Diagnostic Technique based on Rotor Modulating Signals Signature Analysis for Doubly Fed Induction Machines in Wind Generator Systems

The paper introduces an advanced monitoring and diagnosis system for the detection of incipient electrical faults in doubly fed induction generators (DFIGs) used in wind generator systems. In this application the rotor power is supplied by a converter for the control of active and reactive power flow from the generator to the mains. The paper deals with a new diagnostic method based on the analysis of the rotor modulating signals. Simulation and experimental results confirm that the analysis of the spectra of rotor input modulating signals leads to an effective diagnostic procedure. The system is suitable to be easily embedded in the drive control system

[1]  F. Filippetti,et al.  Closed loop control impact on the diagnosis of induction motors faults , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[2]  D. Casadei,et al.  Experimental fault characterization of doubly fed induction machines for wind power generation , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[3]  E. Ritchie,et al.  Model of stator inter-turn short circuit fault in doubly-fed induction generators for wind turbine , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[4]  Alberto Bellini,et al.  Quantitative Evaluation of Induction Motor Broken Bars By Means of Electric Signals Signatures , 2001 .

[5]  Giovanni Franceschini,et al.  On-field experience with online diagnosis of large induction motors cage failures using MCSA , 2002 .

[6]  J.R. Saenz,et al.  On-line stator winding fault diagnosis in induction generators for renewable generation , 2004, Proceedings of the 12th IEEE Mediterranean Electrotechnical Conference (IEEE Cat. No.04CH37521).

[7]  Longya Xu,et al.  A flexible active and reactive power control strategy for a variable speed constant frequency generating system , 1993 .

[8]  Longya Xu,et al.  A flexible active and reactive power control strategy for a variable speed constant frequency generating system , 1993, Proceedings of IEEE Power Electronics Specialist Conference - PESC '93.

[9]  V. T. Ranganathan,et al.  Variable-Speed Wind Power Generation Using a Doubly Fed Wound Rotor Induction Machine: A Comparison with Alternative Schemes , 2002 .

[10]  J. Penman,et al.  Detection and location of interturn short circuits in the stator windings of operating motors , 1994 .

[11]  F. Filippetti,et al.  Simulation of a doubly-fed induction machine for wind turbine generator fault analysis , 2005, 2005 5th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives.

[12]  D. Casadei,et al.  Double-fed three-phase induction machine abc model for simulation and control purposes , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[13]  F. Filippetti,et al.  Quantitative evaluation of induction motor broken bars by means of electrical signature analysis , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[14]  G. Tapia,et al.  Modeling and control of a wind turbine driven doubly fed induction generator , 2003 .

[15]  Fiorenzo Filippetti,et al.  Recent developments of induction motor drives fault diagnosis using AI techniques , 2000, IEEE Trans. Ind. Electron..

[16]  D. Casadei,et al.  Flux signature analysis: An alternative method for the fault diagnosis of induction machines , 2005, 2005 IEEE Russia Power Tech.

[17]  R. Datta,et al.  Variable-Speed Wind Power Generation Using a Doubly Fed Wound Rotor Induction Machine: A Comparison with Alternative Schemes , 2002, IEEE Power Engineering Review.

[18]  Ion Boldea,et al.  Condition monitoring of wind generators , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..