Increased operation reliability of HV apparatus through PD monitoring

In this article, the challenges with continuous partial discharge (PD) monitoring of HV power cables, transformers and rotating machines are presented. A versatile partial discharge monitoring system is described that is applicable to different high-voltage equipment and can be connected to a vast range of sensors. In the case of power cables, the paper deals with continuous monitoring of a 420 kV XLPE cable system in an underground tunnel. The method that can simultaneously detect and locate partial discharges at all accessories is described. In the case of transformers, partial discharges are measured at the bushing measuring taps and in the UHF range with an antenna installed within the transformer tank. The experience gathered from PD monitoring to assess the condition of turbo and hydro generator stator winding insulation is also presented in the paper. The advanced features for noise and PD defects separation based on synchronous multi-channel techniques are shown. Case studies are included, which indicate that critical defects can be detected early and their evolution can be monitored.

[1]  Alfredo Contin,et al.  Advanced PD inference in on-field measurements. I. Noise rejection , 2003 .

[2]  G.C. Stone,et al.  Objective methods to interpret partial-discharge data on rotating-machine stator windings , 2006, IEEE Transactions on Industry Applications.

[3]  G.C. Stone,et al.  Partial discharge diagnostics and electrical equipment insulation condition assessment , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[4]  A. Cavallini,et al.  On-line partial discharges monitoring of high voltage XLPE / fluid-filled transition joints , 2011, 2011 Electrical Insulation Conference (EIC)..

[5]  G. C. Montanari.  On line partial discharge diagnosis of power cables , 2009, 2009 IEEE Electrical Insulation Conference.

[6]  G. Stone,et al.  A perspective on online partial discharge monitoring for assessment of the condition of rotating machine stator winding insulation , 2012, IEEE Electrical Insulation Magazine.

[7]  G.C. Stone,et al.  Effect of manufacturer, winding age and insulation type on stator winding partial discharge levels , 2004, IEEE Electrical Insulation Magazine.

[8]  W. Koltunowicz,et al.  Synchronous multi-channel PD measurements , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[9]  W. Koltunowicz,et al.  Monitoring of 420 kV XLPE cable system in underground tunnel , 2012, 2012 IEEE International Conference on Condition Monitoring and Diagnosis.