Prospect and Reality of Ni‐Rich Cathode for Commercialization
暂无分享,去创建一个
Minjoon Park | Junhyeok Kim | Jaephil Cho | Hyungyeon Cha | Jaephil Cho | Moonsu Yoon | Junhyeok Kim | Minjoon Park | Hyungyeon Cha | Hyomyung Lee | Hyomyung Lee | Moonsu Yoon
[1] Zhen Chen,et al. Recent progress in surface coating of layered LiNixCoyMnzO2 for lithium-ion batteries , 2017 .
[2] K. Roh,et al. Li3PO4 surface coating on Ni-rich LiNi0.6Co0.2Mn0.2O2 by a citric acid assisted sol-gel method: Improved thermal stability and high-voltage performance , 2017 .
[3] Minjoon Park,et al. Self‐Induced Concentration Gradient in Nickel‐Rich Cathodes by Sacrificial Polymeric Bead Clusters for High‐Energy Lithium‐Ion Batteries , 2017 .
[4] Wangda Li,et al. Dynamic behaviour of interphases and its implication on high-energy-density cathode materials in lithium-ion batteries , 2017, Nature Communications.
[5] Jian Zhang,et al. Composition, structure, and performance of Ni-based cathodes in lithium ion batteries , 2017, Ionics.
[6] J. Park,et al. Improvement in high-voltage and high rate cycling performance of nickel-rich layered cathode materials via facile chemical vapor deposition with methane , 2017 .
[7] Zhen-guo Wu,et al. Effect of niobium doping on the structure and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode materials for lithium ion batteries , 2017 .
[8] Chunrui Xu,et al. Synthesis and characterization of Mo-doped LiNi0.5Co0.2Mn0.3O2 cathode materials prepared by a hydrothermal process , 2017 .
[9] H. Lee,et al. A first-principles study of the preventive effects of Al and Mg doping on the degradation in LiNi0.8Co0.1Mn0.1O2 cathode materials. , 2017, Physical chemistry chemical physics : PCCP.
[10] Zongping Shao,et al. LiNi0.29Co0.33Mn0.38O2 polyhedrons with reduced cation mixing as a high-performance cathode material for Li-ion batteries synthesized via a combined co-precipitation and molten salt heating technique , 2017 .
[11] Peter Lamp,et al. Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives , 2017 .
[12] Jeff Dahn,et al. Comparison of Single Crystal and Polycrystalline LiNi0.5Mn0.3Co0.2O2 Positive Electrode Materials for High Voltage Li-Ion Cells , 2017 .
[13] Doron Aurbach,et al. Review—Recent Advances and Remaining Challenges for Lithium Ion Battery Cathodes I. Nickel-Rich, LiNixCoyMnzO2 , 2017 .
[14] Arumugam Manthiram,et al. A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries , 2017 .
[15] M. Winter,et al. Degradation effects on the surface of commercial LiNi 0.5 Co 0.2 Mn 0.3 O 2 electrodes , 2016 .
[16] Young‐Jun Kim,et al. Capacity fading behavior of Ni-rich layered cathode materials in Li-ion full cells , 2016 .
[17] Chong Seung Yoon,et al. Compositionally Graded Cathode Material with Long‐Term Cycling Stability for Electric Vehicles Application , 2016 .
[18] Tongchao Liu,et al. Aligned Li+ Tunnels in Core-Shell Li(NixMnyCoz)O2@LiFePO4 Enhances Its High Voltage Cycling Stability as Li-ion Battery Cathode. , 2016, Nano letters.
[19] J. Janek,et al. On the gassing behavior of lithium-ion batteries with NCM523 cathodes , 2016, Journal of Solid State Electrochemistry.
[20] H. Wu,et al. Synthesis of Li2Si2O5-coated LiNi0.6Co0.2Mn0.2O2 cathode materials with enhanced high-voltage electrochemical properties for lithium-ion batteries , 2016 .
[21] Feng Wu,et al. Single-crystal LiNi0.6Co0.2Mn0.2O2 as high performance cathode materials for Li-ion batteries , 2016 .
[22] Zhixing Wang,et al. Influence of Mg2+ doping on the structure and electrochemical performances of layered LiNi0.6Co0.2-xMn0.2MgxO2 cathode materials , 2016 .
