Investigation of a two-dimensional model on microbial fuel cell with different biofilm porosities and external resistances

Abstract To discuss the internal mass distribution in microbial fuel cell (MFC), a transient, two-dimensional model for single-chamber, air cathode MFC was developed in this work. This model was established by finite element method considering two kinds of microorganisms’ growth, internal mass transfer and bio-electrochemical kinetics. The heterogeneous chemical components distribution in the anode chamber, the growth and spatial distribution of exoelectrogens and methanogens were discussed. The effect of biofilm porosity and external resistance on the electron transfer from redox mediator to the anode, microorganism growth and electricity generation performance in MFC was investigated. Simulation results revealed that the exoelectrogens and methanogens concentrations distributed heterogeneously with different biofilm porosities. Higher biofilm porosity was beneficial to final electron transfer step and had different impact on electricity generation at start-up and steady stage, respectively. Lower external resistances contributed to enhancing MFC performance. Our model should be helpful for the optimization of the design and operation conditions in MFCs.

[1]  Mark C M van Loosdrecht,et al.  A general description of detachment for multidimensional modelling of biofilms. , 2005, Biotechnology and bioengineering.

[2]  Allen J. Bard,et al.  Electrochemical Methods: Fundamentals and Applications , 1980 .

[3]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .

[4]  John M. Regan,et al.  Influence of External Resistance on Electrogenesis, Methanogenesis, and Anode Prokaryotic Communities in Microbial Fuel Cells , 2010, Applied and Environmental Microbiology.

[5]  M. V. van Loosdrecht,et al.  A computational model for biofilm-based microbial fuel cells. , 2007, Water research.

[6]  Heijnen,et al.  Influence of biomass production and detachment forces on biofilm structures in a biofilm airlift suspension reactor , 1998, Biotechnology and bioengineering.

[7]  D. A. G. Bruggeman Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen Substanzen , 1935 .

[8]  B. Rittmann,et al.  Complete nitrogen removal by simultaneous nitrification and denitrification in flat-panel air-cathode microbial fuel cells treating domestic wastewater , 2017 .

[9]  Shiqi Ou,et al.  Modeling and validation of single-chamber microbial fuel cell cathode biofilm growth and response to oxidant gas composition , 2016 .

[10]  Xi Chen,et al.  Optimization of membrane stack configuration in enlarged microbial desalination cells for efficient water desalination , 2016 .

[11]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[12]  M. Ghangrekar,et al.  Enhancing waste activated sludge digestion and power production using hypochlorite as catholyte in clayware microbial fuel cell. , 2015, Bioresource technology.

[13]  S Srikanth,et al.  Positive anodic poised potential regulates microbial fuel cell performance with the function of open and closed circuitry. , 2010, Bioresource technology.

[14]  M C M van Loosdrecht,et al.  Mathematical model for microbial fuel cells with anodic biofilms and anaerobic digestion. , 2008, Water science and technology : a journal of the International Association on Water Pollution Research.

[15]  Meiying Xu,et al.  Enhancing the bioremediation by harvesting electricity from the heavily contaminated sediments. , 2015, Bioresource technology.

[16]  O. Scialdone,et al.  Cathodic abatement of Cr(VI) in water by microbial reverse-electrodialysis cells , 2015 .

[17]  Jose A. Egea,et al.  Developments in microbial fuel cell modeling , 2015 .

[18]  Soheila Yaghmaei,et al.  A Generalized Model for Complex Wastewater Treatment with Simultaneous Bioenergy Production Using the Microbial Electrochemical Cell , 2015 .

[19]  H. Rismani-Yazdi,et al.  Effect of external resistance on bacterial diversity and metabolism in cellulose-fed microbial fuel cells. , 2011, Bioresource Technology.

[20]  Keith Scott,et al.  Model based evaluation of the effect of pH and electrode geometry on microbial fuel cell performance. , 2010, Bioelectrochemistry.

[21]  Younggy Kim,et al.  Methanogenesis control by electrolytic oxygen production in microbial electrolysis cells , 2014 .

[22]  Kyu-Jung Chae,et al.  Methanogenesis control by employing various environmental stress conditions in two-chambered microbial fuel cells. , 2010, Bioresource technology.

[23]  D. R. Bond,et al.  Shewanella secretes flavins that mediate extracellular electron transfer , 2008, Proceedings of the National Academy of Sciences.

[24]  Shaoan Cheng,et al.  Increasing efficiencies of microbial fuel cells for collaborative treatment of copper and organic wastewater by designing reactor and selecting operating parameters. , 2013, Bioresource technology.

[25]  Y. Wong,et al.  A highly efficient single chambered up-flow membrane-less microbial fuel cell for treatment of azo dye Acid Orange 7-containing wastewater. , 2015, Bioresource technology.

