A comparative study on microstructure, nanomechanical and corrosion behaviors of AlCoCuFeNi high entropy alloys fabricated by selective laser melting and laser metal deposition

[1]  F. Ouyang,et al.  High temperature oxidation behavior of high entropy alloy Al4Co3Cr25Cu10Fe25Ni33 in oxygen-containing atmospheres , 2021, Materials Chemistry and Physics.

[2]  Hong Wu,et al.  Microstructure and tribological behaviors of FeCoCrNiMoSix high-entropy alloy coatings prepared by laser cladding , 2021, Surface and Coatings Technology.

[3]  Xiaopeng Li,et al.  Fabrication of laminated high entropy alloys using differences in laser melting deposition characteristics of FeCoCrNi and FeCoCrNiAl , 2021, Journal of Manufacturing Processes.

[4]  M. Moradi,et al.  Direct laser metal deposition additive manufacturing of Inconel 718 superalloy: Statistical modelling and optimization by design of experiments , 2021 .

[5]  K. Tsuchiya,et al.  Phase transformation and morphological features in a cold-worked CrMnFeCoNi high entropy alloy with Al addition , 2021, Materials Characterization.

[6]  Xiao-nan Wang,et al.  Study on the mechanism of heat input on the grain boundary distribution and impact toughness in CGHAZ of X100 pipeline steel from the aspect of variant , 2021 .

[7]  Md. Zahidur Rahaman,et al.  Pressure- and temperature-dependent physical metallurgy in a face-centered cubic NiCoFeCrMn high entropy alloy and its subsystems , 2021 .

[8]  Yangchuan Cai,et al.  Manufacturing of FeCoCrNi + FeCoCrNiAl laminated high-entropy alloy by laser melting deposition (LMD) , 2021 .

[9]  Wei-min Liu,et al.  A novel Cu-doped high entropy alloy with excellent comprehensive performances for marine application , 2021 .

[10]  M. Easton,et al.  Processing window for laser metal deposition of Al 7075 powder with minimized defects , 2021 .

[11]  Shi-feng Liu,et al.  Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion , 2020 .

[12]  Yongchang Liu,et al.  Anomalous texture development induced by grain yielding anisotropy in Ni and Ni-Mo alloys , 2020 .

[13]  H. Kokawa,et al.  Cracking mechanism and mechanical properties of selective laser melted CoCrFeMnNi high entropy alloy using different scanning strategies , 2020 .

[14]  D. Gu,et al.  Anisotropic corrosion behavior of Sc and Zr modified Al-Mg alloy produced by selective laser melting , 2020 .

[15]  T. Yuan,et al.  Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms , 2020 .

[16]  Fu-hui Wang,et al.  A novel Cu-bearing high-entropy alloy with significant antibacterial behavior against corrosive marine biofilms , 2020 .

[17]  B. Richardson,et al.  Effect of Interlayer Cooling Time, Constraint and Tool Path Strategy on Deformation of Large Components Made by Laser Metal Deposition with Wire , 2019, Applied Sciences.

[18]  T. Nieh,et al.  Evaluating elastic properties of a body-centered cubic NbHfZrTi high-entropy alloy – A direct comparison between experiments and ab initio calculations , 2019, Intermetallics.

[19]  Xiaohua Deng,et al.  Composition and phase structure dependence of mechanical and magnetic properties for AlCoCuFeNi high entropy alloys , 2019, Journal of Materials Science & Technology.

[20]  M. Schuisky,et al.  Elemental segregation in an AlCoCrFeNi high-entropy alloy – A comparison between selective laser melting and induction melting , 2019, Journal of Alloys and Compounds.

[21]  M. Bermingham,et al.  Comparative Study of Pure Iron Manufactured by Selective Laser Melting, Laser Metal Deposition, and Casting Processes , 2019, Advanced Engineering Materials.

[22]  Qian Yu,et al.  The role of low angle grain boundary in deformation of titanium and its size effect , 2019, Scripta Materialia.

[23]  T. Shanmugasundaram,et al.  High temperature wear in CoCrFeNiCux high entropy alloys: The role of Cu , 2019, Scripta Materialia.

[24]  Peizhen Li,et al.  Nanoscale serration and creep characteristics of Al0.5CoCrCuFeNi high-entropy alloys , 2018, Journal of Alloys and Compounds.

[25]  K. Berent,et al.  Phase composition of AlxFeNiCrCo high entropy alloys prepared by sintering and arc-melting methods , 2018 .

[26]  Z. Zhong,et al.  Precipitation and its strengthening of Cu-rich phase in CrMnFeCoNiCux high-entropy alloys , 2018 .

[27]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[28]  Seung M. Oh,et al.  Microstructural stability and mechanical properties of equiatomic CoCrCuFeNi, CrCuFeMnNi, CoCrCuFeMn alloys , 2017 .

[29]  P. Liaw,et al.  Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys , 2017 .

[30]  Jian Lu,et al.  High-entropy alloy: challenges and prospects , 2016 .

[31]  Wei-min Liu,et al.  Tribological behavior of AlCoCrCuFeNi and AlCoCrFeNiTi0.5 high entropy alloys under hydrogen peroxide solution against different counterparts , 2015 .

[32]  Howard Stone,et al.  Research data supporting: "Precipitation in the Equiatomic High-Entropy Alloy CrMnFeCoNi" , 2015 .

[33]  D. Depla,et al.  High entropy alloy thin films deposited by magnetron sputtering of powder targets , 2015 .

[34]  K. Dahmen,et al.  Microstructures and properties of high-entropy alloys , 2014 .

[35]  X. Liang,et al.  Effect of Nb addition on the structure and mechanical behaviors of CoCrCuFeNi high-entropy alloy coatings , 2014 .

[36]  A. Hirata,et al.  Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation-strengthened ferritic alloys , 2013 .

[37]  J. Kruth,et al.  Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum , 2013 .

[38]  A. Hirata,et al.  Microstructure characterization of Cu-rich nanoprecipitates in a Fe–2.5 Cu–1.5 Mn–4.0 Ni–1.0 Al multicomponent ferritic alloy , 2013 .

[39]  T. Clyne,et al.  A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature , 2006 .