[23] Byung-Beom Lim,et al. Comparative Study of Ni-Rich Layered Cathodes for Rechargeable Lithium Batteries: Li[Ni0.85Co0.11Al0.04]O2 and Li[Ni0.84Co0.06Mn0.09Al0.01]O2 with Two-Step Full Concentration Gradients , 2016 .
[24] Remi Petibon,et al. Interactions between Positive and Negative Electrodes in Li-Ion Cells Operated at High Temperature and High Voltage , 2016 .
[25] Peter Lamp,et al. High-energy-density lithium-ion battery using a carbon-nanotube–Si composite anode and a compositionally graded Li[Ni0.85Co0.05Mn0.10]O2 cathode , 2016 .
[26] Aidong Li,et al. Improvement of electrochemical performance of nickel rich LiNi0.6Co0.2Mn0.2O2 cathode active material by ultrathin TiO2 coating. , 2016, Dalton transactions.
[27] Sang Kyu Kwak,et al. Enhancing Interfacial Bonding between Anisotropically Oriented Grains Using a Glue‐Nanofiller for Advanced Li‐Ion Battery Cathode , 2016, Advanced materials.
[28] K. Kang,et al. Improved electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode material synthesized by citric acid assisted sol-gel method for lithium ion batteries , 2016 .
[29] Fabio Albano,et al. Modification of Ni-Rich FCG NMC and NCA Cathodes by Atomic Layer Deposition: Preventing Surface Phase Transitions for High-Voltage Lithium-Ion Batteries , 2016, Scientific Reports.
[30] T. Masese,et al. Ionic Conduction in Lithium Ion Battery Composite Electrode Governs Cross-sectional Reaction Distribution , 2016, Scientific Reports.
[31] K. Yubuta,et al. Molybdate flux growth of idiomorphic Li(Ni1/3Co1/3Mn1/3)O2 single crystals and characterization of their capabilities as cathode materials for lithium-ion batteries , 2016 .
[32] Wangda Li,et al. Overcoming the chemical instability on exposure to air of Ni-rich layered oxide cathodes by coating with spinel LiMn1.9Al0.1O4 , 2016 .
[33] David H. K. Jackson,et al. Atomic Layer Deposition of Al2O3-Ga2O3 Alloy Coatings for Li[Ni0.5Mn0.3Co0.2]O2 Cathode to Improve Rate Performance in Li-Ion Battery. , 2016, ACS applied materials & interfaces.
[34] Takeshi Kimijima,et al. Growth Manner of Octahedral-Shaped Li(Ni1/3Co1/3Mn1/3)O2 Single Crystals in Molten Na2SO4 , 2016 .
[35] Zhixing Wang,et al. Investigation on the effect of Na doping on structure and Li-ion kinetics of layered LiNi0.6Co0.2Mn0.2O2 cathode material , 2016 .
[36] J. Dahn,et al. In Situ X-ray Diffraction Study of Layered Li-Ni-Mn-Co Oxides: Effect of Particle Size and Structural Stability of Core-Shell Materials , 2016 .
[37] J. Dahn,et al. Rapid Impedance Growth and Gas Production at the Li-Ion Cell Positive Electrode in the Absence of a Negative Electrode , 2016 .
[38] Yang-Kook Sun,et al. Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives , 2016 .
[39] Hajime Arai,et al. Factors determining the packing-limitation of active materials in the composite electrode of lithium-ion batteries , 2016 .
[40] Zhixing Wang,et al. Effect of Mg doping on the structural and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials , 2015 .
[41] J. Choi,et al. Self-Terminated Artificial SEI Layer for Nickel-Rich Layered Cathode Material via Mixed Gas Chemical Vapor Deposition , 2015 .
[42] Evan M. Erickson,et al. Li+‐Ion Extraction/Insertion of Ni‐Rich Li1+x(NiyCozMnz)wO2 (0.005 , 2015 .
[43] H. Wang,et al. Effects of fluorine doping on structure, surface chemistry, and electrochemical performance of LiNi0.8Co0.15Al0.05O2 , 2015 .
[44] M. Behm,et al. Effect of Cathode Slurry Composition on the Electrochemical Properties of Li-Ion Batteries , 2015 .
