As the exploitation of hydrocarbon reserves moves towards deeper waters, the floating structures are becoming more and more popular, and the catenary and taut mooring systems are two widespread mooring systems which are used for these floating structures. However, both of them have their inherent drawbacks. The aim of the present work is to develop and validate a new mooring system which will overcome these shortcomings. To this end, the motion performance of a semi-submersible platform is simulated by employing a full time domain coupled analysis method. It is shown that the new mooring system yields very good motion performance when benchmarked against the taut mooring system, and the reasons for this improved performance are discussed. Also, the new mooring system is compatible with the characteristic of catenary mooring system, which eliminates the requirement of anti-uplift capacity of the anchors. The second aim of this paper is to explore the proper water depth in employing this new mooring system. For this purpose, several typical water depths are simulated. It is found that the new mooring system works well both in deep water and ultra-deep water. But, as the water depth becomes deeper, the advantages of the new mooring system are reduced.Copyright © 2011 by ASME
[1]
Moo-Hyun Kim,et al.
Coupled-dynamic analysis of floating structures with polyester mooring lines
,
2008
.
[2]
Subrata K. Chakrabarti,et al.
Handbook of Offshore Engineering
,
2005
.
[3]
Lars Johanning,et al.
Measurements of static and dynamic mooring line damping and their importance for floating WEC devices
,
2007
.
[4]
S. Amico,et al.
Socketing of polyester fibre ropes with epoxy resins for deep-water mooring applications
,
2006
.
[5]
Nuno Fonseca,et al.
Design of a Mooring System With Synthetic Ropes for the FLOW Wave Energy Converter
,
2009
.