Dynamic life cycle carbon and energy analysis for cross-laminated timber in the Southeastern United States

[1]  Pulp Chip Production Potentials at Indiana Sawmills , 1900 .

[2]  W. Doolittle.  Site Index Comparisons for Several Forest Species in the Southern Appalachians1 , 1958 .

[3]  P H Steele,et al.  Factors Determining Lumber Recovery in Sawmilling. , 1984 .

[4]  J. D. Hodges,et al.  Thinning Practices in Southern Pines- With Pest Management Recommendations , 1985 .

[5]  C. W. McMillin,et al.  Moisture Content and Specific Gravity of The Four Major Southern Pines Under The Same Age and Site Conditions , 1986 .

[6]  A. Clark,et al.  Bulk density of southern pine logs , 1988 .

[7]  F. G. Wagner,et al.  Low lumber recovery at southern pine sawmills may be due to misshapen sawlogs , 1993 .

[8]  S. Kellomäki,et al.  Role of wood-based products in absorbing atmospheric carbon , 1994 .

[9]  D. Zavala.  The effect of log length and lumber thickness over-allowance on lumber recovery , 1995 .

[10]  Antti Asikainen,et al.  Greenhouse gas emissions from the use of primary energy in forest operations and long-distance transportation of timber in Finland , 1996 .

[11]  X. Yin.  The decay of forest woody debris: numerical modeling and implications based on some 300 data cases from North America , 1999, Oecologia.

[12]  H. L. Allen,et al.  Modeling response to midrotation nitrogen and phosphorus fertilization in loblolly pine plantations. , 2000 .

[13]  J. Chambers,et al.  Respiration from coarse wood litter in central Amazon forests , 2001 .

[14]  Eini C. Lowell,et al.  Lumber recovery from small-diameter ponderosa pine from Flagstaff, Arizona , 2001 .

[15]  Lumber recovery studies of Alaska sawmills, 1997 to 1999. , 2002 .

[16]  P. Doruska,et al.  Weight and bulk density of loblolly pine plywood logs in southeast Arkansas , 2004 .

[17]  Michael R. Milota,et al.  Gate-to-Gate Life-Cycle Inventory of Softwood Lumber Production , 2005 .

[18]  E. O. Onuorah.  Properties of fibreboards made from oil palm (Elaeis guineensis) stem and/or mixed tropical hardwood sawmill residues. , 2005 .

[19]  Weimin Wang,et al.  Applying multi-objective genetic algorithms in green building design optimization , 2005 .

[20]  D. Markewitz.  Fossil fuel carbon emissions from silviculture: Impacts on net carbon sequestration in forests , 2006 .

[21]  W. D. Greene,et al.  Utilizing forest biomass by adding a small chipper to a tree-length southern pine harvesting operation. , 2007 .

[22]  S. Pang,et al.  VARIATION IN ANISOTROPIC SHRINKAGE OF PLANTATION-GROWN PINUS RADIATA WOOD , 2008 .

[23]  Andrea Frangi,et al.  Experimental analysis of cross-laminated timber panels in fire , 2009 .

[24]  Radomir Klvac,et al.  Characteristic fuel consumption and exhaust emissions in fully mechanized logging operations , 2009, Journal of Forest Research.

[25]  Sara González-García,et al.  Environmental impacts of forest production and supply of pulpwood: Spanish and Swedish case studies , 2009 .

[26]  Model development for lumber volume recovery of natural balsam fir trees in Quebec, Canada. , 2009 .

[27]  P. Dwivedi,et al.  Impact of carbon value on the profitability of slash pine plantations in the southern United States: an integrated life cycle and Faustmann analysis , 2009 .

[28]  Shu-yin Zhang,et al.  Impact of precommercial thinning on tree growth, lumber recovery and lumber quality in Abies balsamea , 2009 .

[29]  Bruce Lippke,et al.  Life-Cycle Impacts of Inland Northwest and Northeast/North Central Forest Resources , 2010 .

[30]  Chai Xiaoli,et al.  Characteristics of environmental factors and their effects on CH4 and CO2 emissions from a closed landfill: an ecological case study of Shanghai. , 2010, Waste management.

[31]  Todd A. Morgan,et al.  Trends in Lumber Processing in the Western United States. Part II: Overrun and Lumber Recovery Factors , 2010 .

[32]  Robert J. Ross,et al.  Wood handbook : wood as an engineering material , 2010 .

[33]  Leif Gustavsson,et al.  Life cycle primary energy use and carbon emission of an eight-storey wood-framed apartment building , 2010 .

[34]  Jochen Köhler,et al.  Fire-exposed cross-laminated timber – modelling and tests , 2010 .

[35]  Scott A. Bowe,et al.  Environmental Impact of Manufacturing Softwood Lumber in Northeastern and North Central United States , 2010 .

[36]  M. V. Gil,et al.  Influence of storage time on the quality and combustion behaviour of pine woodchips , 2010 .

[37]  Maureen E. Puettmann,et al.  Life Cycle Inventory of Softwood Lumber from the Inland Northwest US , 2010 .