[26]  W. Verstraete,et al.  Microbial phenazine production enhances electron transfer in biofuel cells. , 2005, Environmental science & technology.

[27]  Duu-Jong Lee,et al.  Long-term operation of manure-microbial fuel cell. , 2015, Bioresource technology.

[28]  Jonathan D. Posner,et al.  Sequential Flow Membraneless Microfluidic Fuel Cell with Porous Electrodes , 2008 .

[29]  Bruce E. Rittmann,et al.  A kinetic perspective on extracellular electron transfer by anode-respiring bacteria. , 2010, FEMS microbiology reviews.

[30]  R. P. Pinto,et al.  A two-population bio-electrochemical model of a microbial fuel cell. , 2010, Bioresource technology.

[31]  T. Vogel,et al.  Is resistance futile? Changing external resistance does not improve microbial fuel cell performance. , 2010, Bioelectrochemistry.

[32]  Hong Liu,et al.  Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane. , 2004, Environmental science & technology.

[33]  N. Verma,et al.  Simultaneous Cr(VI) reduction and bioelectricity generation using microbial fuel cell based on alumina-nickel nanoparticles-dispersed carbon nanofiber electrode , 2017 .

[34]  H. Hamelers,et al.  Butler-Volmer-Monod model for describing bio-anode polarization curves. , 2011, Bioresource technology.

[35]  R. Parra,et al.  New ceramic electrodes allow reaching the target current density in bioelectrochemical systems , 2015 .

[36]  Jun Li,et al.  Biofilm formation and electricity generation of a microbial fuel cell started up under different external resistances , 2011 .

[37]  W. Verstraete,et al.  Biofuel Cells Select for Microbial Consortia That Self-Mediate Electron Transfer , 2004, Applied and Environmental Microbiology.

[38]  Aijie Wang,et al.  Temporal-spatial changes in viabilities and electrochemical properties of anode biofilms. , 2015, Environmental science & technology.

[39]  Younggy Kim,et al.  The yield and decay coefficients of exoelectrogenic bacteria in bioelectrochemical systems. , 2016, Water research.

[40]  Weifeng Liu,et al.  The effect of biofilm thickness on electrochemical activity of Geobacter sulfurreducens , 2016 .

[41]  Discrete boundary conditions for problems with interface , 2001 .

[42]  C. Santoro,et al.  The effects of carbon electrode surface properties on bacteria attachment and start up time of microbial fuel cells , 2014 .

[43]  Kyu-Jung Chae,et al.  Selective inhibition of methanogens for the improvement of biohydrogen production in microbial electrolysis cells , 2010 .

[44]  Yingzhi Zeng,et al.  Modelling and simulation of two-chamber microbial fuel cell , 2010 .

[45]  Willy Verstraete,et al.  The anode potential regulates bacterial activity in microbial fuel cells , 2008, Applied Microbiology and Biotechnology.

[46]  B. Tartakovsky,et al.  Multi-population model of a microbial electrolysis cell. , 2011, Environmental science & technology.

[47]  Ramin Sedaqatvand,et al.  Parameter estimation and characterization of a single-chamber microbial fuel cell for dairy wastewater treatment. , 2013, Bioresource technology.

[48]  Y. Liu,et al.  The effects of shear force on the formation, structure and metabolism of aerobic granules , 2001, Applied Microbiology and Biotechnology.

[49]  S R Guiot,et al.  Anaerobic digestion model No. 1-based distributed parameter model of an anaerobic reactor: II. Model validation. , 2008, Bioresource technology.

[50]  Jun Guo,et al.  Sediment microbial fuel cell prefers to degrade organic chemicals with higher polarity. , 2015, Bioresource technology.

[51]  Chularat Sakdaronnarong,et al.  Potential of lignin as a mediator in combined systems for biomethane and electricity production from ethanol stillage wastewater , 2015 .

[52]  R. Cioffi,et al.  Fabrication and characterization of graphite-cement composites for microbial fuel cells applications , 2017 .

[53]  Li Li,et al.  Partial modification of flow-through porous electrodes in microfluidic fuel cell , 2015 .

[54]  U. Schröder,et al.  Metal-Polymer Hybrid Architectures as Novel Anode Platform for Microbial Electrochemical Technologies. , 2017, ChemSusChem.

[55]  Bruce E Rittmann,et al.  Conduction‐based modeling of the biofilm anode of a microbial fuel cell , 2007, Biotechnology and bioengineering.

[56]  Y. Song,et al.  Hydrogen production in microbial reverse-electrodialysis electrolysis cells using a substrate without buffer solution. , 2016, Bioresource technology.