Influence of filler size on the properties of poly(lactic acid) (PLA)/graphene nanoplatelet (GNP) nanocomposites

Abstract Poly(lactic acid) (PLA) composites reinforced with two types of graphite nanoplatelets varying in lateral size - small (GNP-S) and large (GNP-L) - were produced via melt compounding. Morphological, thermal, mechanical, and electrical properties were investigated to reveal the influence of particle size. Electron microscopy and X-ray diffraction showed well dispersed small GNP-S particles up to 10 wt.% loading, while large GNP-L particles started to agglomerate at loadings ⩾7 wt.%. Addition of GNPs improved the Young’s modulus of the composites by 10% and 24% for small and large nanoplatelets, respectively, the latter being among the highest reported for PLA/GNP systems. For GNP-L this larger increase could be partly explained by an increase in crystallinity while no such effect was observed for GNP-S. Conversely, GNP-L systems showed embrittlement while polymer yield was preserved for GNP-S. GNP-L resulted in a lower electrical percolation threshold. However, systems based on smaller GNP-S particles showed significantly enhanced conductivity and a reduction in percolation threshold after annealing. Heat distortion temperature (HDT) increased by up to 13 °C, with large GNP-L showing the slightly larger increase.

[1]  W. Blau,et al.  Electrical and rheological percolation of PMMA/MWCNT nanocomposites as a function of CNT geometry and functionality , 2010 .

[2]  P. Pötschke,et al.  Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix , 2008 .

[3]  I. Alig,et al.  Destruction and formation of a conductive carbon nanotube network in polymer melts: In-line experiments , 2008 .

[4]  Wan Md Zin Wan Yunus,et al.  Poly(lactic acid)/Poly(ethylene glycol) Polymer Nanocomposites: Effects of Graphene Nanoplatelets , 2013 .

[5]  Hugh Alan Bruck,et al.  Conductivity enhancement of carbon nanotube and nanofiber-based polymer nanocomposites by melt annealing , 2008 .

[6]  K. Novoselov,et al.  The mechanics of graphene nanocomposites: A review , 2012 .

[7]  J. Coleman,et al.  Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites , 2002 .

[8]  Said Ahzi,et al.  Experimental and multiscale modeling of thermal conductivity and elastic properties of PLA/expanded graphite polymer nanocomposites , 2013 .

[9]  A. Melezhyk,et al.  Percolation behaviour of ultrahigh molecular weight polyethylene/multi-walled carbon nanotubes composites , 2007 .

[10]  Yushen Jin,et al.  Graphene oxide modified PLA microcapsules containing gold nanoparticles for ultrasonic/CT bimodal imaging guided photothermal tumor therapy. , 2013, Biomaterials.

[11]  P. Dubois,et al.  The production and properties of polylactide composites filled with expanded graphite , 2010 .

[12]  Il-hwan Kim,et al.  Polylactide/Exfoliated Graphite Nanocomposites with Enhanced Thermal Stability, Mechanical Modulus, and Electrical Conductivity , 2010 .

[13]  F. Stavale,et al.  Quantifying defects in graphene via Raman spectroscopy at different excitation energies. , 2011, Nano letters.

[14]  A. Dasari,et al.  Chemical and thermal reduction of graphene oxide and its electrically conductive polylactic acid nanocomposites , 2012 .

[15]  Wolfgang Bauhofer,et al.  A review and analysis of electrical percolation in carbon nanotube polymer composites , 2009 .

[16]  Chaobin He,et al.  Synthesis and Stereocomplex Crystallization of Poly(lactide)-Graphene Oxide Nanocomposites. , 2012, ACS macro letters.

[17]  Donald Garlotta,et al.  A Literature Review of Poly(Lactic Acid) , 2001 .

[18]  S. Cao,et al.  Strong and ductile poly(lactic acid) nanocomposite films reinforced with alkylated graphene nanosheets , 2015 .

[19]  A. Mohanty,et al.  Advances in the Properties of Polylactides Based Materials: A Review , 2007 .

[20]  T. Peijs,et al.  Preparation and properties of self-reinforced poly(lactic acid) composites based on oriented tapes , 2015 .

[21]  Wan Md Zin Wan Yunus,et al.  Reinforcement of graphene nanoplatelets on plasticized poly(lactic acid) nanocomposites: Mechanical, thermal, morphology, and antibacterial properties , 2014 .

[22]  Youssef Habibi,et al.  Polylactide (PLA)-based nanocomposites , 2013 .

[23]  T. Peijs,et al.  High mechanical reinforcing efficiency of layered poly(vinyl alcohol) – graphene oxide nanocomposites , 2015 .

[24]  Jae Whan Cho,et al.  Effect of carbon nanotubes on mechanical and electrical properties of polyimide/carbon nanotubes nanocomposites , 2007 .