[38]  S. Mani,et al.  Drying characteristics of pine forest residues , 2009, BioResources.

[39]  Richard J. Murphy,et al.  Energy and greenhouse gas balance of the use of forest residues for bioenergy production in the UK. , 2011 .

[40]  Seppo Kellomäki,et al.  Impacts of initial stand density and thinning regimes on energy wood production and management-related CO2 emissions in boreal ecosystems , 2011, European Journal of Forest Research.

[41]  Diego Elustondo,et al.  Energy Consumption in Industrial Drying of Radiata Pine , 2012 .

[42]  S. Mani,et al.  Impact of torrefaction on the grindability and fuel characteristics of forest biomass. , 2011, Bioresource technology.

[43]  Seppo Kellomäki,et al.  Life cycle assessment tool for estimating net CO2 exchange of forest production , 2011 .

[44]  T. Decaëns,et al.  Soil detritivore macro-invertebrate assemblages throughout a managed beech rotation , 2007, Annals of Forest Science.

[45]  Bryce J. Stokes,et al.  U.S. Billion-ton Update: Biomass Supply for a Bioenergy and Bioproducts Industry , 2011 .

[46]  Frank Lam,et al.  A Comparative Cradle-to-Gate Life Cycle Assessment of Mid-Rise Office Building Construction Alternatives: Laminated Timber or Reinforced Concrete , 2012 .

[47]  Seppo Junnila,et al.  A scenario analysis of the life cycle greenhouse gas emissions of a new residential area , 2012 .

[48]  Maureen E. Puettmann,et al.  Life-cycle assessment of bioethanol from pine residues via indirect biomass gasification to mixed alcohols. , 2012 .

[49]  Anders Ågren,et al.  On the uncertainty of building acoustic measurements – Case study of a cross-laminated timber construction , 2012 .

[50]  Daniel M. Kammen,et al.  Life cycle analysis of distributed concentrating solar combined heat and power: economics, global warming potential and water , 2012 .

[51]  Bruce Lippke,et al.  Modeling biomass collection and woods processing life-cycle analysis. , 2012 .

[52]  Trends in Lumber Processing in the Western United States. Part III: Residue Recovered versus Lumber Produced , 2012 .

[53]  Robert H. Crawford,et al.  Life cycle greenhouse gas emissions and energy analysis of prefabricated reusable building modules , 2012 .

[54]  Shawn T. Grushecky,et al.  ECONOMICS OF MERCHANDISING PULPWOOD IN WEST VIRGINIA , 2012 .

[55]  Damon S. Hartley,et al.  A Life Cycle Analysis of Forest Carbon Balance and Carbon Emissions of Timber Harvesting in West Virginia , 2013 .

[56]  Guiping Hu,et al.  Life cycle assessment of the production of hydrogen and transportation fuels from corn stover via fast pyrolysis , 2013 .

[57]  Robert H. Falk,et al.  Life-Cycle Energy and GHG Emissions for New and Recovered Softwood Framing Lumber and Hardwood Flooring Considering End-of-Life Scenarios , 2013 .

[58]  Corinne Le Quéré,et al.  Climate Change 2013: The Physical Science Basis , 2013 .

[59]  A. Rouboa,et al.  Using a two-stage equilibrium model to simulate oxygen air enriched gasification of pine biomass residues , 2013 .

[60]  J. Valverde,et al.  Thermogravimetric-mass spectrometric analysis on combustion of lignocellulosic biomass. , 2013, Bioresource Technology.

[61]  Dimitris Athanassiadis,et al.  Fuel, Hydraulic Oil and Lubricant Consumption in Swedish Mechanized Harvesting Operations, 1996 , 2013 .

[62]  Félix A. López,et al.  Textural and fuel characteristics of the chars produced by the pyrolysis of waste wood, and the properties of activated carbons prepared from them. , 2013 .

[63]  Pascal Lesage,et al.  Biogenic Carbon and Temporary Storage Addressed with Dynamic Life Cycle Assessment , 2013 .

[64]  Ash Deposition and Fouling Tendency of Two Energy Crops (Cynara and Poplar) and a Forest Residue (Pine Chips) Co-fired with Coal in a Pulverized Fuel Pilot Plant , 2013 .

[65]  May Wu,et al.  The water footprint of biofuel produced from forest wood residue via a mixed alcohol gasification process , 2013 .

[66]  Robert Bailis,et al.  Potential greenhouse gas benefits of transatlantic wood pellet trade , 2014 .

[67]  Mariefel V. Olarte,et al.  Pyrolysis of Woody Residue Feedstocks: Upgrading of Bio-oils from Mountain-Pine-Beetle-Killed Trees and Hog Fuel , 2014 .

[68]  Behzad Fatahi,et al.  Fully Nonlinear versus Equivalent Linear Computation Method for Seismic Analysis of Midrise Buildings on Soft Soils , 2014 .

[69]  Arijit Sinha,et al.  Viability of Hybrid Poplar in ANSI Approved Cross-Laminated Timber Applications , 2014 .

[70]  Omar A Espinoza,et al.  Outlook for Cross-Laminated Timber in the United States , 2014 .