[45] Chong Seung Yoon,et al. Advanced Concentration Gradient Cathode Material with Two‐Slope for High‐Energy and Safe Lithium Batteries , 2015 .
[46] Jaephil Cho,et al. Countering Voltage Decay and Capacity Fading of Lithium‐Rich Cathode Material at 60 °C by Hybrid Surface Protection Layers , 2015 .
[47] Jaephil Cho,et al. Surface Mn Oxidation State Controlled Spinel LiMn2O4 as a Cathode Material for High‐Energy Li‐Ion Batteries , 2015 .
[48] Min-Joon Lee,et al. The role of nanoscale-range vanadium treatment in LiNi0.8Co0.15Al0.05O2 cathode materials for Li-ion batteries at elevated temperatures , 2015 .
[49] Sehee Lee,et al. The effect of energetically coated ZrOx on enhanced electrochemical performances of Li(Ni1/3Co1/3Mn1/3)O2 cathodes using modified radio frequency (RF) sputtering , 2015 .
[50] Dawei Song,et al. Understanding the Origin of Enhanced Performances in Core-Shell and Concentration-Gradient Layered Oxide Cathode Materials. , 2015, ACS applied materials & interfaces.
[51] Deyu Wang,et al. Improved cyclic stability of LiNi0.8Co0.1Mn0.1O2 via Ti substitution with a cut-off potential of 4.5 V , 2015 .
[52] D. Xiao,et al. Hydrogen peroxide assisted synthesis of LiNi1/3Co1/3Mn1/3O2 as high-performance cathode for lithium-ion batteries , 2015 .
[53] Min-Joon Lee,et al. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.
[54] Min Gyu Kim,et al. A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles. , 2015, Nano letters.
[55] Erik J. Berg,et al. Activation Mechanism of LiNi0.80Co0.15Al0.05O2: Surface and Bulk Operando Electrochemical, Differential Electrochemical Mass Spectrometry, and X-ray Diffraction Analyses , 2015 .
[56] J. Dahn,et al. Survey of Gas Expansion in Li-Ion NMC Pouch Cells , 2015 .
[57] L. Downie,et al. Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2 Cathode Material for Lithium Ion Batteries , 2015 .
[58] Evan M. Erickson,et al. Studies of Aluminum-Doped LiNi0.5Co0.2Mn0.3O2: Electrochemical Behavior, Aging, Structural Transformations, and Thermal Characteristics , 2015 .
[59] Kai-Xue Wang,et al. Surface and Interface Engineering of Electrode Materials for Lithium‐Ion Batteries , 2015, Advanced materials.
[60] Yangang Sun,et al. An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer , 2015, Nano Research.
[61] A. Bund,et al. A high performance layered transition metal oxide cathode material obtained by simultaneous aluminum and iron cationic substitution , 2014 .
[62] J. Dahn,et al. Effect of Sulfate Electrolyte Additives on LiNi1/3Mn1/3Co1/3O2/Graphite Pouch Cell Lifetime: Correlation between XPS Surface Studies and Electrochemical Test Results , 2014 .
[63] Xiqian Yu,et al. Structural changes and thermal stability of charged LiNixMnyCozO₂ cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy. , 2014, ACS applied materials & interfaces.
[64] X. Zhang,et al. Ultrathin ZnO coating for improved electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material , 2014 .
[65] Sang Gun Lee,et al. Effect of electrode compression on the wettability of lithium-ion batteries , 2014 .
[66] Bin Huang,et al. Synthesis of Mg-doped LiNi0.8Co0.15Al0.05O2 oxide and its electrochemical behavior in high-voltage lithium-ion batteries , 2014 .
[67] Masahiro Kinoshita,et al. Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges) , 2014 .
[68] Xunhui Xiong,et al. Enhanced electrochemical properties of a LiNiO2-based cathode material by removing lithium residues with (NH4)2HPO4 , 2014 .
[69] Zhi-guo Liu,et al. Molten Salt Synthesis of Bismuth Ferrite Nano‐ and Microcrystals and their Structural Characterization , 2014 .
[70] Baojun Chen,et al. An approach to application for LiNi0.6Co0.2Mn0.2O2 cathode material at high cutoff voltage by TiO2 coating , 2014 .
