Demonstration of a chipless harmonic tag working as crack sensor for electronic sealing applications

This work proposes a chipless radio frequency identification approach based on the working principle of the harmonic radar. A frequency multiplication stage is performed by a non-linearity (i.e. a Shottky diode) on the tag in order for the tag answer to be insulated from the interrogation signal, thus avoiding the need for clutter cancellation techniques. Firstly, the performance of a simple one-bit harmonic tag relying on a low-power frequency doubler is analyzed and then a novel crack sensor, implemented by adding a disposable band-stop filter, is presented. Both solutions demonstrate tag-to-reader operational distances beyond 1 m. The characterizing blocks (namely the frequency doubler and the filter) are fabricated on cellulose substrates (i.e. regular photographic paper), thus being conformal to their implementation for applications in the new paradigm of Internet of Things.

[1]  L. Boulon,et al.  A chipless HF RFID tag with signature as a voltage sensor , 2012, 2012 IEEE International Conference on Wireless Information Technology and Systems (ICWITS).

[2]  B. Colpitts,et al.  Harmonic radar transceiver design: miniature tags for insect tracking , 2004, IEEE Transactions on Antennas and Propagation.

[3]  Marco Dionigi,et al.  Microwave Circuits in Paper Substrates Exploiting Conductive Adhesive Tapes , 2012, IEEE Microwave and Wireless Components Letters.

[4]  Wenjing Su,et al.  A novel inkjet-printed microfluidic tunable coplanar patch antenna , 2014, 2014 IEEE Antennas and Propagation Society International Symposium (APSURSI).

[5]  A. Lázaro,et al.  Passive Wireless Temperature Sensor Based on Time-Coded UWB Chipless RFID Tags , 2012, IEEE Transactions on Microwave Theory and Techniques.

[6]  Hwan-Sik Yoon,et al.  Aerosol-Printed Strain Sensor Using PEDOT:PSS , 2013, IEEE Sensors Journal.

[7]  D. Pozar.  Microwave Engineering , 1990 .

[8]  Nemai Chandra Karmakar,et al.  Compact printable orientation independent chipless RFID tag , 2012 .

[9]  L. Roselli,et al.  Harmonic chipless sensor exploiting wireless autonomous communication and energy transfer , 2014, 2014 IEEE Wireless Power Transfer Conference.

[10]  Nuri W. Emanetoglu,et al.  A low-cost harmonic radar for tracking very small tagged amphibians , 2013, 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

[11]  Ramon Villarino,et al.  A Passive Harmonic Tag for Humidity Sensing , 2014 .

[12]  Vivek Subramanian,et al.  Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices , 2005, Proceedings of the IEEE.

[13]  Etienne Perret,et al.  A Depolarizing Chipless RFID Tag for Robust Detection and Its FCC Compliant UWB Reading System , 2013, IEEE Transactions on Microwave Theory and Techniques.

[14]  Giulia Orecchini,et al.  Low-Power Frequency Doubler in Cellulose-Based Materials for Harmonic RFID Applications , 2014, IEEE Microwave and Wireless Components Letters.

[15]  Nemai Chandra Karmakar,et al.  Chipless RFID: Bar Code of the Future , 2010, IEEE Microwave Magazine.

[16]  Wenbin Dou,et al.  Study of a Uniplanar Monopole Antenna for Passive Chipless UWB-RFID Localization System , 2010, IEEE Transactions on Antennas and Propagation.

[17]  R. Jakoby,et al.  Quasi-chipless wireless temperature sensor based on harmonic radar , 2014 .

[18]  Nemai Chandra Karmakar,et al.  Towards chipless RFID-based sensing for pervasive surface crack detection , 2012, 2012 IEEE International Conference on RFID-Technologies and Applications (RFID-TA).

[19]  L. Roselli,et al.  No Battery Required: Perpetual RFID-Enabled Wireless Sensors for Cognitive Intelligence Applications , 2013, IEEE Microwave Magazine.

[20]  Etienne Perret,et al.  Chipless RFID based on group delay encoding , 2011, 2011 IEEE International Conference on RFID-Technologies and Applications.

[21]  Luca Roselli,et al.  THEORY OF ZERO-POWER RFID SENSORS BASED ON HARMONIC GENERATION AND ORTHOGONALLY POLARIZED ANTENNAS , 2013 .

[22]  L. Roselli,et al.  Modeling and characterization of copper tape microstrips on paper substrate and application to 24 GHz branch-line couplers , 2013, 2013 European Microwave Conference.

[23]  A. J. Steckl,et al.  Circuits on cellulose , 2013, IEEE Spectrum.

[24]  S. Tedjini,et al.  High-Capacity Chipless RFID Tag Insensitive to the Polarization , 2012, IEEE Transactions on Antennas and Propagation.

[25]  S. Sarma,et al.  RFID Tag Antenna-Based Sensing for Pervasive Surface Crack Detection , 2013, IEEE Sensors Journal.

[26]  Yang Wang,et al.  Wireless crack sensing using an RFID-based folded patch antenna , 2012 .