New g-functions for the hourly simulation of double U-tube borehole heat exchanger fields

A new method for the hourly simulation of fields of long BHEs (borehole heat exchangers) is presented, in dimensionless form. The method considers also the internal structure of the BHE, with reference to double U-tube BHEs. The analytical expressions of new g-functions (time evolutions of the dimensionless temperature, averaged along the BHE length, due to a uniform and constant heat load) are presented, which complement those reported in Zanchini E., Lazzari S., Energy 2013; 59: 570–80. The new g-functions yield the dimensionless temperature at the interface tubes-grout, and allow a more precise determination of the time evolution of the temperature of the operating fluid during hourly peak loads. Moreover, g-functions at the interface tubes-grout and at several radial distances are reported also for BHEs with a ratio 500 between length and diameter, a value not considered in the previous paper. Due to its higher accuracy, the new method is recommended for the hourly simulation and the optimization of ground-coupled heap pump systems with double U-tube BHEs.

[1]  Per Eskilson.  Thermal analysis of heat extraction boreholes , 1987 .

[2]  Fleur Loveridge,et al.  G-Functions for multiple interacting pile heat exchangers , 2014 .

[3]  Fabio Bozzoli,et al.  Modeling approaches applied to the thermal response test: A critical review of the literature , 2011 .

[4]  L. Schiavi,et al.  Estimation of soil and grout thermal properties through a TSPEP (two-step parameter estimation proce , 2011 .

[5]  Petr Bujok,et al.  Assessment of the influence of shortening the duration of TRT (thermal response test) on the precision of measured values , 2014 .

[6]  C. K. Lee,et al.  A modified multi-ground-layer model for borehole ground heat exchangers with an inhomogeneous groundwater flow , 2012 .

[7]  S. Gehlin.  Thermal response test : method development and evaluation , 2002 .

[8]  Fleur Loveridge,et al.  Temperature response functions (G-functions) for single pile heat exchangers , 2013 .

[9]  Richard Labib,et al.  A Multiple Load Aggregation Algorithm for Annual Hourly Simulations of GCHP Systems , 2004 .

[10]  Z. Fang,et al.  Heat transfer analysis of boreholes in vertical ground heat exchangers , 2003 .

[11]  Tatyana V. Bandos,et al.  Finite line-source model for borehole heat exchangers: effect of vertical temperature variations , 2009 .

[12]  Enzo Zanchini,et al.  Improving the thermal performance of coaxial borehole heat exchangers , 2010 .

[13]  Enzo Zanchini,et al.  Long-term performance of large borehole heat exchanger fields with unbalanced seasonal loads and groundwater flow , 2012 .

[14]  G. Hellström,et al.  Comparison of four models for thermal response test evaluation , 2003 .

[15]  S. Rees,et al.  A preliminary assessment of the effects of groundwater flow on closed-loop ground source heat pump systems , 2000 .

[16]  Marco Fossa,et al.  The effect of borefield geometry and ground thermal load profile on hourly thermal response of geothermal heat pump systems , 2013 .

[17]  Marco Fossa,et al.  A fast method for evaluating the performance of complex arrangements of borehole heat exchangers , 2011 .

[18]  Ladislaus Rybach,et al.  Sustainability aspects of geothermal heat pump operation, with experience from Switzerland , 2010 .

[19]  E. Zanchini,et al.  Design of a nearly zero energy one-family house in North-Centre Italy , 2014 .

[20]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[21]  L. Lamarche,et al.  New solutions for the short-time analysis of geothermal vertical boreholes , 2007 .

[22]  Marco Fossa,et al.  The temperature penalty approach to the design of borehole heat exchangers for heat pump application , 2011 .

[23]  Roland Wagner,et al.  Evaluating thermal response tests using parameter estimation for thermal conductivity and thermal capacity , 2005 .

[24]  Stephen P. Kavanaugh,et al.  Ground Source Heat Pumps : Design of Geothermal Systems for Commercial and Institutional Buildings , 1997 .

[25]  Michel Bernier,et al.  A contribution towards the determination of g-functions using the finite line source , 2013 .

[26]  E. Zanchini,et al.  Long-term performance of BHE (borehole heat exchanger) fields with negligible groundwater movement , 2010 .

[27]  Stefano Lazzari,et al.  Temperature distribution in a field of long Borehole Heat Exchangers (BHEs) subjected to a monthly averaged heat flux , 2013 .

[28]  Z. Fang,et al.  A finite line‐source model for boreholes in geothermal heat exchangers , 2002 .

[29]  Alvin C.K. Lai,et al.  New temperature response functions (G functions) for pile and borehole ground heat exchangers based on composite-medium line-source theory , 2012 .

[30]  Stefano Lazzari,et al.  Effects of flow direction and thermal short-circuiting on the performance of small coaxial ground heat exchangers , 2010 .

[31]  Simon J. Rees,et al.  A transient two-dimensional finite volume model for the simulation of vertical U-tube ground heat exchangers , 1999 .

[32]  Louis Lamarche,et al.  A new contribution to the finite line-source model for geothermal boreholes , 2007 .