[71] Jonathan J. Travis,et al. Unexpected high power performance of atomic layer deposition coated Li[Ni1/3Mn1/3Co1/3]O2 cathodes , 2014 .
[72] Feng Lin,et al. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries , 2014, Nature Communications.
[73] Gerbrand Ceder,et al. Unlocking the Potential of Cation-Disordered Oxides for Rechargeable Lithium Batteries , 2014, Science.
[74] Xueliang Sun,et al. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application , 2014 .
[75] Yang‐Kook Sun,et al. Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2 , 2014 .
[76] Haegyeom Kim,et al. Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries , 2014 .
[77] J. Tu,et al. Morphology and electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode materials treated in molten salts , 2013 .
[78] Yongseon Kim. Mechanism of gas evolution from the cathode of lithium-ion batteries at the initial stage of high-temperature storage , 2013, Journal of Materials Science.
[79] Stefano Meini,et al. Rechargeability of Li-air cathodes pre-filled with discharge products using an ether-based electrolyte solution: implications for cycle-life of Li-air cells. , 2013, Physical chemistry chemical physics : PCCP.
[80] M. Anouti,et al. Low pressure carbon dioxide solubility in lithium-ion batteries based electrolytes as a function of temperature. Measurement and prediction , 2013 .
[81] Yongseon Kim. Encapsulation of LiNi0.5Co0.2Mn0.3O2 with a thin inorganic electrolyte film to reduce gas evolution in the application of lithium ion batteries. , 2013, Physical chemistry chemical physics : PCCP.
[82] Yongseon Kim. Investigation of the gas evolution in lithium ion batteries: effect of free lithium compounds in cathode materials , 2013, Journal of Solid State Electrochemistry.
[83] Jaephil Cho,et al. A new type of protective surface layer for high-capacity Ni-based cathode materials: nanoscaled surface pillaring layer. , 2013, Nano letters.
[84] Xiqian Yu,et al. Cathode Materials: Combining In Situ Synchrotron X‐Ray Diffraction and Absorption Techniques with Transmission Electron Microscopy to Study the Origin of Thermal Instability in Overcharged Cathode Materials for Lithium‐Ion Batteries (Adv. Funct. Mater. 8/2013) , 2013 .
[85] Jun Liu,et al. Materials Science and Materials Chemistry for Large Scale Electrochemical Energy Storage: From Transportation to Electrical Grid , 2013 .
[86] Peng Lu,et al. Unexpected Improved Performance of ALD Coated LiCoO2/Graphite Li‐Ion Batteries , 2013 .
[87] Xiqian Yu,et al. Correlating Structural Changes and Gas Evolution during the Thermal Decomposition of Charged LixNi0.8Co0.15Al0.05O2 Cathode Materials , 2013 .
[88] Huajun Guo,et al. Washing effects on electrochemical performance and storage characteristics of LiNi0.8Co0.1Mn0.1O2 as cathode material for lithium-ion batteries , 2013 .
[89] J. Dahn,et al. Effects of Electrode Density on the Safety of NCA Positive Electrode for Li-Ion Batteries , 2013 .
[90] Chong Seung Yoon,et al. Nanostructured high-energy cathode materials for advanced lithium batteries. , 2012, Nature materials.
[91] Yang-Kook Sun,et al. Challenges facing lithium batteries and electrical double-layer capacitors. , 2012, Angewandte Chemie.
[92] Oleg Borodin,et al. Oxidation induced decomposition of ethylene carbonate from DFT calculations--importance of explicitly treating surrounding solvent. , 2012, Physical chemistry chemical physics : PCCP.
[93] J. Flake,et al. Low temperature preparation of crystalline ZrO2 coatings for improved elevated-temperature performances of Li-ion battery cathodes. , 2012, Chemical communications.
[94] Seung-Don Choi,et al. The Current Move of Lithium Ion Batteries Towards the Next Phase , 2012 .
[95] Yongseon Kim. Lithium nickel cobalt manganese oxide synthesized using alkali chloride flux: morphology and performance as a cathode material for lithium ion batteries. , 2012, ACS applied materials & interfaces.
[96] H. zur Loye,et al. Materials discovery by flux crystal growth: quaternary and higher order oxides. , 2012, Angewandte Chemie.