[25]  Zhaobin Qiu,et al.  Crystallization kinetics and morphology of biodegradable poly(l-lactic acid)/graphene oxide nanocomposites: Influences of graphene oxide loading and crystallization temperature , 2012 .

[26]  J. Halpin,et al.  Ribbon Reinforcement of Composites , 1968 .

[27]  L. Drzal,et al.  Mechanical properties and morphological characterization of exfoliated graphite–polypropylene nanocomposites , 2007 .

[28]  S. Delalande,et al.  Dispersion of carbon nanotubes in polypropylene via multilayer coextrusion: Influence on the mechanical properties , 2013 .

[29]  T. Peijs,et al.  Conductive network formation in the melt of carbon nanotube/thermoplastic polyurethane composite , 2009 .

[30]  T. Peijs,et al.  Conductive Polymer Tape Containing Highly Oriented Carbon Nanofillers , 2009 .

[31]  Linshu Liu,et al.  Manipulating dispersion and distribution of graphene in PLA through novel interface engineering for improved conductive properties. , 2014, ACS applied materials & interfaces.

[32]  P. Dubois,et al.  Recent advances in production of poly(lactic acid) (PLA) nanocomposites: a versatile method to tune crystallization properties of PLA , 2015 .

[33]  T. Chen,et al.  Isothermal Crystallization of Poly(l-lactide) Induced by Graphene Nanosheets and Carbon Nanotubes: A Comparative Study , 2010 .

[34]  L. Drzal,et al.  Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites , 2015, Journal of Materials Science.

[35]  E. Sakai,et al.  Preparing conductive poly(lactic acid) (PLA) with poly(methyl methacrylate) (PMMA) functionalized graphene (PFG) by admicellar polymerization , 2012 .

[36]  M. Sumita,et al.  A delay of percolation time in carbon-black-filled conductive polymer composites , 2000 .

[37]  J. E. Mark.  Polymer Data Handbook , 2009 .

[38]  B. Chakraborty,et al.  Raman spectroscopy of graphene on different substrates and influence of defects , 2007, 0710.4160.

[39]  J. C. H. Affdl,et al.  The Halpin-Tsai Equations: A Review , 1976 .

[40]  Xiu-li Wang,et al.  Fabrication of graphene/polylactide nanocomposites with improved properties , 2013 .

[41]  G. Shi,et al.  Strong and ductile poly(vinyl alcohol)/graphene oxide composite films with a layered structure , 2009 .

[42]  S. H. Kim,et al.  Rheological and electrical properties of polypropylene/MWCNT composites prepared with MWCNT masterbatch chips , 2008 .

[43]  J. Park,et al.  Effect of exfoliated graphite nanoplatelets on the mechanical and viscoelastic properties of poly(lactic acid) biocomposites reinforced with kenaf fibers , 2012, Journal of Materials Science.

[44]  G. Heinrich,et al.  Analysis of agglomerate dispersion mechanisms of multiwalled carbon nanotubes during melt mixing in polycarbonate , 2010 .

[45]  Qiang Fu,et al.  Controlling the dynamic percolation of carbon nanotube based conductive polymer composites by addition of secondary nanofillers: The effect on electrical conductivity and tuneable sensing behaviour , 2013 .

[46]  Hua Deng,et al.  Fabrication and property prediction of conductive and strain sensing TPU/CNT nanocomposite fibres , 2010 .

[47]  Xiaoqing Liu,et al.  The crystallization behavior and mechanical properties of polylactic acid in the presence of a crystal nucleating agent , 2012 .

[48]  Xiaoshu Zhu,et al.  Starch/polylactide sustainable composites: Interface tailoring with graphene oxide , 2015 .

[49]  Christopher W. Macosko,et al.  Processing-property relationships of polycarbonate/graphene composites , 2009 .

[50]  Elizabeth C. Dickey,et al.  Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites , 2000 .

[51]  Linshu Liu,et al.  Functionalized graphenes with polymer toughener as novel interface modifier for property-tailored polylactic acid/graphene nanocomposites , 2014 .

[52]  M. V. Es.  Polymer-clay nanocomposites: The importance of particle dimensions , 2001 .

[53]  S. Ray,et al.  Crystallization Behavior and Morphology of Biodegradable Polylactide/ Layered Silicate Nanocomposite , 2003 .

[54]  Sabu Thomas,et al.  Evolution from graphite to graphene elastomer composites , 2014 .

[55]  Margaret J. Sobkowicz,et al.  Supramolecular bionanocomposites, part 2: Effects of carbon nanoparticle surface functionality on polylactide crystallization , 2011 .

[56]  C. Macosko,et al.  Graphene/Polymer Nanocomposites , 2010 .

[57]  T. Peijs,et al.  Effect of thermal annealing on the electrical conductivity of high-strength bicomponent polymer tapes containing carbon nanofillers , 2010 .

[58]  T. Peijs,et al.  Effect of melting and crystallization on the conductive network in conductive polymer composites , 2009 .