Effects of a silane treatment on the mechanical interfacial properties of montmorillonite/epoxy nanocomposites

Abstract In this study, montmorillonite (MMT) was modified using silane coupling agents (SCAs) to improve its interfacial adhesion to an epoxy matrix. The effects of the SCAs on the mechanical interfacial properties of MMT/epoxy nanocomposites were investigated by FT-IR, XRD, and TEM and with reference to the surface energetics. In the results, the SCAs led to an improvement of the organic functional groups, including the silanol and siloxane groups, on the MMT surfaces. This surface modification also led to an enhancement of the specific component of the surface free energy of the MMT. Regarding the mechanical interfacial properties, the critical stress intensity factor (KIC) and interlaminar shear stress (ILSS) values for all of the treated MMT/epoxy composites were enhanced; those of the γ-amino propyl triethoxy silane (APS)-treated MMT/epoxy composite showed the highest values of 3.55 MPa m1/2 and 13.8 MPa, respectively.

[1]  S. Hashemi,et al.  Surface modification of bagasse fibers by silane coupling agents through microwave oven and its effects on physical, mechanical, and rheological properties of PP bagasse fiber composite , 2007 .

[2]  J. Rhee,et al.  Cure kinetics of ethylene acrylate rubber/clay nanocomposites , 2008 .

[3]  R. C. Wetherhold,et al.  Oxidation of copper fiber surface to improve fracture toughness of Cu/epoxy composite , 2007 .

[4]  Y. Ke,et al.  The effects of promoter and curing process on exfoliation behavior of epoxy/clay nanocomposites , 2000 .

[5]  R. Vaia,et al.  Tuning Polymer Nanocomposite Morphology: AC Electric Field Manipulation of Epoxy–Montmorillonite (Clay) Suspensions , 2004 .

[6]  Yuewu Huang,et al.  Effect of silane-coupling agents on interfacial properties of CF/PI composites , 2007 .

[7]  Jung-Hyun Lee,et al.  Properties of epoxy molding compound according to the pretreatment method of an amino‐silane coupling agent on epoxy or phenol resin , 2006 .

[8]  J. Donnet,et al.  Evaluation of specific interactions of solid surfaces by inverse gas chromatography , 1991 .

[9]  M. Schwartz.  Composite Materials Handbook , 1984 .

[10]  Byung-Joo Kim,et al.  Roles of acidic functional groups of carbon fiber surfaces in enhancing interfacial adhesion behavior , 2005 .

[11]  Huiru Tang,et al.  Interactions between Nafion resin and protonated dodecylamine modified montmorillonite: a solid state NMR study. , 2007, Journal of colloid and interface science.

[12]  S. Stankovich,et al.  Preparation and characterization of graphene oxide paper , 2007, Nature.

[13]  S. Miao,et al.  Synthesis and characterization of ZnS-montmorillonite nanocomposites and their application for degrading eosin B. , 2006, Journal of colloid and interface science.

[14]  Soojin Park,et al.  London Dispersive Component of the Surface Free-Energy and Surface Enthalpy , 1997 .

[15]  Lu-Kwang Ju,et al.  Estimation of the polar parameters of the surface tension of liquids by contact angle measurements on gels , 1989 .

[16]  Claire Jouany,et al.  Surface Free Energy Components of Clay-Synthetic Humic Acid Complexes from Contact-Angle Measurements , 1991 .

[17]  Jinyang Zheng,et al.  Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics , 2008 .

[18]  T. Pinnavaia,et al.  Intercalated Clay Catalysts , 1983, Science.

[19]  Allan F. M. Barton,et al.  CRC Handbook of solubility parameters and other cohesion parameters , 1983 .