[97] D. Kisailus,et al. Crystal Growth of Li[Ni1/3Co1/3Mn1/3]O2 as a Cathode Material for High-Performance Lithium Ion Batteries , 2012 .
[98] J. Kenny,et al. Ablative properties of carbon black and MWNT/phenolic composites: A comparative study , 2012 .
[99] A. West,et al. The Effect on Cathode Performance of Oxygen Non-Stoichiometry and Interlayer Mixing in Layered Rock Salt LiNi0.8Mn0.1Co0.1O2-δ , 2012 .
[100] Jaephil Cho,et al. Spinel‐Layered Core‐Shell Cathode Materials for Li‐Ion Batteries , 2011 .
[101] K. Yubuta,et al. Growth of Well-Developed Li4Ti5O12 Crystals by the Cooling of a Sodium Chloride Flux , 2011 .
[102] Jang-Kyo Kim,et al. Microscopically porous, interconnected single crystal LiNi1/3Co1/3Mn1/3O2 cathode material for Lithium ion batteries , 2011 .
[103] Zhenping Cheng,et al. A novel approach to modify poly(vinylidene fluoride) via iron-mediated atom transfer radical polymerization using activators generated by electron transfer , 2011 .
[104] P. Bruce,et al. Reactions in the rechargeable lithium-O2 battery with alkyl carbonate electrolytes. , 2011, Journal of the American Chemical Society.
[105] Ping Liu,et al. Electrochemical effects of ALD surface modification on combustion synthesized LiNi1/3Mn1/3Co1/3O2 as a layered-cathode material , 2011 .
[106] Xu Yu,et al. Synthesis of LiNi1/3Co1/3Al1/3O2 cathode material with eutectic molten salt LiOH-LiNO3 , 2011 .
[107] S. Trussler,et al. A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers , 2011 .
[108] Doron Aurbach,et al. On the Surface Chemistry of LiMO2 Cathode Materials (M = [ MnNi ] and [MnNiCo]): Electrochemical, Spectroscopic, and Calorimetric Studies , 2010 .
[109] K. Yubuta,et al. Environmentally Friendly Growth of Well-Developed LiCoO2 Crystals for Lithium-Ion Rechargeable Batteries Using a NaCl Flux , 2010 .
[110] C. Coutanceau,et al. A thermogravimetric analysis/mass spectroscopy study of the thermal and chemical stability of carbon in the Pt/C catalytic system , 2010 .
[111] Jaephil Cho,et al. Significant Improvement of LiNi0.8Co0.15Al0.05O2 Cathodes at 60 ° C by SiO2 Dry Coating for Li-Ion Batteries , 2010 .
[112] Ju-tang Sun,et al. Preparation and electrochemical characterization of single-crystalline spherical LiNi1/3Co1/3Mn1/3O2 powders cathode material for Li-ion batteries , 2010 .
[113] B. Scrosati,et al. Lithium batteries: Status, prospects and future , 2010 .
[114] Z. Bakenov,et al. Preparation of carbon coated LiMnPO4 powders by a combination of spray pyrolysis with dry ball-milling followed by heat treatment , 2010 .
[115] Chong Seung Yoon,et al. A Novel Cathode Material with a Concentration‐Gradient for High‐Energy and Safe Lithium‐Ion Batteries , 2010 .
[116] Linda F. Nazar,et al. Positive Electrode Materials for Li-Ion and Li-Batteries† , 2010 .
[117] S. George. Atomic layer deposition: an overview. , 2010, Chemical reviews.
[118] Weishan Li,et al. Theoretical investigations on oxidative stability of solvents and oxidative decomposition mechanism of ethylene carbonate for lithium ion battery use. , 2009, The journal of physical chemistry. B.
[119] Stephen J. Harris,et al. Solubility of Lithium Salts Formed on the Lithium-Ion Battery Negative Electrode Surface in Organic Solvents , 2009 .
[120] Tsuyoshi Sasaki,et al. Capacity-Fading Mechanisms of LiNiO2-Based Lithium-Ion Batteries I. Analysis by Electrochemical and Spectroscopic Examination , 2009 .
[121] Ilias Belharouak,et al. High-energy cathode material for long-life and safe lithium batteries. , 2009, Nature materials.
