taxi Concepts: The Impact of Airport Size, Fleet Mix and Traffic Growth , 2013 .
[7] Jens Friedrichs,et al. Conceptual Design of Operation Strategies for Hybrid Electric Aircraft , 2018 .
[8] Chris Gerada,et al. Improved Thermal Management and Analysis for Stator End-Windings of Electrical Machines , 2019, IEEE Transactions on Industrial Electronics.
[9] Chris Gerada,et al. Considerations on the Effects That Core Material Machining Has on an Electrical Machine's Performance , 2018, IEEE Transactions on Energy Conversion.
[10] Volker Gollnick,et al. Potential for Fuel Reduction through Electric Taxiing , 2011 .
[11] Rupert Gouws,et al. Comparison analysis of electric motors with two degrees of mechanical freedom: PM synchronous motor vs induction motor , 2016, 2016 II International Young Scientists Forum on Applied Physics and Engineering (YSF).
[12] Christopher Gerada,et al. Considerations on the Development of an Electric Drive for a Secondary Flight Control Electromechanical Actuator , 2019, IEEE Transactions on Industry Applications.
[13] Steven E. Schulz,et al. Exploring the High-Power Inverter: Reviewing critical design elements for electric vehicle applications , 2017, IEEE Electrification Magazine.
[14] Ed Johnson,et al. Electric Drives for Electric Green Taxiing Systems , 2016 .
[15] Chris Gerada,et al. High specific torque motor for propulsion system of aircraft , 2016, 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC).
[16] C. Gerada,et al. Torque density improvements for high performance machines , 2013, 2013 International Electric Machines & Drives Conference.
[17] Chris Gerada,et al. On the Design of Partial Discharge-Free Low Voltage Electrical Machines , 2019, 2019 IEEE International Electric Machines & Drives Conference (IEMDC).
[18] Stefano Nuzzo,et al. Design of Fault-Tolerant Dual Three-Phase Winding PMSM for Helicopter Landing Gear EMA , 2018, 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC).
[19] S. J. Pickering,et al. Thermal design of a permanent magnetic motor for direct drive wheel actuator , 2014, 2014 International Conference on Electrical Machines (ICEM).
[20] Jianping Wen,et al. Robust speed control of permanent magnet synchronous motor , 2013, 2013 IEEE 8th Conference on Industrial Electronics and Applications (ICIEA).
[21] Shoudao Huang,et al. Research on the Axial Force of Conical-Rotor Permanent Magnet Synchronous Motors with Turbines , 2018, Energies.
[22] C. Gerada,et al. State of the Art of Electric Taxiing Systems , 2018, 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC).
[23] Luca Papini,et al. Analytical Thermal Model for Fast Stator Winding Temperature Prediction , 2017, IEEE Transactions on Industrial Electronics.
[24] Michael Schier,et al. High Integrated Electric Machine for Aircraft Autonomous Taxiing , 2011 .
[25] Pat Wheeler,et al. An Active Modulation Scheme to Boost Voltage Utilization of the Dual Converter With a Floating Bridge , 2019, IEEE Transactions on Industrial Electronics.
[26] Jakub Hospodka. Electric taxiing – Taxibot system , 2014 .
[28] H. Roh,et al. Performance assessment of 700-bar compressed hydrogen storage for light duty fuel cell vehicles , 2017 .
[29] Chris Gerada,et al. Thermal analysis of fault‐tolerant electrical machines for aerospace actuators , 2018, IET Electric Power Applications.
[30] Dino Švragulja. Measures for Improving Fuel Efficiency by Implementing Electric Taxi System , 2015 .
[31] C. Gerada,et al. Thermal management of a permanent magnet motor for an directly coupled pump , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).
[32] Richard Curran,et al. The effects of Electric Taxi Systems on airport surface congestion , 2015 .
[33] Luca Mantecchini,et al. Micro-simulation of airport taxiing procedures to improve operation sustainability: Application of semi-robotic towing tractor , 2017, 2017 5th IEEE International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS).
[34] Michael Galea,et al. Electrical Power Generation in Aircraft: Review, Challenges, and Opportunities , 2018, IEEE Transactions on Transportation Electrification.
[35] Di Zhang,et al. A Megawatt-Scale Medium-Voltage High-Efficiency High Power Density “SiC+Si” Hybrid Three-Level ANPC Inverter for Aircraft Hybrid-Electric Propulsion Systems , 2019, IEEE Transactions on Industry Applications.
[36] P. Giangrande,et al. Design of PMSM for EMA Employed in Secondary Flight Control Systems , 2018, 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC).
[37] Paul Stewart,et al. Toward a More Realistic, Cost-Effective, and Greener Ground Movement Through Active Routing—Part I: Optimal Speed Profile Generation , 2016, IEEE Transactions on Intelligent Transportation Systems.
[38] Adam Walker,et al. On the Effects of Advanced End-Winding Cooling on the Design and Performance of Electrical Machines , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).
[39] F. Re. Viability and state of the art of environmentally friendly aircraft taxiing systems , 2012, 2012 Electrical Systems for Aircraft, Railway and Ship Propulsion.
[40] Wenping Cao,et al. Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA) , 2012, IEEE Transactions on Industrial Electronics.
[41] Ali Emadi,et al. Investigation and design of an axial flux permanent magnet machine for a commercial midsize aircraft electric taxiing system , 2017 .