[71]  Gongliang Wang,et al.  Investigation on ash deposit formation during the co-firing of coal with agricultural residues in a large-scale laboratory furnace , 2014 .

[72]  Shawn T. Grushecky,et al.  Motor-Based Energy Consumption in West Virginia Sawmills , 2014 .

[73]  Daniel P. Hindman,et al.  Mechanical Properties of Southern Pine Cross-Laminated Timber , 2015 .

[74]  P. Miles.  Specific Gravity and Other Properties of Wood and Bark for 156 Tree Species Found in North America , 2015 .

[75]  Richard F. Daniels,et al.  Whole-tree bark and wood properties of loblolly pine from intensively managed plantations , 2015 .

[76]  Bo Xiao,et al.  Characteristics and kinetic study on pyrolysis of five lignocellulosic biomass via thermogravimetric analysis. , 2015, Bioresource technology.

[77]  R. Brandner,et al.  Cross laminated timber (CLT): overview and development , 2015, European Journal of Wood and Wood Products.

[78]  Richard A. Venditti,et al.  Dynamic greenhouse gas accounting for cellulosic biofuels: implications of time based methodology decisions , 2017, The International Journal of Life Cycle Assessment.

[79]  Wen-Shao Chang,et al.  Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach , 2016 .

[80]  M. Pavel,et al.  Economic and life cycle environmental optimization of forest-based biorefinery supply chains for bioenergy and biofuel production , 2016 .

[81]  Marjan Popovski,et al.  Performance of a 2-Story CLT House Subjected to Lateral Loads , 2016 .

[82]  Ben Dooley,et al.  An assessment of the torrefaction of North American pine and life cycle greenhouse gas emissions , 2016 .

[83]  James M. Ricles,et al.  Cross-Laminated Timber for Seismic Regions: Progress and Challenges for Research and Implementation , 2016 .

[84]  Blake Larkin.  Effective Bonding Parameters for Hybrid Cross-Laminated Timber (CLT) , 2017 .

[85]  Yuan Wang,et al.  Green building evaluation from a life-cycle perspective in Australia: A critical review , 2017 .

[86]  Luca Evangelisti,et al.  A review of structural, thermo-physical, acoustical, and environmental properties of wooden materials for building applications , 2017 .

[87]  Michael Klippel,et al.  Design of Cross-Laminated Timber in Fire , 2017 .

[88]  Mengzhe Gu.  Strength and Serviceability Performances of Southern Yellow Pine Cross-Laminated Timber (CLT) and CLT-Glulam Composite Beam , 2017 .

[89]  T. Gallagher,et al.  An Economic Analysis of Incorporating Biomass Thinning into Loblolly Pine Plantations in Alabama , 2017 .

[90]  Daniel P. Hindman,et al.  Effect of manufacturing parameters on mechanical properties of southern yellow pine cross laminated timbers. , 2017 .

[91]  Mário Costa,et al.  Unresolved Issues on the Kinetic Modeling of Pyrolysis of Woody and Nonwoody Biomass Fuels , 2017 .

[92]  Lumber Recovery From Ponderosa Pine in the Black Hills, South Dakota , 2018 .

[93]  A. Vega,et al.  Characterization and Structural Performance in Bending of CLT Panels Made from Small-Diameter Logs of Loblolly/Slash Pine , 2018, Materials.

[94]  Richard D. Bergman,et al.  Life cycle assessment and environmental building declaration for the design building at the University of Massachusetts , 2018 .

[95]  Massimo Fragiacomo,et al.  Seismic design of a six-storey CLT building in Italy , 2018, Engineering Structures.

[96]  R. Houghton,et al.  Climate, economic, and environmental impacts of producing wood for bioenergy , 2018 .

[97]  John Sessions,et al.  Waste To Wisdom: Utilizing Forest Residues for the Production of Bioenergy and Biobased Products , 2018 .

[98]  J. D. Dolan,et al.  Techno-economic analysis for manufacturing cross-laminated timber , 2019, BioResources.

[99]  Indroneil Ganguly,et al.  Life Cycle Assessment (LCA) of Cross-Laminated Timber (CLT) Produced in Western Washington: The Role of Logistics and Wood Species Mix , 2019, Sustainability.

[100]  Allan Manalo,et al.  Out-of-grade sawn pine: A state-of-the-art review on challenges and new opportunities in cross laminated timber (CLT) , 2019, Construction and Building Materials.

[101]  Thales A. P. West,et al.  Can timber provision from Amazonian production forests be sustainable? , 2019, Environmental Research Letters.

[102]  Yang Chen,et al.  Assessment of Energy Saving Potential by Replacing Conventional Materials by Cross Laminated Timber (CLT)—A Case Study of Office Buildings in China , 2019 .

[103]  Kai Lan,et al.  Life Cycle Analysis of Decentralized Preprocessing Systems for Fast Pyrolysis Biorefineries with Blended Feedstocks in the Southeastern United States , 2020, Energy Technology.

[104]  Melissa M. Bilec,et al.  Comparative whole-building life cycle assessment of renovation and new construction , 2019, Building and Environment.