Hydrogen damage in 34CrMo4 pressure vessel steel with high tensile strength

[1]  Nwe Ni Tun,et al.  Creep crack growth analysis using Ct-parameter for internal circumferential and external axial surface cracks in a pressurized cylinder , 2016 .

[2]  K. Yoon,et al.  Change of anisotropic tensile strength due to amount of severe plastic deformation in aluminum 2024 alloy , 2011 .

[3]  Srimanta Kumar Das,et al.  CNG cylinder burst in a bus during gas filling - lesson learned. , 2010 .

[4]  Sung Chan Kim,et al.  Thermal characteristics during hydrogen fueling process of type IV cylinder , 2010 .

[5]  K. Yoon,et al.  Assessment of tensile strength using small punch test for transversely isotropic aluminum 2024 alloy produced by equal channel angular pressing , 2010 .

[6]  K. Yoon,et al.  Assessment of power law creep constants of Gr91 steel using small punch creep tests , 2009 .

[7]  Dominique Perreux,et al.  Methodology to improve the lifetime of type III HP tank with a steel liner , 2009 .

[8]  S. Dey,et al.  Hydrogen entry into pipeline steel under freely corroding conditions in two corroding media , 2006 .

[9]  Noam Eliaz,et al.  Characteristics of hydrogen embrittlement, stress corrosion cracking and tempered martensite embrittlement in high-strength steels , 2002 .

[10]  D. J. Brookfield,et al.  Material properties from small specimens using the punch and bulge test , 1999 .

[11]  Hideaki Takahashi,et al.  Development of a further-miniaturized specimen of 3 mm diameter for tem disk (ø 3 mm) small punch tests , 1987 .

[12]  K. Yoon,et al.  Evaluation of Hydrogen Embrittlement Behavior in INCONEL Alloy 617 by Small Punch Test , 2010 .

[13]  Russel H. Jones,et al.  Effects of Hydrogen on Materials , 2008 .

[14]  Jae-Kun Yoon,et al.  Suggestions for Safety Improvement of CNG Bus Based on Accident and Failure Analysis , 2008 .

[15]  K. Takai,et al.  Substitution of High-Pressure Charge by Electrolysis Charge and Hydrogen Environment Embrittlement Susceptibilities for Inconel 625 and SUS 316L , 2006 .

[16]  Otto K. Harling,et al.  The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties , 1981 .