[42] Harshad Khadilkar,et al. Estimation of Aircraft Taxi-out Fuel Burn using Flight Data Recorder Archives , 2011 .
[43] David Gerada,et al. Back-Iron Extension Thermal Benefits for Electrical Machines With Concentrated Windings , 2020, IEEE Transactions on Industrial Electronics.
[44] S.M.L. Soepnel,et al. Impact of Electric Taxi Systems on Airport Apron Operations and Gate Congestion at AAS , 2017 .
[45] Juvenal Rodríguez-Reséndiz,et al. Robust Speed Control of Permanent Magnet Synchronous Motors Using Two-Degrees-of-Freedom Control , 2018, IEEE Transactions on Industrial Electronics.
[46] Francesco Cupertino,et al. A Two-Degrees-of-Freedom System for Wheel Traction Applications , 2018, IEEE Transactions on Industrial Electronics.
[47] Hang Zhou,et al. Temperature control of permanent-magnet synchronous motor using phase change material , 2015, 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).
[48] Ali Emadi,et al. Investigation of regenerative braking on the energy consumption of an electric taxiing system for a single aisle midsize aircraft , 2014, IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society.
[49] Michael J. Armstrong,et al. Comparison of Candidate Architectures for Future Distributed Propulsion Aircraft , 2016, IEEE Transactions on Applied Superconductivity.
[50] Yihua Hu,et al. Overview of 2-Degree-of-Freedom Rotary-Linear Motors Focusing on Coupling Effect , 2019, IEEE Transactions on Magnetics.
[51] Xiaofeng Ding,et al. A review of gallium nitride power device and its applications in motor drive , 2019, CES Transactions on Electrical Machines and Systems.
[52] Dimitri N. Mavris,et al. A Requirements-driven Methodology for Integrating Subsystem Architecture Sizing and Analysis into the Conceptual Aircraft Design Phase , 2014 .
[53] G. Chen,et al. Supercapacitor and supercapattery as emerging electrochemical energy stores , 2017 .
[54] Bulent Sarlioglu,et al. More Electric Aircraft: Review, Challenges, and Opportunities for Commercial Transport Aircraft , 2015, IEEE Transactions on Transportation Electrification.
[55] X. Roboam,et al. More Electricity in the Air: Toward Optimized Electrical Networks Embedded in More-Electrical Aircraft , 2012, IEEE Industrial Electronics Magazine.
[56] Yu Zhang,et al. Comparison of emerging ground propulsion systems for electrified aircraft taxi operations , 2014 .
[57] Evgeni D. Ganev,et al. Electric Drives for Electric Green Taxiing Systems: Examining and Evaluating the Electric Drive System , 2017, IEEE Electrification Magazine.
[58] Michael Schier,et al. Electric Wheel Hub Motor for Aircraft Application , 2012 .
[59] Di Zhang,et al. Development of Megawatt-Scale Medium-Voltage High Efficiency High Power Density Power Converters for Aircraft Hybrid-Electric Propulsion Systems , 2018, 2018 AIAA/IEEE Electric Aircraft Technologies Symposium (EATS).
[60] Francesco Cupertino,et al. Axial Position Estimation of Conical Shaped Motors for Aerospace Traction Applications , 2017, IEEE Transactions on Industry Applications.
[61] Chris Gerada,et al. Feasibility and electromagnetic design of direct drive wheel actuator for green taxiing , 2011, 2011 IEEE Energy Conversion Congress and Exposition.
[62] Dimitri N. Mavris,et al. Assessing Taxiing Trade Spaces from Aircraft, Airport, and Airline Perspectives , 2015 .
[63] Christopher Gerada,et al. Design and Testing of PMSM for Aerospace EMA Applications , 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society.
[64] C. Gerada,et al. Two-Dimensional Analysis for Conical Permanent Magnet Motors , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).
[65] Mehrdad Ehsani,et al. A Review of the More Electric Aircraft Power Electronics , 2019, 2019 IEEE Texas Power and Energy Conference (TPEC).
[66] Chengliang Liu,et al. A review of powered wheel for aircraft , 2016, 2016 IEEE International Conference on Aircraft Utility Systems (AUS).
[67] Yu Zhang,et al. Deriving Benefits from Alternative Aircraft-Taxi Systems , 2016 .
[68] C. Gerada,et al. Development of an aircraft wheel actuator for green taxiing , 2014, 2014 International Conference on Electrical Machines (ICEM).
[69] Jakub Hospodka. Cost-benefit analysis of electric taxi systems for aircraft , 2014 .
[70] C. Gerada,et al. Design and Losses Analysis of a High Power Density Machine for Flooded Pump Applications , 2018, IEEE Transactions on Industry Applications.
[71] Parth Vaishnav,et al. Costs and Benefits of Reducing Fuel Burn and Emissions from Taxiing Aircraft , 2014 .
[72] Wu Xin,et al. A Study of Partial Discharge in High Voltage DC Distribution Systems for Hybrid Electric Aircraft , 2018, 2018 AIAA/IEEE Electric Aircraft Technologies Symposium (EATS).
[73] Ayman El-Refaie,et al. High specific power electrical machines: A system perspective , 2017, 2017 20th International Conference on Electrical Machines and Systems (ICEMS).
[74] H. Balakrishnan,et al. Evaluation of strategies for reducing taxi-out emissions at airports , 2009 .