[122] P. Biensan,et al. The Effect of Vinylene Carbonate Additive on Surface Film Formation on Both Electrodes in Li-Ion Batteries , 2009 .
[123] Shinichi Kinoshita,et al. Identification of the Source of Evolved Gas in Li-Ion Batteries Using #2#1 -labeled Solvents , 2008 .
[124] Feng Wu,et al. Synthesis and Characterization of Nonspherical LiCoO2 with High Tap Density by Two-Step Drying Method , 2008 .
[125] Jaephil Cho,et al. Dependence of Electrochemical Behavior on Concentration and Annealing Temperature of Li x CoPO4 Phase-Grown LiNi0.8Co0.16Al0.04O2 Cathode Materials , 2008 .
[126] M. Armand,et al. Building better batteries , 2008, Nature.
[127] K. Amine,et al. Thermal behavior of delithiated Li(Ni0.8Co0.15Al0.05)O2 and Li1.1(Ni1/3Co1/3Mn1/3)0.9O2 powders , 2007 .
[128] R. Dominko,et al. Morphology and electrical properties of conductive carbon coatings for cathode materials , 2007 .
[129] Yoshiyasu Saito,et al. Investigation of positive electrodes after cycle testing of high-power Li-ion battery cells: III: An approach to the power fade mechanism using FT-IR-ATR , 2007 .
[130] Yong Yang,et al. Reaction mechanism and kinetics of lithium ion battery cathode material LiNiO2 with CO2 , 2007 .
[131] Junwei Jiang,et al. The reactivity of delithiated Li(Ni1/3Co1/3Mn1/3)O2, Li(Ni0.8Co0.15Al0.05)O2 or LiCoO2 with non-aqueous electrolyte , 2007 .
[132] Jaephil Cho,et al. Lithium-Reactive Co3 ( PO4 ) 2 Nanoparticle Coating on High-Capacity LiNi0.8Co0.16Al0.04O2 Cathode Material for Lithium Rechargeable Batteries , 2007 .
[133] Y. Meng,et al. Phase Transitions in the LiNi0.5Mn0.5O2 System with Temperature , 2007 .
[134] K. Amine,et al. Thermal Stability of the Li ( Ni0.8Co0.15Al0.05 ) O2 Cathode in the Presence of Cell Components , 2006 .
[135] Yang-Kook Sun,et al. Synthesis of Spherical Nano- to Microscale Core−Shell Particles Li[(Ni0.8Co0.1Mn0.1)1-x(Ni0.5Mn0.5)x]O2 and Their Applications to Lithium Batteries , 2006 .
[136] Xiao‐Qing Yang,et al. A study on the newly observed intermediate structures during the thermal decomposition of nickel-based layered cathode materials using time-resolved XRD , 2006 .
[137] Min Gyu Kim,et al. Structural Characterization of the Surface-Modified Li x Ni0.9Co0.1O2 Cathode Materials by MPO4 Coating (M = Al , Ce, SrH, and Fe) for Li-Ion Cells , 2006 .
[138] Chong Seung Yoon,et al. Novel core-shell-structured Li[(Ni0.8Co0.2)0.8(Ni0.5Mn0.5)0.2]O2 via coprecipitation as positive electrode material for lithium secondary batteries. , 2006, The journal of physical chemistry. B.
[139] Ying Shirley Meng,et al. Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries , 2006, Science.
[140] Ilias Belharouak,et al. Safety characteristics of Li(Ni0.8Co0.15Al0.05)O2 and Li(Ni1/3Co1/3Mn1/3)O2 , 2006 .
[141] Min Gyu Kim,et al. Washing Effect of a LiNi0.83Co0.15Al0.02O2 Cathode in Water , 2006 .
[142] Robert Kostecki,et al. Diagnostic Evaluation of Detrimental Phenomena in High-Power Lithium-Ion Batteries , 2005 .
[143] Yang-Kook Sun,et al. Synthesis and characterization of Li[(Ni0.8Co0.1Mn0.1)0.8(Ni0.5Mn0.5)0.2]O2 with the microscale core-shell structure as the positive electrode material for lithium batteries. , 2005, Journal of the American Chemical Society.
[144] M. Manzoli,et al. Characterisation of Co-based electrocatalytic materials for O2 reduction in fuel cells , 2005 .
