Effects of Short-Time Austenitization on Mechanical Properties and Transformation-Induced Plasticity in Alloyed Austempered Ductile Iron

[1]  O. Sahin,et al.  Effect of Austempering Times on the Microstructures and Mechanical Properties of Dual-Matrix Structure Austempered Ductile Iron (DMS-ADI) , 2021, International Journal of Metalcasting.

[2]  C. Liu,et al.  Wear behavior of a multiphase ductile iron produced by quenching and partitioning process , 2021 .

[3]  W. Gan,et al.  Multi-scale phase analyses of strain-induced martensite in austempered ductile iron (ADI) using neutron diffraction and transmission techniques , 2020, Journal of Materials Science.

[4]  B. Jiang,et al.  Tribological behavior of austempered ductile iron (ADI) obtained at different austempering temperatures , 2020 .

[5]  V. K. Barcellos,et al.  Microstructural and mechanical properties of Cu-Ni-Mn-Mo austempered ductile iron obtained from two-step hot air austempering , 2020 .

[6]  W. Guesser,et al.  Austempered Ductile Iron with Dual Microstructures: Effect of Initial Microstructure on the Austenitizing Process , 2020, International Journal of Metalcasting.

[7]  R. Ghasemi,et al.  Austempered Compacted Graphite Iron — Influence of austempering temperature and time on microstructural and mechanical properties , 2019, Materials Science and Engineering: A.

[8]  M. Górny,et al.  Role of Austenitization Temperature on Structure Homogeneity and Transformation Kinetics in Austempered Ductile Iron , 2019, Metals and Materials International.

[9]  H. Kim,et al.  Development of an Advanced Ultrahigh Strength TRIP Steel and Evaluation of Its Unique Strain Hardening Behavior , 2019, Metals and Materials International.

[10]  R. Reda,et al.  Retained Austenite Attributes and Mechanical Performance of Different Compositions of TRIP Steel Alloys , 2019, Journal of Materials Engineering and Performance.

[11]  A. Basso,et al.  Rolling contact fatigue behavior of dual-phase austempered ductile iron , 2019, Wear.

[12]  J. Bhatt,et al.  The impact of cutting speed and depth of cut on cutting force during turning of austempered ductile iron , 2019, Materials Today: Proceedings.

[13]  G. Gao,et al.  Inverted multi-step bainitic austempering process routes: Enhanced strength and ductility , 2018, Materials Science and Engineering: A.

[14]  M. Warmuzek,et al.  Analysis of thermal stability of ausferrite obtained by means of cyclic heat treatment of Cu–Ni (Mn, Mo) ADI , 2018 .

[15]  D. Celentano,et al.  Sensitivity of Austempering Heat Treatment of Ductile Irons to Changes in Process Parameters , 2018, Metallurgical and Materials Transactions B.

[16]  M. Singh,et al.  Manufacturing of Engineering components with Austempered Ductile Iron – A Review , 2018 .

[17]  G. Barber,et al.  Characteristics of tempering response of austempered ductile iron , 2017 .

[18]  E. Konca,et al.  Effects of Alloying Elements (Mo, Ni, and Cu) on the Austemperability of GGG-60 Ductile Cast Iron , 2017 .

[19]  Ahmed A. Saleh,et al.  Site-specific atomic-scale characterisation of retained austenite in a strip cast TRIP steel , 2017 .

[20]  W. Volk,et al.  Strain-Induced Martensitic Transformation Kinetic in Austempered Ductile Iron (ADI) , 2017, Metallurgical and Materials Transactions A.

[21]  K. Oluwasegun,et al.  Austempered Ductile Iron (ADI): A Review , 2016 .

[22]  Sheng-wu Guo,et al.  Effect of austenite grain size on transformation of nanobainite and its mechanical properties , 2016 .

[23]  C. Tasan,et al.  Spectral TRIP enables ductile 1.1 GPa martensite , 2016 .

[24]  R. González-Martínez,et al.  Advanced Properties of Ausferritic Ductile Iron Obtained in As-Cast Conditions , 2016, International Journal of Metalcasting.

[25]  Susil K. Putatunda,et al.  An investigation on the stability of austenite in Austempered Ductile Cast Iron (ADI) , 2015 .

[26]  L. Šidjanin,et al.  Austempering kinetics of Cu-Ni alloyed austempered Ductile Iron , 2014, Metals and Materials International.

[27]  M. Erdogan,et al.  Effect of Microstructure on Fatigue Strength of Intercritically Austenitized and Austempered Ductile Irons with Dual Matrix Structures , 2013 .

[28]  J. Vižintin,et al.  Improvement of ductile iron wear resistance through local surface reinforcement , 2012 .

[29]  Jhewn-Kuang Chen,et al.  Toughening of ADI Austenitized in Intercritical Region , 2011 .

[30]  M. Erdogan,et al.  Transformation characteristics of ductile iron austempered from intercritical austenitizing temperature ranges , 2009, Journal of Materials Science.

[31]  P. Prasad Rao,et al.  Formation of strain-induced martensite in austempered ductile iron , 2008 .

[32]  G. Lawes,et al.  Development of austenite free ADI (austempered ductile cast iron) , 2006 .

[33]  S. Putatunda,et al.  Improvement in strength and toughness of austempered ductile cast iron by a novel two-step austempering process , 2004 .

[34]  U. Batra,et al.  Austempering and austempered ductile iron microstructure in copper alloyed ductile iron , 2003 .

[35]  B. Bosnjak,et al.  Influence of microalloying and heat treatment on the kinetics of bainitic reaction in austempered ductile iron , 2001 .

[36]  Ḥ. Bayātī,et al.  The Concept of an Austempered Heat Treatment Processing Window , 1999 .

[37]  L. Šidjanin,et al.  Microstructure and fracture of aluminium austempered ductile iron investigated using electron microscopy , 1994 .

[38]  R. Elliott,et al.  Austempering of low manganese ductile irons , 1993 .

[39]  L. Šidjanin,et al.  Metallography of bainitic transformation in austempered ductile iron , 1992 .

[40]  C. M. Hansson,et al.  Cast iron technology , 1989 .