[145] Kristina Edström,et al. The cathode-electrolyte interface in the Li-ion battery , 2004 .
[146] Jaephil Cho,et al. Synthesis, Thermal, and Electrochemical Properties of AlPO4-Coated LiNi0.8Co0.1Mn0.1 O 2 Cathode Materials for a Li-Ion Cell , 2004 .
[147] G. Ceder,et al. Role of electronic structure in the susceptibility of metastable transition-metal oxide structures to transformation. , 2004, Chemical reviews.
[148] Guoying Chen,et al. Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power , 2004 .
[149] J. Dahn,et al. Effects of particle size and electrolyte salt on the thermal stability of Li0.5CoO2 , 2004 .
[150] G. L. Henriksen,et al. Aluminum-doped lithium nickel cobalt oxide electrodes for high-power lithium-ion batteries , 2004 .
[151] S. Oishi,et al. Flux growth of hexagonal bipyramidal ruby crystals. , 2004, Journal of the American Chemical Society.
[152] Yong Yang,et al. A comparative study of LiNi0.8Co0.2O2 cathode materials modified by lattice-doping and surface-coating , 2004 .
[153] J. Dahn,et al. Synthesis, Characterization, and Electrochemical Behavior of Improved Li [ Ni x Co1 − 2x Mn x ] O 2 ( 0.1 ⩽ x ⩽ 0.5 ) , 2003 .
[154] John B. Kerr,et al. The role of Li-ion battery electrolyte reactivity in performance decline and self-discharge , 2003 .
[155] D. D. MacNeil,et al. Can an Electrolyte for Lithium-Ion Batteries Be Too Stable? , 2003 .
[156] Doron Aurbach,et al. On the capacity fading of LiCoO2 intercalation electrodes:: the effect of cycling, storage, temperature, and surface film forming additives , 2002 .
[157] D. D. MacNeil,et al. The Reactions of Li0.5CoO2 with Nonaqueous Solvents at Elevated Temperatures , 2002 .
[158] T. Wen,et al. Studies on processable conducting blend of poly(diphenylamine) and poly(vinylidene fluoride) , 2002 .
[159] D. D. MacNeil,et al. The Reaction of Charged Cathodes with Nonaqueous Solvents and Electrolytes: I. Li0.5CoO2 , 2001 .
[160] Tae-Joon Kim,et al. High-Performance ZrO2-Coated LiNiO2 Cathode Material , 2001 .
[161] M. Hon,et al. Crystallization mechanism of LiNiO2 synthesized by Pechini method , 2001 .
[162] D. Aurbach. Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries , 2000 .
[163] P. Biensan,et al. Synthesis and Characterization of New LiNi1 − y Mg y O 2 Positive Electrode Materials for Lithium‐Ion Batteries , 2000 .
[164] I. Uchida,et al. In Situ Observation of LiNiO2 Single‐Particle Fracture during Li ‐ Ion Extraction and Insertion , 1999 .
[165] S. Okada,et al. Thermal behavior of Li1-yNiO2 and the decomposition mechanism , 1998 .
[166] Jun-Hong Park,et al. Transition of the Particle‐Growth Mechanism with Temperature Variation in the Molten‐Salt Method , 1996 .
[167] Tsutomu Ohzuku,et al. Synthesis and Characterization of LiAl1 / 4Ni3 / 4 O 2 ( R 3̄m ) for Lithium‐Ion (Shuttlecock) Batteries , 1995 .
[168] D. Aurbach,et al. The Study of Electrolyte Solutions Based on Ethylene and Diethyl Carbonates for Rechargeable Li Batteries I . Li Metal Anodes , 1995 .
[169] J. Dahn,et al. Thermal stability of LixCoO2, LixNiO2 and λ-MnO2 and consequences for the safety of Li-ion cells , 1994 .
[170] D. Aurbach,et al. The Correlation Between the Surface Chemistry and the Performance of Li‐Carbon Intercalation Anodes for Rechargeable ‘Rocking‐Chair’ Type Batteries , 1994 .
[171] Toshio Kimura,et al. Preparation of rod-shaped BaTiO3 powder , 1986 .
[172] Toshio Kimura,et al. Morphology of Bi2WO6 powders obtained in the presence of fused salts , 1982 .